![Tp-Link CPE610 V1 [12/120] Ap client router wisp client](/img/pdf.png)
Tp-Link CPE610 V1 [12/120] Ap client router wisp client
![Tp-Link CPE610 V1 [12/120] Ap client router wisp client](/views2/1467704/page12/bgc.png)
8
Modem for internet access. Meanwhile, it creates a wireless network for the wireless
clients to connect to the internet.
Note:
In this mode, the device cannot be managed directly through the port connected to ADSL/Cable
Modem. To manage the device, you can connect the management host to the device wirelessly or
via the other LAN port.
1.6 AP Client Router (WISP Client)
In AP Client Router mode, the device access the internet provided by WISP (Wireless
Internet Service Provider) through wireless connection. For the downstream clients, the
device serves as a normal home wireless router. It can provide wired connection and
wireless connection simultaneously.
AP Client Router
LAN: 192.168.0.254
WAN: Dynamic IP
WISP
WISP’s network
User Network
Network requirements: Get internet service from WISP.
The device in the network: The device in Client Router Mode connects to WISP wirelessly
for internet service. It provides both wired access and wireless access for the clients.
Содержание
- For tp link pharos series products 1
- User guide 1
- 1 operation modes 3 2
- 2 quick start 9 2
- 3 monitor the network 8 2
- About this user guide 1 2
- Contents 2
- Overview 2 2
- 4 configure the network 9 3
- 5 configure the wireless parameters 5 3
- 6 manage the device 4 3
- 7 configure the system 104 4
- 8 use the system tools 110 4
- About this user guide 5
- Convention 5
- More info 5
- Overview 6
- 1 operation modes 7
- Operation modes 7
- Access point 8
- Client 9
- Repeater range extender 10
- Ap router 11
- Bridge 11
- Ap client router wisp client 12
- 2 quick start 13
- Quick start 13
- Check the system requirements 14
- Log in to the device 14
- Set up the wireless network 15
- Access point 16
- In the wireless ap settings section specify the basic wireless parameters to create a 18
- Wireless network click next 18
- Client 20
- In the wireless client settings section specify the wireless parameters to connect to 22
- The specified wireless network click next 22
- Repeater range extender 23
- In the finish section review the configurations and click finish to complete the quick 26
- Bridge 27
- In the wireless client settings section specify the wireless parameters to connect to 29
- The specified wireless network click next 29
- Ap router 31
- In the finish section review the configurations and click finish to complete the quick 35
- Ap client router wisp client 36
- In the wireless client settings section specify the wireless parameters to connect to 40
- Select the desired wireless network and click connect 40
- The specified wireless network click next 40
- 3 monitor the network 42
- Monitor the etwork 42
- View the device information 43
- View the wireless settings 43
- Go to the status page in the wireless signal quality section you can view the current 44
- Range extender bridge and ap client router wisp client modes 44
- Signal quality of the upstream wireless network it is only applicable for the client repeater 44
- View wireless signal quality 44
- Device 45
- Go to the status page in the radio status section you can view the radio status of the 45
- View radio status 45
- Device to configure the lan settings refer to 4 configure the network 47
- Go to the status page in the lan section you can view the lan information of the 47
- Go to the status page in the wan section you can view the wan information of the 47
- View the lan settings 47
- View the wan settings 47
- Go to the status page in the monitor section select stations and you can monitor the 48
- Go to the status page in the monitor section select throughput and you can monitor 48
- Information of all the stations that are connected to the device 48
- Monitor stations 48
- Monitor throughput 48
- The current data traffic of specified interfaces including lan wan and bridge 48
- Go to the status page in the monitor section select interfaces and you can monitor the 49
- Monitor interfaces 49
- Relevant information of the interfaces 49
- Arp address resolution protocol information recorded by the device 50
- Arp is used to associate each ip address to the unique hardware mac address of each 50
- Device on the network 50
- Go to the status page in the monitor section select arp table and you can monitor the 50
- Go to the status page in the monitor section select routes and you can monitor the 50
- Monitor arp table 50
- Monitor routes 50
- Routing entries recorded by the device 50
- Routing table is used for the device to decide the interface to forward the packets 50
