![Kress Mission KR111 — решение проблем с зарядкой и работой газонокосилки [22/25]](/icons/site-icon-64.png){kind=icon}
Kress Mission KR111 — решение проблем с зарядкой и работой газонокосилки [22/25]
Превью страниц
Страница 22 /
25
![Kress Mission KR110 Инструкция по эксплуатации(ENG) онлайн [22/25] 389652](/views2/1464821/page22/bg16.png)
22
EN
The charging time is far more
than the rated charging time.
Poor connection caused by
debris on the charging strip.
Clean the contact pins located on the
charging base and the charging strip on
Mission™ using a cloth.
The charging protection
program has activated due to
high temperature.
Place the charging base in a shady area
or wait until the temperature has cooled
down.
The mower does not charge.
There is no power.
Check the power cord is connected
properly to the charger and the charger
is connected to a suitable power
supply.
Does not operate correctly
while manually charging.
Refer to manual charging
Mission™ is starting to have
shorter run-times between
charges.
Something is clogging in the
blade disc.
Take off the blade disc and clean it.
The grass is too high and too thick.
Mission™ is shaking heavily.
Check the blade disc and blades,
remove debris and foreign objects from
the blades and blade disc.
The battery may be exhausted
or old.
Replace battery.
Mission™ is not operating at
the correct time.
The clock is not set to the
correct time.
Set the clock to the correct time.
Programmed cutting times for
Mission™ are not correct.
Change the time settings for the mower
to start and stop.
Mission™ is manually docked in
the charging base.
Press START and then OK.
Mission
TM
cannot correctly
dock with the charging base.
Environmental influences. Restart Mission™.
Poor connection caused by
debris on the charging strip.
Clean the contact pins located on the
charging base and the charging strip on
Mission
TM
using a cloth.
The green light on the
charging base turns on before
charging is complete.
The charging base is overheating,
the LED will display “Battery charge
overtemp! Please wait cooling
down”.
Place the charging base in a shady area or
wait until the temperature has cooled down.
Mission
TM
runs outside the
boundary wire. Mission
TM
does
not mow an area within a
boundary wire zone. Mission
TM
reverses or rotates erratically
near the boundary wire.
The boundary wire of another
Mission™ or another branded
robotic mower is positioned too
closely.
Ensure your Mission™ boundary wire
has at least 1m of spacing between the
neighboring boundary wire.
The boundary wire has been
installed with tight corners.
Check the boundary wire to ensure the
corners are smooth.
In wet conditions, the boundary
wire electric signal may leak
were wire has been joined or
repaired.
Check boundary wire joints. Insulate to
provide a fully waterproof connection.
There is boundary wire electric
signal leakage due to broken
insulation.
Repair damaged boundary wire
insulation with insulation tape.
The cutting area is larger than
the allowable cutting area for
Mission™.
Contact service agent.
Содержание
42- Owner s manual
- Original instructions
- Product safety
- Information on missio
- Component list
- Technical data and noise data
- Noise data
- Accessories
- Intended use
- Control panel
- Understanding your missio
- Boundary wire basics
- Software update
- Maintenance
- Function messages
- Error messages
- Is connected to your smartphone you can lock it on your smartphone this prevents unauthorised people from being able to use it
- Security
- If mission runs abnormally once in a while please try to restart it if the problem cannot be solved please
- If missio
- Wire so please refer to the previous installation instructions and check your set up with its help
- If for any reason i e a party children playing you want to park your mission in the charging base
- Until the next scheduled mowing session if you want to re start it press then to start your
- If an error repeatedly occurs in the same area of your lawn you might have a problem with the boundary
- The contact between the charging and contact pins may be obstructed in some way 2 wipe off the charging and contact pins making sure there is not an object obstructing them then place your missio
- Do not wash the machine with a high pressure washer this could cause damage to the battery or the
- Provided with the charging base when mission runs out of charge take it manually to the charging base turn power on press then and the charge process will start
- Contact kress service agent for help
- Press then mission will go to its base and stay there please note mission will now wait
- Before turning power on always check missio
- Off and place it in the charging base then charging will be shown on screen which means it starts charging
- Area press start to reset will be displayed this message is displayed also when missio
- Mission
- Machine
- Is sitting over the boundary wire when turned on
- Is inside its territory if not the message outside working
- In this case you must turn missio
- In the charging base and check that the pins make good connection
- If your lawn is divided in two separated areas connected by a corridor less than 1m one of which is not
- Troubleshooting
- Environmental protection
- Declaration of conformity
Похожие устройства
-
Kress Mission KR110Инструкция по эксплуатации(ENG) -
Kress Mission NanoИнструкция по эксплуатации(ENG) -
Stiga AUTOCLIP 920 SИнструкция по эксплуатации -
Stiga AUTOCLIP 720 SИнструкция по эксплуатации -
Stiga AUTOCLIP 527 SИнструкция по эксплуатации -
Stiga AUTOCLIP 527Инструкция по эксплуатации
-
Stiga AUTOCLIP 525 SИнструкция по эксплуатации -
Stiga AUTOCLIP 525Инструкция по эксплуатации
-
Stiga AUTOCLIP 523Инструкция по эксплуатации
-
Stiga AUTOCLIP 520Инструкция по эксплуатации
-
Stiga AUTOCLIP 325Инструкция по эксплуатации -
Stiga AUTOCLIP 145 4WDИнструкция по эксплуатации
Узнайте, как устранить проблемы с зарядкой, настройками и работой газонокосилки. Чистка контактов, проверка проводов и установка времени помогут восстановить функциональность.