![Gigabyte GA-8I945GMMFY-RH [67/88] English](/img/pdf.png)
Gigabyte GA-8I945GMMFY-RH [67/88] English
![Gigabyte GA-8I945GMMFY-RH [67/88] English](/views2/1047199/page67/bg43.png)
Appendix- 67 -
English
Intel(R) Matrix Storage Manager option ROM v5.7.0.1007 ICH7MR
Copyright(C) 2003-04 Intel Corporation. All Rights Reversed.
[ CREATE VOLUME MENU ]
[ HELP ]
Choose the RAID level best suited to your usage model.
RAID0- Data striped across multiple physical drives for performance.
RAID1- Data mirrored across multiple physical drives for redundancy.
[]-Change [TAB]-Next [ESC]-Previous Menu [ENTER]-Select
Name : RAID_Volume0
RAID Level : RAID0(Stripe)
Disks : Select Disks
Strip Size : 128KB
Capacity : 223.6 GB
Create Volume
Step 4:
Set the stripe block size (Figure 7). The KB is the standard unit of stripe block size. The stripe block size
can be set from 4KB to 128KB. After the setting, press ENTER to set array capacity.
Figure 7
Figure 6
Step 3:
After entering the Create Volume Menu screen, name the disk array with 1~16 letters (letters cannot be
special characters) under the Name item. When finished, press ENTER to select a RAID level (Figure
6). There are four RAID levels: RAID0, RAID1. Select a RAID level and press ENTER.
Intel(R) Matrix Storage Manager option ROM v5.7.0.1007 ICH7MR
Copyright(C) 2003-05 Intel Corporation. All Rights Reversed.
[ CREATE VOLUME MENU ]
[ HELP ]
The following are typical values:
RAID 0 - 128KB
[]-Change [TAB]-Next [ESC]-Previous Menu [ENTER]-Select
Name : RAID_Volume0
RAID Level : RAID0(Stripe)
Disks : Select Disks
Strip Size : 128KB
Capacity : 223.6 GB
Create Volume
Содержание
- Duo processor motherboard 1
- Ga 8i945gmmfy rh 1
- Me 945gmmfy 1003r 1
- Rev 1003 1
- User s manual 1
- Copyright 3
- Notice 3
- Product manual classification 3
- Chapter 1 hardware installation 9 4
- Chapter 2 bios setup 29 4
- Item checklist 6 optional accessories 6 ga 8i945gmmfy rh motherboard layout 7 block diagram 8 4
- Table of contents 4
- Chapter 3 install drivers 47 5
- Chapter 4 appendix 51 5
- Item checklist 6
- Optional accessories 6
- Ga 8i945gmmfy rh 7
- Ga 8i945gmmfy rh motherboard layout 7
- Block diagram 8
- 1 considerations prior to installation 9
- Chapter 1 hardware installation 9
- English 9
- Installation notices 9
- Instances of non warranty 9
- Preparing your computer 9
- 2 feature summary 10
- English 10
- English 11
- 3 1 installation of the cpu 12
- 3 installation of the cpu and cpu cooler 12
- English 12
- 3 2 installation of the cpu cooler 13
- English 13
- 4 installation of memory 14
- English 14
- 5 installation of expansion cards 15
- English 15
- 6 i o back panel introduction 16
- English 16
- Ieee 1394 port 16
- Lan port 16
- Line in 16
- Line out front speaker out 16
- Mic in 16
- Parallel port 16
- Ps 2 keyboard and ps 2 mouse connector 16
- Rear speaker out 16
- Serial port coma 16
- Usb port 16
- Vga port 16
- 7 connectors introduction 17
- Center subwoofer speaker out 17
- English 17
- Side speaker out 17
- 2 atx_12v atx power connector 18
- English 18
- Ga 8i945gmmfy rh motherboard 18 18
- With the use of the power connector the power supply can supply enough stable power to all the components on the motherboard before connecting the power connector please make sure that all components and devices are properly installed align the power connector with its proper location on the motherboard and connect tightly the atx_12v power connector mainly supplies power to the cpu if the atx_12v power connector is not connected the system will not start caution please use a power supply that is able to handle the system voltage requirements it is recommended that a power supply that can withstand high power consumption be used 300w or greater if a power supply is used that does not provide the required power the result can lead to an unstable system or a system that is unable to start if you use a 24 pin atx power supply please remove the small cover on the power connector on the motherboard before plugging in the power cord otherwise please do not remove it 18
- 4 cpu_fan sys_fan cooler fan power connector 19
- English 19
- Ide1 ide connector 19
- English 20
- Fdd fdd connector 20
- Ga 8i945gmmfy rh motherboard 20 20
- Sata can provide up to 150mb s transfer rate please refer to the bios setting for theserial ata and install the proper driver in order to work properly 20
