Tuttnauer 3870 EHS (HSG-WS) Инструкция по эксплуатации онлайн [29/58] 387790

4.1 Description and Functions of the Front Panel Keyboard

The command panel is comprised of 3 sections, on the lower section

there are 6 keys; 3 command keys and 3 programming keys.

The middle section consists of the LCD display with two rows and 16

characters on each line.

The top section consists of 4 signal lights that indicate the status of the

autoclave.

1. Sel. Cycle (select cycle) key

Pressing this key selects, in order, one of the 6 programs listed

below. Each time the key is depressed it advances to the next

program (e.g. from program 2 to 3).

If the system is set to program 6, pressing the key returns to

program 1.

This autoclave has the following available programs:

1. Flash for single unwrapped instruments at 273ºF with 3.5

minutes of sterilization time and no drying.

2. Wrapped instruments and materials at 273ºF with 8 minutes of

sterilization and 20 minutes drying.

3. Wrapped or unwrapped instruments and materials at 250ºF with

30 minutes of sterilization and 20 minutes of drying.

4. Model 2540 - Wrapped non-lumened instruments and

materials, at 273ºF with 4 minutes of sterilization and 20

minutes of drying.

Model 3870 - Wrapped instruments, porous load and other

materials, at 273ºF with 8 minutes of sterilization and 20

minutes of drying.

5. Bowie & Dick Test

6. Vacuum Leakage Test

2. Parameters key

Pressing this key displays for 3 seconds the three parameters of the

current program (except for the Bowie & Dick Test and the Vacuum

Leakage Test).

The information is displayed along the top row of the LCD screen

and is as follows:

Sterilization Temp Sterilization Time Dry Time

273ºF

S = 4m D=1Øm

After 3 seconds, or if the parameter key is pressed again, the screen

returns to it’s original program display.