![Hikoki G 13SB3 [4/152] Additional safety warnings specific for abrasive cutting off operations](/img/pdf.png)
Hikoki G 13SB3 [4/152] Additional safety warnings specific for abrasive cutting off operations
![Hikoki G 13SB3 [4/152] Additional safety warnings specific for abrasive cutting off operations](/views2/1366177/page4/bg4.png)
4
English
b) The grinding surface of centre depressed wheels
must be mounted below the plane of the guard lip.
An improperly mounted wheel that projects through the
plane of the guard lip cannot be adequately protected.
c)
The guard must be securely attached to the power
tool and positioned for maximum safety, so the least
amount of wheel is exposed towards the operator.
The guard helps to protect the operator from broken
wheel fragments, accidental contact with wheel and
sparks that could ignite clothing.
d) Wheels must be used only for recommended
applications. For example: do not grind with the
side of cut-off wheel.
Abrasive cut-off wheels are intended for peripheral
grinding, side forces applied to these wheels may cause
them to shatter.
e) Always use undamaged wheel fl anges that are of
correct size and shape for your selected wheel.
Proper wheel fl anges support the wheel thus reducing
the possibility of wheel breakage. Flanges for cut-off
wheels may be diff erent from grinding wheel fl anges.
f) Do not use worn down wheels from larger power
tools.
Wheel intended for larger power tool is not suitable for
the higher speed of a smaller tool and may burst.
ADDITIONAL SAFETY WARNINGS
SPECIFIC FOR ABRASIVE CUTTING-
OFF OPERATIONS
a) Do not “jam” the cut-off wheel or apply excessive
pressure. Do not attempt to make an excessive
depth of cut.
Overstressing the wheel increases the loading and
susceptibility to twisting or blinding of the wheel in the
cut and the possibility of kickback or wheel breakage.
b) Do not position your body in line with and behind
the rotating wheel.
When the wheel, at the point of operation, is moving
away from your body, the possible kickback may propel
the spinning wheel and the power tool directly at you.
c) When wheel is binding or when interrupting a cut
for any reason, switch off the power tool and hold
the power tool motionless until the wheel comes to
a complete stop. Never attempt to remove the cut-
off wheel from the cut while the wheel is in motion
otherwise kickback may occur.
Investigate and take corrective action to eliminate the
cause of wheel binding.
d) Do not restart the cutting operation in the workpiece.
Let the wheel reach full speed and carefully re-enter
the cut.
The wheel may bind, walk up or kickback if the power
tool is restarted in the workpiece.
e) Support panels or any oversized workpiece to
minimize the risk of wheel pinching and kickback.
Large workpieces tend to sag under their own weight.
Supports must be placed under the workpiece near the
line of cut and near the edge of the workpiece on both
sides of the wheel.
f) Use extra caution when making a “pocket cut” into
existing walls or other blind areas.
The protruding wheel may cut gas or water pipes,
electrical wiring or objects that can cause kickback.
GENERAL SAFETY INSTRUCTIONS
FOR GRINDERS
– Check that speed marked on the wheel is equal to or
greater than the rated speed of the grinder;
– Ensure that the wheel dimensions are compatible with
the grinder;
– Abrasive wheels shall be stored and handled with care in
accordance with manufacturer’s instructions;
– Inspect the grinding wheel before use, do not use
chipped, cracked or otherwise defective products;
– Ensure that mounted wheels and points are fi tted in
accordance with the manufacturer’s instructions;
– Ensure that blotters are used when they are provided
with the bonded abrasive product and when they are
required;
– Ensure that the abrasive product is correctly mounted
and tightened before use and run the tool at no-load for
30 seconds in a safe position, stop immediately if there
is considerable vibration or if other defects are detected.
If this condition occurs, check the machine to determine
the cause;
– If a guard is equipped with the tool never use the tool
without such a guard;
– When using a abrasive cutting wheel, be sure to remove
the standard accessory wheel guard and attach the
wheel guard with side guard (sold separately) (Fig. 4);
– Do not use separate reducing bushings or adapters to
adapt large hole abrasive wheels;
– For tools intended to be fi tted with threaded hole wheel,
ensure that the thread in the wheel is long enough to
accept the spindle length;
– Check that the work piece is properly supported;
– Do not use cutting off wheel for side grinding;
– Ensure that sparks resulting from use do not create
a hazard e.g. do not hit persons, or ignite fl ammable
substances;
– Ensure that ventilation openings are kept clear when
working in dusty conditions, if it should become
necessary to clear dust, fi rst disconnect the tool from
the mains supply (use non metallic objects) and avoid
damaging internal parts;
– Always use eye and ear protection. Other personal
protective equipment such as dust mask, gloves, helmet
and apron should be worn;
– Pay attention to the wheel that continues to rotate after
the tool is switched off .
