Tp-Link TL-PA4010P KIT V1 [10/28] Physical interface

TL-PA4010P AV500 Powerline Adapter With AC Pass Through

Solid

The Ethernet port is connected, but there is no data

being transferred.

Blinking The Ethernet port is transferring data.

Ethernet LED

Off The Ethernet port isn’t connected.



Note:

5 minutes after the device connected to the adapter is turned off, and the adapter will automatically

switch to the power-saving Mode. In power-saving mode, the Homeplug cannot be accessed via the

electrical wiring, but its integrated electrical socket can supply the power normally. As soon as the device

connected to the Homeplug is switched on again, your Homeplug will leave the power-saving mode and

the three LEDs will flash simultaneously.

1.4 Physical Interface

There are four physical interfaces on this Powerline Adapter.

Power Plug

Ethernet Port

Pair Button

Integrated

Electrical Socket

Interface Description

Ethernet Port

It is a 10/100Mbps Ethernet port on the adapter for connecting it to

the PC or the broadband device with the network cable.

Power Plug*

A Power Plug connected to any 100V ~ 240V AC (50~60Hz) power

socket

Pair Button

Pair buttons are used to secure a powerline network. To secure

your network, please follow the steps below. Firstly, plug in a new

adapter, and press its pair button for 1 second; then plug in another

adapter and press its pair button for 1 second as well. The two

buttons should be pressed within 2 minutes of each other. After

that, wait about 60 seconds so that the two adapters can finish

connecting.

Integrated Electrical

Socket

The integrated electrical socket allows additional devices or

multiple sockets to be connected to the adapter just like to a normal

wall socket. No electrical socket is lost.

* The provided power plug may differ from the picture due to different regional power specifications. Here

we take the EU version as an example.