- Sataii_0 sataii_2 serial ata connector 20
- The fdd connector is used to connect the fdd cable while the other end of the cable connects to the fdd drive the types of fdd drives supported are 360kb 720kb 1 mb 1 4mb and 2 8mb please connect the red power connector wire to the pin1 position 20
- English 21
- F_panel front panel connector 21
- Hardware installation 21 21
- Please connect the power led pc speaker reset switch and power switch etc of your chassis front panel to the f_panel connector according to the pin assignments below 21
- By default the audio driver is configured to support hd audio to connect an ac97 front panel audio module to this connector please refer to the instructions on page 74 about the software settings 22
- English 22
- F_audio front audio panel connector 22
- Ga 8i945gmmfy rh motherboard 22 22
- Pwr_led 22
- The pwr_led connector is connected with the system power indicator to indicate whether the system is on off it will blink when the system enters suspend mode 22
- This connector supports either hd high definition or ac97 front panel audio module if you wish to use the front audio function connect the front panel audio module to this connector check the pin assignments carefully while you connect the front panel audio module incorrect connection between the module and connector will make the audio device unable to work or even damage it for optional front panel audio module please contact your chassis manufacturer 22
- Cd_in cd in connector 23
- Connect cd rom or dvd rom audio out to the connector 23
- English 23
- Hardware installation 23 23
- Spdif_io spdif in out 23
- The spdif output is capable of providing digital audio to external speakers or compressed ac3 data to an external dolby digital decoder use this feature only when your stereo system has digital input function use spdif in feature only when your device has digital output function be careful with the polarity of the spdif_io connector check the pin assignment carefully while you connect the spdif cable incorrect connection between the cable and connector will make the device unable to work or even damage it for optional spdif cable please contact your local dealer 23
- Be careful with the polarity of the front usb connector check the pin assignment carefully while you connect the front usb cable incorrect connection between the cable and connector will make the device unable to work or even damage it for optional front usb cable please contact your local dealer 24
- English 24
- F1_1394 f2_1394 ieee 1394 connector 24
- F_usb1 f_usb2 front usb connectors 24
- Ga 8i945gmmfy rh motherboard 24 24
- Serial interface standard set by institute of electrical and electronics engineers which has features like high speed highbandwidth and hot plug be careful with the polarity of the ieee1394 connector check the pin assignment carefully while you connect the ieee1394 cable incorrect connection between the cable and connector will make the device unable to work or even damage it for optional ieee1394 cable please contact your local dealer 24
- Be careful with the polarity of the comb connector check the pin assignments while you connect the comb cable please contact your nearest dealer for optional comb cable 25
- Comb comb connector 25
- English 25
- Hardware installation 25 25
- Please contact your nearest dealer for optional tpm cable 25
- Tpm connector 25
- Ci chassis intrusion case open 26
- Clr_cmos clear cmos 26
- English 26
- Ga 8i945gmmfy rh motherboard 26 26
- Short the two pins default doesn t include the jumper to avoid improper use of this header 26
- This 2 pin connector allows your system to detect if the chassis cover is removed you can check the case opened status in bios setup 26
- You may clear the cmos data to its default values by this header to clear cmos temporarily 26
- Bat battery 27
- English 27
- Hardware installation 27 27
- English 28
- Chapter 2 bios setup 29
- Control keys 29
- English 29
- Main menu 29
- Status page setup menu option page setup menu 29
- English 30
- For boot menu 30
- Ga 8i945gmmfy rh motherboard 30 30
- If you can t find the setting you want please press ctrl f1 to search the advanced option hidden please load optimized defaults in the bios when somehow the system works not stable as usual this action makes the system reset to the default for stability the bios setup menus described in this chapter are for reference only and may differ from the exact settings for your motherboard 30