ADDITIONAL SAFETY WARNINGS
1. Ensure that the power source to be utilized conforms
to the power requirements specifi ed on the product
nameplate.
2. Ensure that the power switch is in the OFF position. If the
plug is connected to a receptacle while the power switch
is in the ON position, the power tool will start operating
immediately, which could cause a serious accident.
3. When the work area is removed from the power source,
use an extension cord of suffi cient thickness and rated
capacity. The extension cord should be kept as short as
practicable.
4. Ensure that mounted wheels and points are fi tted in
accordance with the manufacturer’s instructions.
Ensure that the depressed center wheel to be utilized is
the correct type and free of cracks or surface defects.
Also ensure that the depressed center wheel is properly
mounted and the wheel nut is securely tightened.
Ensure that blotters are used when they are provided
with the bonded abrasive product and when they are
required.
Do not use separate reducing bushings or adaptors to
adapt large hole abrasive wheels.
For tools intended to be fi tted with threaded hole wheel,
ensure that the thread in the wheel is long enough to
accept the spindle length.
5. Do not use cutting off wheel for side grinding.
0000Book_G12SA3.indb 40000Book_G12SA3.indb 4 2014/10/31 10:15:082014/10/31 10:15:08
Содержание
- G 12sa3 g 13sb3 1
- English 2
- General power tool safety warnings 2
- English 3
- Kickback and related warnings 3
- Safety warnings common for grinding or abrasive cutting off operations 3
- Safety warnings specific for grinding and abrasive cutting off operations 3
- Additional safety warnings 4
- Additional safety warnings specific for abrasive cutting off operations 4
- English 4
- General safety instructions for grinders 4
- Applications 5
- English 5
- Mounting and operation 5
- Specifications 5
- Standard accessories 5
- Symbols 5
- English 6
- Maintenance and inspection 6
- Allgemeine sicherheitshinweise für elektrogeräte 7
- Deutsch 7
- Deutsch 8
- Für schleif und trennschleifarbeiten geltende sicherheitshinweise 8
- Besondere sicherheitshinweise für schleif bzw trennschleifarbeiten 9
- Deutsch 9
- Rückschlag und dazu gehörige sicherheitshinweise 9
- Weitere sicherheitshinweise zu trennschleifarbeiten 9
- Allgemeine sicherheitshinweise für schleifgeräte 10
- Deutsch 10
- Zusätzliche sicherheitswarnungen 10
- Anwendungsgebiete 11
- Deutsch 11
- Montage und betrieb 11
- Standardzubehör 11
- Symbole 11
- Technische daten 11
- Deutsch 12
- Wartung und inspektion 12
- Avertissements de sécurité généraux pour l outil 13
- Français 13
- Avertissements de sécurité courants pour les opérations de meulage ou de découpage par abrasion 14
- Français 14
- Avertissements de sécurité propres aux opérations de découpage par abrasion 15
- Avertissements de sécurité propres aux opérations de meulage et de découpage par abrasion 15
- Consignes de sécurité générales pour les meuleuses 15
- Français 15
- Recul et avertissements connexes 15
- Avertissements de sécurité supplémentaires 16
- Français 16
- Symboles 16
- Accessoires standard 17
- Applications 17
- Caractéristiques 17
- Entretien et vérification 17
- Français 17
- Installation et fonctionnement 17
- Français 18
- Avvertimenti generali di sicurezza sugli utensili elettrici 19
- Italiano 19
- Avvertimenti di sicurezza comuni per le operazioni di smerigliatura o di taglio abrasivo 20