- Go to the status page in the monitor section select dhcp clients and you can monitor 51
- Monitor dhcp clients 51
- Monitor dynamic wan 51
- The information of all the dhcp clients 51
- Go to the status page in the monitor section select dynamic wan and you can monitor 52
- The wan connection status of the device 52
- 4 configure the network 53
- Configure the network 53
- Configure wan parameters 54
- Dynamic 55
- For connecting to the internet you don t need to configure any parameters 55
- For this connection your isp uses a dhcp server to assign your router an ip address 55
- If your isp delivers internet through phone line and provides you with username and 56
- Name and password that the isp supplied note that these fields are case sensitive 56
- Password you should choose this type under this condition you should fill in both user 56
- Access point client repeater bridge mode 61
- Click apply then click save 61
- Configure lan parameters 61
- Follow the steps below to configure the lan parameters 61
- Go to the network page in the lan section configure the following parameters 61
- Lan submenu is used to configure the lan parameters for the device and the clients 61
- Select the connection type according to your need the device supports two types 61
- Static and dynamic 61
- Static 62
- Dynamic 63
- Ap router ap client router mode 64
- Click apply then click save 64
- For lan connection type the device only supports static 64
- Go to the network page in the lan section configure the following parameters 64
- A switch and set up correct vlan settings to ensure the communication between the host 66
- And the device in the management vlan 66
- Area network is private ip address the hosts using private ip addresses cannot access 66
- Click apply then click save 66
- Configure management vlan 66
- Configure the forwarding feature 66
- Go to the network page in the management vlan interfaces section enable the 66
- Management vlan function specify vlan id and click apply then click save 66
- Management vlan provides a safer way for you to manage the device with management 66
- Most hosts cannot process vlan tags connect the management host to the network via 66
- The internet directly and vice versa 66
- The ip address used on the internet is public ip address while ip address used on local 66
- Vlan enabled only the hosts in the management vlan can manage the device since 66
- And click apply then click save 67
- Function should be used including dmz virtual server port triggering and upnp 67
- Go to the network page in the forwarding section configure the following parameters 67
- If the hosts on the internet want to visit the hosts on local area network the forwarding 67
- Realize the communication from internal hosts to external hosts 67
- The hosts using private ip addresses visit internet through nat network address 67
- Translation technology nat can transfer private ip addresses into public ip addresses to 67
- Configure the security feature 70
- Connections such as tcp streams udp communication traveling across it the firewall 70
- Firewall and others will be rejected spi firewall is enabled by factory default 70
- Is programmed to distinguish legitimate packets for different types of connections only 70
- Packets matching a known active connection will be allowed to pass through by the 70
- Stateful packet inspection spi is a firewall that keeps track of the state of network 70
- Basic section configure the following 71
- Parameters and click apply 71
- Advanced settings section configure the following parameters and 72
- Click apply 72
- Click save 73
- Configure access control 73
- Controlled by the filtering policy 73
- Go to the network page in the access control section enable access control and 73
- Network for example the online time limit and the specified web stations to visit can be 73
- Select the filtering policy 73
- The function can be used to control the internet activities of hosts in the local area 73
- A static route is a pre determined path that network information must travel to reach a 74
- Click add and create the filtering entries 74
- Click save and click apply then click save 74
- Configure static routing 74
- Experienced administrator 74
- Network overhead and improve the speed of forwarding packets 74
- Specific host or network if static route is used properly in the network it can decrease the 74
- Static routing is generally suitable for simple network environment in which users clearly 74
- Topology structure this function should be used with caution or under the guidance of the 74
- Understand the topology of the network so as to set the routing information correctly 74
