Kress Mission KR111 — решение проблем с зарядной базой и работой устройства [20/25]
Макгруп McGrp.ru

Kress Mission KR111 — решение проблем с зарядной базой и работой устройства [20/25]

Превью страниц Страница 20 / 25
Kress Mission KR110 [20/25] Is connected to your smartphone you can lock it on your smartphone this prevents unauthorised people from being able to use it
20
EN
Charging Base
Blocked
Charging base is
blocked.
1. The contact between the charging and contact pins may be
obstructed in some way.
2. Wipe off the charging and contact pins, making sure there is not an
object obstructing them, then place your Mission
TM
in the charging base
and check that the pins make good connection.
Battery voltage
too low.
Low battery.
In this case you must turn Mission
TM
off and place it in the charging
base, then “Charging” will be shown on screen, which means it starts
charging.
Wire missing!
Press "START"
to reset
Machine can’t find
boundary wire
signal.
If the LED light flashes green, confirm that the boundary wire is well connected
to the clamps on the charging base. If the problem persists, check that the
boundary wire hasn’t been cut.
Mower tilted!
Press "START"
to reset
The main board
detects machine is
rolled or pitched to
a big angle.
1. Turn power off;
2. Take Mission™ to a flat surface, turn power on. Press .
Battery charge
overtemp!
Please wait
cooling down.
Temperature is
too high (more
than 55°C) when
charging.
Place the charging base in a shady area or wait until the temperature has
cooled down.
Can't find
charge station
press "START"
to reset
Boundary wire is
beyond the limited,
machine doesn’t
have enough
power to go back
to charging station.
Reduce the cutting area. The extended boundary wire should not exceed
300m(KR110) / 400m(KR111) or it may cause signal problem.
Mower locked!
“Lock” function is
activated.
Put Mission
TM
in the original network and unlock it by setting “Enable lock” to
“disabled” in mobile App.
NOTES
• Before turning power on, always check Mission
TM
is inside its territory. If not, the message “Outside working
area! Press “START”to reset” will be displayed. This message is displayed also when Mission
TM
is sitting
over the boundary wire when turned on.
• If for any reason—i.e. a party, children playing...—you want to park your Mission™ in the charging base:
press then . Mission™ will go to its base and stay there. Please note Mission™ will now wait
until the next scheduled mowing session. If you want to re-start it, press then to start your
Mission™.
• If an error repeatedly occurs in the same area of your lawn, you might have a problem with the boundary
wire so please refer to the previous installation instructions and check your set up with its help.
• If your lawn is divided in two separated areas, connected by a corridor less than 1m, one of which is not
provided with the charging base: when Mission™ runs out of charge, take it manually to the charging base,
turn power on, press then and the charge process will start.
• If Mission™ runs abnormally once in a while, please try to restart it. If the problem cannot be solved, please
contact Kress service agent for help.
• Do not wash the machine with a high pressure washer. This could cause damage to the battery or the
machine.
12. Security
If Mission
TM
is connected to your smartphone, you can lock it on your smartphone. This prevents
unauthorised people from being able to use it.

Содержание

42

Похожие устройства

Узнайте, как устранить проблемы с зарядной базой, низким уровнем заряда и сигналом границы. Полезные советы для обеспечения правильной работы устройства.

Google Play RuStore