- E il diametro esterno e lo spessore del vostro accessorio devono rientrare entro la capacità nominale dell utensile elettrico 20
- Italiano 20
- Avvertimenti di sicurezza aggiuntivi specifici per le operazioni di taglio abrasivo 21
- Avvertimenti di sicurezza specifici per le operazioni di smerigliatura e di taglio abrasivo 21
- Istruzioni di sicurezza generali per smerigliatrici 21
- Italiano 21
- Rinculo e relative avvertenze 21
- Italiano 22
- Precauzioni di sicurezza aggiuntive 22
- Simboli 22
- Accessori standard 23
- Applicazioni 23
- Caratteristiche 23
- Italiano 23
- Manutenzione ed ispezione 23
- Montaggio e operazione 23
- Italiano 24
- Algemene veiligheidswaarschuwingen voor elektrisch gereedschap 25
- Nederlands 25
- Nederlands 26
- Veiligheidswaarschuwingen voor slijpen en doorslijpen 26
- Aanvullende specifieke veiligheidswaarschuwingen voor doorslijpen 27
- Nederlands 27
- Specifieke veiligheidswaarschuwingen voor slijpen en doorslijpen 27
- Terugslag en daarmee verband houdende waarschuwingen 27
- Aanvullende veiligheidswaarschuwingen 28
- Algemene veiligheidsinstructies voor slijpmachines 28
- Nederlands 28
- Montage en gebruik 29
- Nederlands 29
- Onderhoud en inspectie 29
- Standaard toebehoren 29
- Symbolen 29
- Technische gegevens 29
- Toepassingen 29
- Nederlands 30
- Advertencias de seguridad general de la herramienta eléctrica 31
- Español 31
- Advertencias comunes de seguridad para las operaciones de molido o corte abrasivo 32
- Español 32
- Advertencias de seguridad adicionales específicas para las operaciones de corte abrasivo 33
- Advertencias de seguridad específicas para las operaciones de molido y corte abrasivo 33
- Español 33
- Retroceso y advertencias relacionadas 33
- Advertencias de seguridad adicionales 34
- Español 34
- Instrucciones de seguridad generales para amoladoras 34
- Símbolos 34
- Accessorios estándar 35
- Aplicación 35
- Español 35
- Especificaciones 35
- Mantenimiento e inspección 35
- Montaje y funcionamiento 35
- Español 36
- Avisos gerais de segurança para a ferramenta elétrica 37
- Português 37
- Avisos de segurança comuns para operações de retificação ou corte abrasivo 38
- Português 38
- Recuo e avisos relacionados 38
- Avisos de segurança adicionais específicos para operações de corte abrasivo 39
- Avisos de segurança específicos para operações de retificação ou corte abrasivo 39
- Instruções de segurança gerais para rebarbadoras 39
- Português 39
- Avisos de segurança adicionais 40
- Português 40
- Símbolos 40
- Acessórios padrão 41
- Aplicações 41
- Especificações 41
- Manutenção e inspeção 41
- Montagem e utilização 41
- Português 41
- Português 42
- Allmänna säkerhetsvarningar för elektriska verktyg 43
- Svenska 43
- Kast och tillhörande varningar 44
- Svenska 44
- Säkerhetsvarningar vanliga för slipnings eller slipande kapningsarbeten 44
- Allmänna säkerhetsinstruktioner för vinkelslipar 45
- Svenska 45
- Säkerhetsvarningar speciella för slipnings och slipande kapningsarbeten 45
- Ytterligare säkerhetsvarningar 45
- Ytterligare säkerhetsvarningar för slipande kapningsarbeten 45
- Användningsområden 46
- Standardtillbehör 46
- Svenska 46
- Symboler 46
- Tekniska data 46
- Montering och användning 47
- Svenska 47
- Underhåll och inspektion 47
- Generelle sikkerhedsadvarsler for elektrisk værktøj 48
- Generelle sikkerhedsadvarsler for slibning eller slibende afskæringsfunktioner 49
- Tilbageslag og relaterede advarsler 49
- Ekstra sikkerhedsforskrifter for slibende afskæringsfunktioner 50