- When the network topology is complicated and users are not so familiar with the 74
- And lower limit in the bandwidth of the computer network and guarantee a smooth sharing 75
- Bandwidth control function is used to control the internet bandwidth in the local area 75
- Click save and click apply then click save 75
- Configure bandwidth control 75
- Device allocate reasonable bandwidth to the clients and achieve the purpose of efficient 75
- Following parameters 75
- Go to the network page in the static routing section click add and specify the 75
- Network 75
- Network in the case of insufficient bandwidth resources enable the function to make the 75
- Use of the existing bandwidth via ip bandwidth control function you can set the upper 75
- Click add and specify the following parameters 76
- Control function 76
- Go to the network page in the bandwidth control section enable the bandwidth 76
- Configure ip mac binding 77
- Enable the desired entry and click save click apply then click save 78
- 5 configure the wireless parameters 79
- Configure the wireless parameters 79
- Configure basic wireless parameters 80
- Go to the wireless page in the basic wireless settings section configure the basic 80
- This section allows you to configure wireless basic parameters such as 802 1 mode 80
- Transmit power and data rates 80
- Wireless settings and click apply then click save 80
- Are the same as the upstream wireless network s 82
- Configure wireless client parameters 82
- Following parameters 82
- Go to the wireless page in the wireless client settings section configure the 82
- In this section you can configure wireless client parameters used for the connection with 82
- Specify the security mode make sure the security mode and the related parameters 82
- The root ap 82
- No need to enter a password to access the wireless network 83
- Select this option if the root ap has no encryption when connecting to the root ap it s 83
- That wep has security flaws and can easily be cracked so wep is rarely used in normal 83
- Wep wired equivalent privacy is a traditional encryption method it has been proved 83
- Wireless network select this option if the security mode of the root ap is wep 83
- And wap psk it requires a radius server to authenticate the clients via 802 x and 84
- Eap extensible authentication protocol wpa can generate different passwords 84
- For different clients which ensures higher network security but it also costs more to 84
- Maintain the network so it is more suitable for business networks 84
- Wpa wi fi protected access is a safer encryption method compared with wep 84
- Characterized by high safety and simple settings so it is mostly used by common 85
- Households and small businesses 85
- Wpa psk 85
- Wpa psk wi fi protected access psk is based on a pre shared key it is 85
- Configure wireless ap parameters 86
- Network data is not encrypted but you can still authenticate clients by enabling the 87
- Radius mac authentication function 87
- Select none when you want an open network without wireless security in this mode 87
- Also support them 88
- Protection for wireless networks since wpa psk and wpa enterprise are much safer 88
- Than wep we recommend that you choose wpa psk or wpa enterprise if your clients 88
- That wep has security flaws and can easily be cracked so wep cannot provide effective 88
- Wep wired equivalent privacy is a traditional encryption method it has been proved 88
- And wap psk it requires a radius server to authenticate the clients via 802 x and 89
- Eap extensible authentication protocol wpa can generate different passwords 89
- For different clients which ensures higher network security but it also costs more to 89
- Maintain the network so it is more suitable for business networks 89
- Wpa wi fi protected access is a safer encryption method compared with wep 89
- Characterized by high safety and simple settings so it is mostly used by common 91
- Households and small businesses 91
- Wpa psk 91
- Wpa psk wi fi protected access psk is based on a pre shared key it is 91
- Click apply then click save 92
- Configure multi ssid 92
- Create a new wireless network 92
- Device adds different vlan tag to the clients which connect to the corresponding wireless 92
- Go to the wireless page in the multi ssid section enable multi ssid click add and 92
- Multi ssid function is enabled the vlan function is enabled at the same time it can work 92
- Network the clients in different vlans cannot directly communicate with each other 92
- The device can build up to four virtual wireless networks for users to access when the 92
- The wired client can communicate with all the wireless clients despite the vlan settings 92