- Select boot sequence for onboard or add on cards device 30
- The main menu for example bios ver d1 30
- To accept or enter the sub menu 30
- To exit this menu 30
- English 31
- 1 standard cmos features 32
- Access mode use this to set the access mode for the hard drive the four options are chs lba large auto default auto 32
- Access mode use this to set the access mode for the hard drive the two options are large auto default auto 32
- Capacity capacity of currectly installed hard drive 32
- Day the day from 1 to 31 or the maximum allowed in the month 32
- English 32
- Ga 8i945gmmfy rh motherboard 32 32
- Ide channel 0 master slave 32
- Ide channel 2 master slave 32
- Ide hdd auto detection press enter to select this option for automatic device detection extended ide drive you can use one of the two methods auto allows bios to automatically detect ide devices during post default none select this if no ide devices are used and the system will skip the automatic detection step and allow for faster system start up 32
- Ide hdd auto detection press enter to select this option for automatic device detection ide channel 0 master slave ide devices setup you can use one of three methods auto allows bios to automatically detect ide devices during post default value none select this if no ide devices are used and the system will skip the automatic detection step and allow for faster system start up manual user can manually input the correct settings 32
- Month the month jan through dec 32
- The time is calculated base on the 24 hour military time clock for example 1 p m is 13 00 00 32
- Week the week from sun to sat determined by the bios and is display only 32
- Year the year from 1999 through 2098 32
- Base memory 33
- Drive a drive b 33
- English 33
- Extended memory 33
- Floppy 3 mode support for japan area 33
- Halt on 33
- Memory 33
- Total memory 33
- 2 advanced bios features 34
- Cdrom select your boot device priority by cdrom 34
- Disabled disable this function 34
- English 34
- First second third boot device 34
- Floppy select your boot device priority by floppy 34
- Ga 8i945gmmfy rh motherboard 34 34
- Hard disk boot priority 34
- Hard disk select your boot device priority by hard disk 34
- Lan select your boot device priority by lan 34
- Ls120 select your boot device priority by ls120 34
- Note this item will show up when you install a processor which supports this function 34
- Password check 34
- Setup the system will boot but access to setup will be denied if the correct password is not entered at the prompt default value 34
- System the system can not boot and can not access to setup page will be denied if the correct password is not entered at the prompt 34
- To exit this menu 34
- Usb cdrom select your boot device priority by usb cdrom 34
- Usb fdd select your boot device priority by usb fdd 34
- Usb hdd select your boot device priority by usb hdd 34
- Usb zip select your boot device priority by usb zip 34
- Zip select your boot device priority by zip 34
- Cpu eist functio 35
- Cpu enhanced halt c1e 35
- Cpu thermal monitor 2 tm2 35
- English 35
- Limit cpuid max to 3 35
- No execute memory protec 35
- On chip frame buffer size 35
- Virtualization technology 35
- 3 integrated peripherals 36
- Ahci set the onboard sata controller to ahci mode advanced host controller interface ahci is an interface specification that allows the storage driver to enable advanced serial ata features such as native command queuing and hot plug for more details about ahci please visit intel s website 36
- Auto bios will auto detect default value 36
- Ch master slave set pata ide to ch 0 master slave default value ch master slave set pata ide to ch 1 master slave 36
- Combined set on chip sata mode to combined you can use up to 4 hdds on the motherboard 2 for sata and the other for pata 36
- Disabled disable onboard 1st channel ide port 36
- Disabled disable this function 36
- Disabled set the onboard sata controller to ide mode default value 36
- Enabled enable onboard 1st channel ide port default value 36
- English 36
- Enhanced set on chip sata mode to enhanced the motherboard allows up to 4 hdds to use 2 for sata and the other for pata 36