- Generelle sikkerhedsforskrifter for vinkelslibere 50
- Særlige sikkerhedsforskrifter for slibning og slibende afskæringsfunktioner 50
- Ekstra sikkerhedsadvarsler 51
- Symboler 51
- Anvendelse 52
- Montering og anvendelse 52
- Specifikationer 52
- Standardtilbehør 52
- Vedligeholdelse og eftersyn 52
- Generelle sikkerhetsforholdsregler for elektroverktøy 54
- Sikkerhetsinstrukser for vanlig sliping og kutt operasjoner 55
- Tilbakeslag og relaterte advarsler 55
- Ekstra sikkerhetsinstrukser spesifikt for kutt operasjoner 56
- Flere sikkerhetsadvarsler 56
- Generelle sikkerhetsinstruksjoner for slipemaskiner 56
- Sikkerhetsinstrukser spesifikt for sliping og kutt operasjoner 56
- Anvendelse 57
- Spesifikasjoner 57
- Standard tilbehør 57
- Symboler 57
- Montering og bruk 58
- Vedlikehold og inspeksjon 58
- Yleiset sähkötyökalun turvallisuutta koskevat varoitukset 59
- Takapotku ja siihen liittyvät varoitukset 60
- Turvallisuutta koskevia varoituksia hiontaa ja katkaisuhiontaa varten 60
- Lisää turvallisuutta koskevia varoituksia 61
- Lisää turvallisuutta koskevia varoituksia katkaisuhiontaa varten 61
- Turvallisuutta koskevia varoituksia erityisesti hiontaa ja katkaisuhiontaa varten 61
- Yleisiä hiomakoneen käyttöä koskevia turvaohjeita 61
- Perusvarusteet 62
- Sovellukset 62
- Symbolit 62
- Tekniset tiedot 62
- Huolto ja tarkastus 63
- Kiinnittäminen ja käyttö 63
- Γενικεσ προειδοποιησεισ ασφαλειασ του ηλεκτρικου εργαλειου 64
- Ελληνικά 64
- Ελληνικά 65
- Κοινεσ προειδοποιησεισ ασφαλειασ για λειανση η εργασιεσ κοπησ 65
- Ειδικεσ προειδοποιησεισ ασφαλειασ για εργασιεσ λειανσησ η κοπησ 66
- Ελληνικά 66
- Οπισθια κινηση και σχετικεσ προειδοποιησεισ 66
- Προσθετεσ ειδικεσ προειδοποιησεισ ασφαλειασ για εργασίεσ λειανσησ η κοπησ 66
- Γενικεσ οδηγιεσ ασφαλειασ για τροχουσ 67
- Ελληνικά 67
- Προσθετεσ προειδοποιησεισ ασφαλειασ 67
- Βασικα εξαρτηματα 68
- Ελληνικά 68
- Εφαρμογεσ 68
- Στερεωση και λειτουργια 68
- Συμβολα 68
- Τεχνικα χαρακτηριστικα 68
- Ελληνικά 69
- Συντηρηση και ελεγχοσ 69
- Ogólne wskazówki bezpieczeństwa dotyczące elektronarzędzi 70
- Polski 70
- Ogólne wskazówki bezpieczeństwa dotyczące szlifowania i cięcia 71
- Polski 71
- Dodatkowe wskazówki bezpieczeństwa dotyczące szlifowania i cięcia 72
- Odbicie i powiązane z nim ostrzeżenia 72
- Ogólne wskazówki bezpieczeństwa dotyczące cięcia 72
- Polski 72
- Dodatkowe wskazówki bezpieczeństwa 73
- Ogólne wskazówki bezpieczeństwa dotyczące szlifowania 73
- Polski 73
- Akcesoria standardowe 74
- Montaż i praca 74
- Polski 74
- Specyfikacje techniczne 74
- Symbole 74
- Zastosowania 74
- Konserwacja i kontrola 75
- Polski 75
- A szerszámgéppel kapcsolatos általános biztonsági figyelmeztetések 76
- Magyar 76
- Biztonsági figyelmeztetések csiszoló és vágó műveletekhez 77
- Magyar 77
- Visszarúgás és erre vonatkozó figyelmeztetések 77
- A csiszolási és darabolási műveletekre vonatkozó biztonsági figyelmeztetések 78
- A daraboló műveletekre vonatkozó kiegészítő biztonsági figyelmeztetések 78
- Csiszolókra vonatkozó általános biztonsági utasítások 78
- Magyar 78
- Magyar 79
- Szimbólumok 79
- További biztonsági figyelmeztetések 79
- Alkalmazási területek 80
- Karbantartás és ellenőrzés 80
- Magyar 80
- Műszaki adatok 80
- Szabványos kiegészítők 80
- Összeszerelés és használat 80
- Magyar 81
- Obecná bezpečnostní varování týkající se bezpečnosti elektrického nánářadí 82
- Čeština 82
- Bezpečnostní varování společné pro broušení a abrazivní řezání 83
- Upozornění na zpětný ráz 83