- Together with switches supporting 802 q vlan and supports maximum four vlans the 92
- Click apply then click save 93
- Select the desired ssid and specify the security 93
- Access the wireless network or not thereby it can effectively control the user access in the 94
- Click add and specify the following parameters 94
- Click save and click apply then click save 94
- Configure wireless mac filtering 94
- Go to the wireless page in the wireless mac filtering section enable this feature and 94
- Specify the filtering rule 94
- Wireless mac filtering function uses mac addresses to determine whether one host can 94
- Wireless network this function is available in all modes except the client mode 94
- Configure advanced wireless parameters 95
- Go to the wireless page in the advanced wireless settings section specify the following 95
- Parameters and click apply then click save 95
- Rts threshold and dim interval 95
- This section is used to specify the advanced wireless parameters such as beacon interval 95
- 6 manage the device 98
- Manage the device 98
- Go to the management page in the system log section you can perform the following 99
- Manage system logs 99
- Operations 99
- System logs record the events and activities while the device is running if a failure happens on 99
- The router system logs can help to diagnose the issue 99
- Click the setting button to specify the auto mail settings 100
- Features and click apply 100
- Go to the management page in the miscellaneous section configure the following 100
- Specify the miscellaneous parameters 100
- This section is used to specify miscellaneous parameters 100
- Click save 101
- Configure ping watch dog 101
- Configure the following features click apply 101
- Failure then the device will automatically reboot 101
- Go to the management page in the ping watch dog section enable this feature and 101
- Internet gateway for example to check the network connectivity if there is a connection 101
- Listens for icmp echo response if the defined number of replies is not received the tool 101
- Ping watch dog is dedicated to continuously monitoring the connectivity to a specific host 101
- Ping watch dog sets the device to continuously ping a user defined ip address it can be the 101
- Reboots the device 101
- Using the ping tool the ping tool sends icmp echo request packets to the target host and 101
- Click save 102
- Configure dynamic dns 102
- Click apply then click save 103
- Configure web server 103
- Go to the management page in the dynamic dns section configure the following 103
- Parameters and click login 103
- This function is used to configure the related parameters of web server users can log in to the 103
- Web management page to manage this device remotely over the internet through web server 103
- Click apply then click save 104
- Configure snmp agent 104
- Go to the management page in the web server section configure the following 104
- Parameters and click apply 104
- You can get the traffic information and transmit condition by using the snmp agent function 104
- Configure the device as snmp agent and it can receive and process the management 105
- Go to the management page in the snmp agent section configure the following 105
- Include monitoring network performance detecting and analyzing network error configuring 105
- Message from the network management system 105
- Network devices and so on when the network working normally snmp can monitor the 105
- Parameters and click apply 105
- Simple network management protocol snmp is an application layer protocol that facilitates 105
- Statistics configuration when networks have troubles snmp can detect and restore these 105
- The exchange of management information between network devices main functions of snmp 105
- Troubles 105
- All the transmission data and prevent the information in remote management from being 106
- Can be easily intercepted ssh can provide information security and powerful authentication 106
- Click apply then click save 106
- Click save 106
- Configure rssi led thresholds 106
- Configure ssh server 106
- Connection on the ssh client software 106
- Encrypted connection is similar to a telnet connection but essentially the old telnet remote 106
- Go to the management page in the ssh server section configure the following 106
- Leaked 106
- Management method is not safe because the password and data transmitted with plain text 106
- Parameters and click apply 106
- Ssh secure shell is a security protocol established on application and transport layers ssh 106
- The ssh server function is used for the users to log in and manage the device through ssh 106
- Values defined in the following fields this function can help a technician to easily deploy a 106
