Kress Mission KR111 — основы установки границ для газонокосилки: советы и рекомендации [14/25]

Превью страниц Страница 14 / 25

7. Boundary wire basics

7.1 Pegging the boundary wire

Use the boundary wire distance gauge to set the correct

distance between the wire and the border of your lawn

(more than 26cm*).

* This is the recommended distance. The provided

distance gauge ensures proper installation.

If your neighbor also uses a Mission

, keep a spacing

of at least 1 metre between your boundary wire and your

neighbor’s.

The boundary wire must outline the intended

mowing area exactly. Your Mission

will become

confused by extra bends or coils of boundary wire that are not part of its mowing area (See Fig. I). If there is

excess boundary wire after the mowing area has been outlined, cut it off and store this additional wire in a

separate location. It is important to leave the necessary length where it connects to the charging base so it can

be connected and still remain buried.

7.2 Burying the boundary wire

If you are planning to bury the boundary wire, it is recommended to ﬁrst peg it down. This allows you to easily

change the layout if necessary before burying the wire. When the boundary wire installation is complete, have

Mission

follow and check the path by pressing and . This will allow Mission

to adjust to its new

environment.

While observing Mission

you can easily make alterations to the boundary wire to ensure Mission

trouble-free tracking when locating the charging station. Conﬁrm that Mission

docks in the charging station

successfully, and bury the wire if desired.

7.3 Joining the boundary wire

If you want to extend and splice the boundary wire, use a connector. The connector is waterproof and

provides optimal connection.

Insert both wire ends in any two of the three holes of the connector. Insert the wires fully until both wire ends

are visible on the other side of the connector. (See Fig. J1) Press the connector together by using a pair of

pliers. (See Fig. J2, J3)

WARNING: It is not recommended to simply splice the boundary wire with insulating tape or use a screw

terminal block for connection. A broken circuit may occur after a period of time as soil moisture can

oxidize the wire.

J1 J2