- Čeština 83
- Bezpečnostní varování pro broušení a řezání 84
- Doplňující bezpečnostní varování pro řezání 84
- Všeobecné bezpečnostní pokyny pro brusky 84
- Čeština 84
- Další bezpečnostní varování 85
- Standardní příslušenství 85
- Symboly 85
- Čeština 85
- Montáž a provoz 86
- Použití 86
- Specifikace 86
- Údržba a kontrola 86
- Čeština 86
- Čeština 87
- Genel elektri kli alet güvenli k uyarilari 88
- Türkçe 88
- Geri tepme ve i lgi li uyarilar 89
- Taşlama veya aşindirarak kesme i şlemleri i çi n genel güvenli k uyarilari 89
- Türkçe 89
- Aşindirarak kesme i şlemleri i çi n özel i lave güvenli k uyarilari 90
- Kalipçi taşlamalar i çi n genel güvenli k tali matlari 90
- Taşlama ve aşindirarak kesme i şlemleri i çi n özel güvenli k uyarilari 90
- Türkçe 90
- I lave güvenli k uyarilari 91
- Semboller 91
- Standart aksesuarlar 91
- Türkçe 91
- Bakim ve muayene 92
- Montaj ve çaliştirma 92
- Tekni k özelli kler 92
- Türkçe 92
- Uygulamalar 92
- Türkçe 93
- Avertismente generale privind siguranţa sculelor electrice 94
- Română 94
- Avertismente de siguranţă generale pentru operaţiunile de șlefuire sau tăiere abrazivă 95
- Reculul și avertismentele aferente 95
- Română 95
- Avertismente de siguranţă specifice pentru operaţiunile de șlefuire și tăiere abrazivă 96
- Avertismente suplimentare de siguranţă specifice pentru operaţiunile tăiere abrazivă 96
- Instrucţiuni generale de siguranţă pentru polizoare 96
- Română 96
- Accesorii standard 97
- Avertismente suplimentare privind siguranţa 97
- Română 97
- Simboluri 97
- Aplicaţii 98
- Asamblare și operare 98
- Română 98
- Specificaţii 98
- Întreţinere și verificare 98
- Română 99
- Slovenščina 100
- Splošna varnostna navodila za električna orodja 100
- Povratni udarec in ustrezna opozorila 101
- Slovenščina 101
- Varnostna opozorila značilna za brušenje ali rezanje 101
- Dodatna varnostna opozorila 102
- Dodatna varnostna opozorila za rezanje 102
- Slovenščina 102
- Splošna varnostna navodila za brusilnike 102
- Varnostna opozorila za brušenje in rezanje 102
- Simboli 103
- Slovenščina 103
- Specifikacije 103
- Standardna pribor 103
- Uporaba 103
- Namestitev in delovanje 104
- Slovenščina 104
- Vzdrževanje in pregledovanje 104
- Slovenčina 105
- Všeobecné bezpečnostné výstrahy pre elektrické náradie 105
- Bezpečnostné výstrahy spoločné pre činnosti brúsenia a rozbrusovania 106
- Slovenčina 106
- Spätný náraz a príslušné varovania 106
- Bezpečnostné výstrahy charakteristické pre činnosti brúsenia a rozbrusovania 107
- Dodatočné bezpečnostné výstrahy charakteristické pre činnosti brúsenia a rozbrusovania 107
- Slovenčina 107
- Všeobecné bezpečnostné pokyny pre brúsky 107
- Slovenčina 108
- Symboly 108
- Ďalšie bezpečnostné varovania 108
- Montáž a obsluha 109
- Použitie 109
- Slovenčina 109
- Technické parametre 109
- Údržba a kontrola 109
- Štandardné príslušenstvo 109
- Slovenčina 110
- Български 111
- Общи мерки за безопасност при използване на електрически инструменти 111
- Български 112
- Предупреждения за безопасност общи за операции включващи шлифоване или абразивно рязане 112
- Български 113
- Допълнителни предупреждения за безопасност специфични за операции включващи абразивно рязане 113
- Предупреждения за безопасност специфични за операции включващи шлифоване или абразивно рязане 113
- Предупреждения за откат и свързани с това опасности 113
- Български 114
- Допълнителни предупреждения за безопасност 114
- Общи инструкции за безопасност за шлайфмашини 114