- When you log in this device remotely through an insecure network environment it can encrypt 106
- You can configure the leds on the device to light up when received signal levels reach the 106
- Click apply then click save 107
- Following parameters and click apply 107
- Go to the management page in the rssi led thresholds section configure the 107
- Operation 107
- Pharos series product without logging into the device for example for antenna alignment 107
- 7 configure the system 108
- Configure the system 108
- Configure device information 109
- Configure location information 109
- Configure user account 109
- Click save 110
- Configure time settings 110
- Go to the system page in the time settings section configure the system time 110
- Go to the system page in the user account section configure the following 110
- In this section you can configure the system time and the daylight saving time 110
- Parameters and click apply 110
- Automatically 111
- Click synchronize with pc s clock to synchronize the system time with the pc s time 111
- Click the setting button to specify the daylight saving time 111
- Configure the system time manually 111
- Manually 111
- Predefined mode 111
- Select predefined mode and select the predefined daylight saving time schedule for 111
- Specify the ntp server then click the get gmt button to get the system time from 111
- The device 111
- The ntp server 111
- Click apply then click save 112
- Configuration will be used every year 112
- Configuration will be used only one time 112
- File then click upload 112
- Go to the system page in the firmware update section click browser to select a firmware 112
- Recurring mode 112
- Select date mode and configure the related parameters for the device this 112
- Select recurring mode and configure the related parameters for the device this 112
- This section is used to view the current firmware and update the firmware of the device 112
- Update firmware 112
- Configure other settings 113
- Device 113
- Go to the system page in the configuration section you can perform the following operations 113
- This section is used to back up or upload the configuration file reset the device and reboot the 113
- 8 use the system tools 114
- Use the system tools 114
- Click ping from the drop down list on the upper right corner and specify the following 115
- Click start 115
- Configure ping 115
- Configure traceroute 115
- Parameters 115
- Ping test function is used to test the connectivity and reachability between the device and 115
- The target host so as to locate the network malfunctions 115
- To a given target host when malfunctions occur in the network you can troubleshooting 115
- Tracertroute function is used to tracks the route packets taken from source on their way 115
- With traceroute utility 115
- As a client the client launches the test request to the server and the server respond to it 116
- Click start 116
- Click traceroute from the drop down list on the upper right corner and specify the 116
- Following parameters 116
- Same network the test requires one of the two devices to be set as a server and the other 116
- Speed test tool is used for testing the throughput between two pharos products in the 116
- Test speed 116
- The test result will display on the page of the client 116
- Click speed test from the drop down list on the upper right corner and specify the 117
- Click start 117
- Following parameters 117
- Survey 117
- The survey tool is used to survey the wireless network around the device 117
- Appear 118
- Click survey from the drop down list on the upper right corner and the following page will 118
- Analyze spectrum 119
- Copyright trademarks 120
Похожие устройства
- Tp-Link CPE610 V1 Даташит
- Tp-Link CPE610 V1 Руководство по установке Outdoor CPE
- Tp-Link CPE610 V1 Руководство по установке
- CARLIEUKLIMA EUVENT HCBIG 10/640 Инструкция по эксплуатации
- Michael Kors MK6684 Инструкция по эксплуатации
- CARLIEUKLIMA EUVENT HCBIG 10/810 Инструкция по эксплуатации
- Michael Kors MK6689 Инструкция по эксплуатации
- Michael Kors MK8077 Инструкция по эксплуатации
- Michael Kors MK8107 Инструкция по эксплуатации
- Michael Kors MK8184 Инструкция по эксплуатации
- Michael Kors MK8280 Инструкция по эксплуатации
- Michael Kors MK8281 Инструкция по эксплуатации
- Michael Kors MK8286 Инструкция по эксплуатации
- Michael Kors MK8344 Инструкция по эксплуатации
- Michael Kors MK8362 Инструкция по эксплуатации
- Michael Kors MK8405 Инструкция по эксплуатации
- Pioneer DEX-P9R Руководство пользователя
- Pioneer FH-460UI Руководство пользователя
- Pioneer FH-P4000R Руководство по установке
- Pioneer FH-P4100R Руководство по установке
Скачать
Случайные обсуждения