- Ga 8i945gmmfy rh motherboard 36 36
- Non combined set on chip sata mode to non combined sata will be simulated to pata mode support a maximum of 2 sata devices pata devices will be ignored 36
- On chip primary pci ide 36
- On chip sata mode 36
- Pata ide set to 36
- Raid set the onboard sata controller to raid mode 36
- Sata port 0 2 set to 36
- Sata raid ahci mode 36
- This value will auto make by the setting on chip sata mode and pata ide set to if pata ide were set to ch 1 master slave this function will auto set to ch 0 master slave 36
- Azalia codec 37
- English 37
- Legacy usb storage detect 37
- Onboard h w 1394 37
- Onboard h w lan 37
- Onboard lan boot rom 37
- Onboard serial port 1 37
- Usb 2 controller 37
- Usb controller 37
- Usb keyboard support 37
- Usb mouse support 37
- Ecp mode use dma 38
- English 38
- Onboard parallel port 38
- Onboard serial port 2 38
- Parallel port mode 38
- 4 power management setup 39
- Acpi suspend type 39
- Bios setup 39 39
- Date of month alarm everyday 1 31 39
- Delay 4 sec press power button 4 sec to power off enter suspend if button is pressed less than 4 sec 39
- Disabled disable power on by ring function 39
- Disabled disable quick resume technology function default value 39
- Disabled disable this function 39
- Disabled disable this function default value 39
- Enabled enable alarm function to power on system if resume by alarm is enabled 39
- Enabled enable pme as wake up event default value 39
- Enabled enable power on by ring function default value 39
- Enabled enable quick resume technology function 39
- English 39
- Instant off press power button then power off instantly default value 39
- Pme event wake up 39
- Power on by ring 39
- Quick resume technology 39
- Resume by alarm 39
- S1 pos set acpi suspend type to s1 pos power on suspend default value 39
- S3 str set acpi suspend type to s3 str suspend to ram 39
- Soft off by pwr bttn 39
- This feature requires an atx power supply that provides at least 1a on the 5vsb lead 39
- Time hh mm ss alarm 0 23 0 59 0 59 39
- You can set resume by alarm item to enabled and key in date time to power on system 39
- Ac back function 40
- English 40
- Kb power on password 40
- Power on by keyboard 40
- Power on by mouse 40
- 5 pc health status 41
- Bios setup 41 41
- Case opened 41
- Cpu system fan fail warning 41
- Cpu system warning temperature 41
- Current cpu system fan speed rpm 41
- Current system cpu temperature 41
- Current voltage v vcore ddr18v 3 v 12v 41
- Detect cpu system fan speed status automatically 41
- Detect system cpu temperature automatically 41
- Detect system s voltage status automatically 41
- Disabled disable fan warning function default value 41
- Disabled disable this function default value 41
- Disabled don t reset case open status default value 41
- Enabled clear case open status at next boot 41
- Enabled enable fan warning function 41
- English 41
- F monitor cpu system temperature at 6 41
- F monitor cpu system temperature at 7 41
- F monitor cpu system temperature at 8 41
- F monitor cpu system temperature at 9 41
- If the case is closed case opened will show no if the case have been opened case opened will show yes if you want to reset case opened value set reset case open status to enabled and save cmos your computer will restart 41
- Reset case open status 41
- 6 frequency voltage control 42
- Cpu clock ratio 42
- Cpu smart fan control 42
- English 42
- Memory frequency mhz 42
- System memory multiplier 42
- 7 load fail safe defaults 43
- 8 load optimized defaults 43
- Bios setup 43 43
- English 43
- Fail safe defaults contain the most appropriate values of the system parameters that allow minimum system performance 43
- Selecting this field loads the factory defaults for bios and chipset features which the system automati cally detects 43
- 9 set supervisor user password 44
- English 44
- Ga 8i945gmmfy rh motherboard 44 44