- Български 115
- Монтаж и експлоатация 115
- Приложения 115
- Символи 115
- Спецификации 115
- Стандартни аксесоари 115
- Български 116
- Поддръжка и инспекция 116
- Opšta bezbednosna upozorenja za električni alat 117
- Srpski 117
- Bezbednosna upozorenja za postupke brušenja ili abrazivnog sečenja 118
- Povratni udar i slična upozorenja 118
- Srpski 118
- Bezbednosna upozorenja specifična za postupke brušenja i abrazivnog sečenja 119
- Dodatna bezbednosna upozorenja specifična za postupke abrazivnog sečenja 119
- Opšta bezbednosna uputstva za brusilice 119
- Srpski 119
- Dodatna bezbednosna upozorenja 120
- Oznake 120
- Srpski 120
- Standardni pribor 120
- Montaža i upotreba 121
- Održavanje i provera 121
- Primene 121
- Specifikacije 121
- Srpski 121
- Srpski 122
- Hrvatski 123
- Općenita sigurnosna upozorenja za električne alate 123
- Hrvatski 124
- Povratni udar i povezana upozorenja 124
- Sigurnosna upozorenja za sve operacije brušenja ili abrazivnog rezanja 124
- Dodatna sigurnosna upozorenja 125
- Dodatna sigurnosna upozorenja specifična za operacije abrazivnog rezanja 125
- Hrvatski 125
- Opće sigurnosne upute za brusilice 125
- Sigurnosna upozorenja specifična za operacije brušenja i abrazivnog rezanja 125
- Hrvatski 126
- Simboli 126
- Specifikacije 126
- Standardna oprema 126
- Vrste primjene 126
- Hrvatski 127
- Montaža i rad 127
- Održavanje i inspekcija 127
- Загальні інструкції безпеки електричного інструменту 128
- Українська 128
- Загальні попередження про обережність для проведення шліфувальних робіт або відрізання 129
- Українська 129
- Віддача і пов язані з нею небезпеки 130
- Додаткові заходи безпеки спеціально для абразивного різання 130
- Заходи безпеки під час шліфування і абразивного обрізування 130
- Українська 130
- Додаткові правила безпеки 131
- Загальні інструкції безпеки для шліфувальної машини 131
- Українська 131
- Області застосування 132
- Символи 132
- Стандартні аксесуари 132
- Технічне обслуговування і перевірка 132
- Технічні характеристики 132
- Українська 132
- Установка та експлуатація 132
- Українська 133
- Общие правила безопасности при работе с электроинструментом 134
- Русский 134
- Общие предупреждения об осторожности для проведения шлифовальных работ или отрезания 135
- Русский 135
- Особые меры предосторожности для режущих работ и абразивной отрезки 136
- Отдача и другие похожие предупреждения 136
- Русский 136
- Дополнительные особые меры предосторожности для абразивной отрезки 137
- Общие инструкции по технике безопасности для шлифовальных машин 137
- Русский 137
- Дополнительные указания по обеспечению безопасности 138
- Русский 138
- Символы 138
- Назначение 139
- Русский 139
- Стандартные принадлежности 139
- Технические характеристики 139
- Техническое обслуживание и осмотр 139
- Установка и эксплуатация 139
- Русский 140
- Book_g12sa3 indb 147 0000book_g12sa3 indb 147 2014 10 31 10 15 37 2014 10 31 10 15 37 147
- Certificado de garantia 147
- Certificado de garantía 147
- Certificat de garantie 147
- Certificat de garanţie 147
- Certificato di garanzia 147
- Deutsch norsk slovenščina 147
- English dansk română 147
- Español magyar hrvatski 147
- Français suomi slovenčina 147
- Garancia bizonylat 147
- Garancijsko potrdilo 147
- Garanti serti fi kasi 147
- Garantibevis 147
- Garanticertifikat 147
- Garantiebewijs 147
- Garantieschein 147
- Garantisertifikat 147
- Garantni sertifikat 147
- Guarantee certificate 147
- Gwarancja 147
