Tp-Link TD-W8960N V4 [15/20] Internet parameters configuration

Enter the VPI and VCI

values given by your ISP

Internet Parameters Configuration

ADSL WAN Type

This page will then display.

Click Next

Note

If you are unwilling to configure WAN Service now, you can click the Skip

WAN button, and you can configure it in the Layer2 Interface referring to

User Guide later.

Choose the WAN Type for

Internet access.

If ADSL WAN is selected,

please continue to read this

guide;

If Ethernet WAN is selected,

please refer to section 4.4. 2

WAN Service in User Guide;

Choose the WAN Link Type

given by your ISP.

If PPPoE or PPPoA is selected,

please proceed to A;

If IPoE is selected, please skip

to B;

If IPoA is selected, please skip

to C;

If Bridge is selected, please

skip to D.

Bridge mode is not recommended because multiple computers are not

permitted to share Internet access in this mode.

Note

If you did not get the VPI, VCI and WAN Link Type information, please

contact your ISP for this information.