Tp-Link T2500-28TC V1 [11/28] Installation tools

L2 Managed Switch

instant current is strong enough to damage electronic devices, more effective lightning

protection measures should be taken.

■

Ensure the rack and device are well earthed.

■

Make sure the power socket has a good contact with the ground.

■

Keep a reasonable cabling system and avoid induced lightning.

■

Use the signal SPD (Surge Protective Device) when wiring outdoor.

Note:

For detailed lightning protection measures, please refer to Chapter 3

Lightning Protection.

Installation Site

T2500-28TC

When installing the device on a rack or a flat workbench, please note the following

items:

■

The rack or workbench is flat and stable, and sturdy enough to support the weight of

5.5kg at least.

■

The rack or workbench has a good ventilation system. The equipment room is well

ventilated.

■

The rack is well grounded. Keep the power socket less than 1.5 meters away from the

device.

2.3 Installation Tools

■

Phillips screwdriver

■

ESD-preventive wrist wrap

■

Cabl es

Note:

These tools are not provided with our product. If needed, please purchase them.

2.4 Product Installation

■

Desktop Installation

To install the device on the desktop, please follow the steps below:

1. Set the device on a flat surface strong enough to support the entire weight of the

device with all fittings.

2. Remove the adhesive backing papers from the rubber feet.

Installation