- Italiano ελληνικά български 147
- Jamstveni certifikat 147
- Nederlands polski srpski 147
- Português čeština український 147
- Svenska türkçe русский 147
- Takuutodistus 147
- Záruční list 147
- Záručný lista 147
- Πιστοποιητικο εγγυησησ 147
- Гарантийный сертификат 147
- Гарантійний сертифікат 147
- Гаранционен сертификат 147
- Hitachi fercad power tools italia s p a 149
- Hitachi power tools belgium n v s a 149
- Hitachi power tools czech s r o 149
- Hitachi power tools denmark a s 149
- Hitachi power tools europe gmbh 149
- Hitachi power tools finland oy 149
- Hitachi power tools france s a s 149
- Hitachi power tools hungary kft 149
- Hitachi power tools lberica s a 149
- Hitachi power tools netherlands b v 149
- Hitachi power tools netherlands b v moscow branch 149
- Hitachi power tools norway as 149
- Hitachi power tools polska sp z o o 149
- Hitachi power tools romania s r l 149
- Hitachi power tools sweden ab 149
- Hitachi power tools u k ltd 149
- Hitachi power tools österreich gmbh 149
- A yoshida vice president director 150
- Deutsch español 150
- English nederlands 150
- Français português 150
- Head offi ce in japan hitachi koki co ltd shinagawa intercity tower a 15 1 konan 2 chome minato ku tokyo japan 150
- Hitachi koki europe ltd clonshaugh business technology park dublin 17 lreland 150
- Italiano svenska 150
- John de loughry european standard manager 150
- Representative offi ce in europe hitachi power tools europe gmbh siemensring 34 47877 willich 1 f r germany 150
- A yoshida vice president director 151
- Dansk polski 151
- Head offi ce in japan hitachi koki co ltd shinagawa intercity tower a 15 1 konan 2 chome minato ku tokyo japan 151
- Hitachi koki europe ltd clonshaugh business technology park dublin 17 lreland 151
- John de loughry european standard manager 151
- Norsk magyar 151
- Representative offi ce in europe hitachi power tools europe gmbh siemensring 34 47877 willich 1 f r germany 151
- Suomi čeština 151
- Ελληνικά 151
- A yoshida vice president director 152
- Code no c99701371 e printed in ireland 152
- Head offi ce in japan hitachi koki co ltd shinagawa intercity tower a 15 1 konan 2 chome minato ku tokyo japan 152
- Hitachi koki europe ltd clonshaugh business technology park dublin 17 lreland 152
- John de loughry european standard manager 152
- Representative offi ce in europe hitachi power tools europe gmbh siemensring 34 47877 willich 1 f r germany 152
- Română srpski 152
- Slovenčina український 152
- Slovenščina hrvatski 152
- Русский 152
Похожие устройства
- Pierre Ricaud P97241.5153Q Инструкция по эксплуатации
- Pierre Ricaud P97241.5155Q Инструкция по эксплуатации
- Hikoki G 15VA Инструкция по эксплуатации
- Pierre Ricaud P97242.2123Q Инструкция по эксплуатации
- Pierre Ricaud P97242.5123Q Инструкция по эксплуатации
- Pierre Ricaud P97242.5126Q Инструкция по эксплуатации
- Hikoki G 18ST Инструкция по эксплуатации
- Pierre Ricaud P97243.5122Q Инструкция по эксплуатации
- Hikoki G 23UC Инструкция по эксплуатации
- Hikoki G 23SWU Инструкция по эксплуатации
- Hikoki G 23SU Инструкция по эксплуатации
- Hikoki G 23ST Инструкция по эксплуатации
- Hikoki G 23SEY Инструкция по эксплуатации
- Hikoki G 23SCY Инструкция по эксплуатации
- Hikoki G 23MRUA Инструкция по эксплуатации
- Hikoki G 23MR Инструкция по эксплуатации
- Hikoki RH 650V Инструкция по эксплуатации
- Hikoki RH 600T Инструккция по эксплуатации
- Hikoki M 8V2 Инструкция по эксплуатации
- Hikoki M 8SA2 Инструкция по эксплуатации