![Kress Mission KR111 — как заменить и чистить лезвия электрического устройства [16/25]](/icons/site-icon-64.png){kind=icon}
Kress Mission KR111 — как заменить и чистить лезвия электрического устройства [16/25]
Превью страниц
Страница 16 /
25
![Kress Mission KR111 Инструкция по эксплуатации(ENG) онлайн [16/25] 389653](/views2/1464821/page16/bg10.png)
16
EN
are chipped or damaged and replace them if they are. When the cutting blades are dull and worn out, they
should be replaced with the spare blades provided with your Mission™. Spare blades are also available at your
nearest Kress retailer.
A. Replace the Blades
After some time, usually every season, your Mission™’s blades will need to be replaced. When replacing the
blades, make sure to replace all of them at the same time. You can replace them with one of the spare blade
kits and extra blade screws supplied with your Mission™.
Before attempting to replace your Mission™’s blades,
turn the power off and put on protective gloves and follow
these steps:
1. Gently flip the Mission™ over.
2. Remove the battery cover and remove the battery.
3. Take the screws off the blades with a screwdriver.
(See Fig. M)
4. Firmly screw on the new blades.
5. Refit the battery and the battery cover.
Important: After screwing the blade to the blade
disc, make sure the blade is able to spin freely.
9.2 Keep it Clean
WARNING:
Before cleaning, turn your Mission™ OFF. Put on protective gloves before cleaning
the blade turning disc and do not rinse or flush with water.
A. Cleaning the Body
Your Mission™ will live a much happier and longer life if
it is cleaned regularly. Since your Mission™ is an electric
machine, you will need to take care when cleaning. DO
NOT use a hose, high pressure washers or otherwise pour
running water on your Mission™. It is best to use a spray
bottle filled with water. When cleaning the machine body,
use a soft brush or clean cloth and avoid using solvents or
polishes (See Fig. N). Lastly, remove all build up of grass
clippings and debris.
B. Cleaning the Underside
Again, it is important that you power the Mission™ OFF and wear protective gloves before touching the
blade turning disc.
First, flip your Mission™ upside down to expose its underside. Here you will see the blade disc, the chassis,
and the front wheel and driving wheels. Clean everything thoroughly with a soft brush or moist rag.
WARNING: NEVER clean the underside of Mission™ with running water.
Component damage
can occur.(See Fig. O1, O2)
Rotate the blade disc to ensure it rotates freely. Check the blades spin freely around the fixing screws. Remove
any obstructions.
IMPORTANT: Remove any lodged debris so that it does not cause a crack in the
blade disc. Even the tiniest crack can decrease your Mission™'s mowing output.
O2
O1
Содержание
42- Owner s manual
- Original instructions
- Product safety
- Information on missio
- Component list
- Technical data and noise data
- Noise data
- Accessories
- Intended use
- Control panel
- Understanding your missio
- Boundary wire basics
- Software update
- Maintenance
- Function messages
- Error messages
- Is connected to your smartphone you can lock it on your smartphone this prevents unauthorised people from being able to use it
- Security
- If mission runs abnormally once in a while please try to restart it if the problem cannot be solved please
- If missio
- Wire so please refer to the previous installation instructions and check your set up with its help
- If for any reason i e a party children playing you want to park your mission in the charging base
- Until the next scheduled mowing session if you want to re start it press then to start your
- If an error repeatedly occurs in the same area of your lawn you might have a problem with the boundary
- The contact between the charging and contact pins may be obstructed in some way 2 wipe off the charging and contact pins making sure there is not an object obstructing them then place your missio
- Do not wash the machine with a high pressure washer this could cause damage to the battery or the
- Provided with the charging base when mission runs out of charge take it manually to the charging base turn power on press then and the charge process will start
- Contact kress service agent for help
- Press then mission will go to its base and stay there please note mission will now wait
- Before turning power on always check missio
- Off and place it in the charging base then charging will be shown on screen which means it starts charging
- Area press start to reset will be displayed this message is displayed also when missio
- Mission
- Machine
- Is sitting over the boundary wire when turned on
- Is inside its territory if not the message outside working
- In this case you must turn missio
- In the charging base and check that the pins make good connection
- If your lawn is divided in two separated areas connected by a corridor less than 1m one of which is not
- Troubleshooting
- Environmental protection
- Declaration of conformity
Похожие устройства
-
Kress Mission KR110Инструкция по эксплуатации(ENG) -
Kress Mission NanoИнструкция по эксплуатации(ENG) -
Stiga AUTOCLIP 920 SИнструкция по эксплуатации -
Stiga AUTOCLIP 720 SИнструкция по эксплуатации -
Stiga AUTOCLIP 527 SИнструкция по эксплуатации -
Stiga AUTOCLIP 527Инструкция по эксплуатации
-
Stiga AUTOCLIP 525 SИнструкция по эксплуатации -
Stiga AUTOCLIP 525Инструкция по эксплуатации
-
Stiga AUTOCLIP 523Инструкция по эксплуатации
-
Stiga AUTOCLIP 520Инструкция по эксплуатации
-
Stiga AUTOCLIP 325Инструкция по эксплуатации -
Stiga AUTOCLIP 145 4WDИнструкция по эксплуатации
Узнайте, как правильно заменить и чистить лезвия вашего электрического устройства. Следуйте простым шагам для обеспечения долговечности и эффективности работы.