Tp-Link TL-PA4010P KIT V1 [25/28] Reset device

TL-PA4010P AV500 Powerline Adapter With AC Pass Through

 Note:

The parameter information of PIB will restore to the factory defaults after resetting the PLC.

To upgrade the device's firmware, follow these instructions:

1. Download PIB file and firmware upgrade file from the TP-LINK website (www.tp-link.com).

2. Enter the path name or click

to select the downloaded files on the computer into the

corresponding blanks.

3. Click the OK button.

 Note:

Do not turn off the device while the firmware is being upgraded. The device will reboot after the

Upgrading has been finished.

4.4.2 Reset Device

This Management Utility allows you to reset the Powerline Adapter to its default settings.

 Reset Local Device: Click this button to reset the settings of the local Powerline Adapter device

only.

 Reset All Devices: Click this button to reset the settings of all devices that appear on the

Network configuration homepage whose Device’s Password had been entered for the same

logical network.

4.4.3 Set All Devices’ Network Name

The Set All

Devices’ Network Name button allows you to change the logical network of all devices that

appear on the Network configuration homepage whose Device’s Password had been entered for the

same logical network. A dialog window will appear to report the success of this operation.

All Powerline devices are shipped using a default logical network (network name), which is normally

“HomePlugAV”.

To set all devices’ network name, please type the name in the field and click the Set Network Name to

apply the setting.



Note:

Every Powerline Adapter on your home network MUST have the same Network Password for

connectivity to be established throughout your home.