- When you are prompted to enter password a message password disabled will appear to confirm the password being disabled once the password is disabled the system will boot and you can enter setup freely the bios setup program allows you to specify two separate passwords supervisor password and a user password when disabled anyone may access all bios setup program function when enabled the supervisor password is required for entering the bios setup program and having full configuration fields the user password is required to access only basic items if you select system at password check in advance bios features menu you will be prompted for the password every time the system is rebooted or any time you try to enter setup menu if you select setup at password check in advance bios features menu you will be prompted only when you try to enter setup 44
- 10 save exit setup 45
- 11 exit without saving 45
- Bios setup 45 45
- English 45
- Type y will quit the setup utility and save the user setup value to rtc cmos type n will return to setup utility 45
- Type y will quit the setup utility without saving to rtc cmos type n will return to setup utility 45
- English 46
- 1 install chipset drivers 47
- Chapter 3 install drivers 47
- English 47
- 2 software applications 48
- 3 driver cd information 48
- English 48
- 4 hardware information 49
- 5 contact us 49
- English 49
- English 50
- 1 1 easytune 5 introduction 51
- 1 unique software utilities 51
- Chapter 4 appendix 51
- English 51
- 1 2 xpress recovery2 introduction 52
- Boot from cd dvd 52
- English 52
- How to use the xpress recovery2 52
- System requirements 52
- Xpress recovery2 52
- Backup 53
- English 53
- Limitations 53
- Precautions 53
- Reboot 53
- Remove 53
- Restore 53
- The main screen of xpress recovery2 53
- 1 3 flash bios method introduction 54
- Before you begin 54
- English 54
- Method 1 q flas 54
- Part one updating bios with q flas 54
- Utility 54
- Utility on dual bios motherboards 54
- Action bar 55
- Appendix 55 55
- Contains the names of eight tasks and two item showing information about the bios rom type blocking a task and pressing enter key on your keyboard to enable execution of the task 55
- Contains the names of four actions needed to operate the q flash dual bios utility pressing the buttons mentioned on your keyboards to perform these actions 55
- Contains the names of four tasks blocking a task and pressing enter key on your keyboard to enable execu tion of the task 55
- Dual bios utility bar 55
- Dual bios utility screen 55
- English 55
- Entering the q flas 55
- Exploring the q flas 55
- Q flas 55
- Step 2 press f8 button on your keyboard and then y button to enter the dual bios q flash utility 55
- Step1 to use q flash utility you must press del in the boot screen to enter bios menu 55
- Task menu for dual bios 55
- Task menu for dual bios utility 55
- Task menu for q flas 55
- Task menu for q flash utility 55
- The q flash dual bios utility screen consists of the following key components 55
- Utility 55
- Utility title 55
- After bios file is read you ll see a confirmation dialog box asking you are you sure to update bios 56
- After pressing enter you ll then see the progress of reading the bios file from the floppy disk 56
- Bios file in the floppy disk 56
- Do not turn off power or 56
- English 56
- Ga 8i945gmmfy rh motherboard 56 56
- If you want to save the current bios for backup purpose you can begin step 1 with save main bios to floppy item 56
- In this example we only download one bios file to the floppy disk so only one bios file 8knxpu fba is listed 56
- Move to the bios file you want to flash and press enter 56
- Please confirm again you have the correct bios file for your motherboard 56
- Press arrow buttons on your keyboard to move the light bar to load main bios from floppy item in the q flash menu and press enter button later you will see a box pop up showing the bios files you previously downloaded to the floppy disk 56
- Reset your system at this stage 56
- This section tells you how to update bios using the q flash utility as described in the before you begin section above you must prepare a floppy disk having the bios file for your motherboard and insert it to your computer if you have already put the floppy disk into your system and have entered the q flash utility please follow the steps below to flash bios 56
- Using the q flas 56
- Utility 56
- After system reboots you may find the bios version on your boot screen becomes the one you flashed 57
- Appendix 57 57
- English 57
- Please do not take out the floppy disk when it begins flashing bios 57
- Press any keys to return to the q flash menu when the bios updating procedure is completed 57
- Press esc and then y button to exit the q flash utility the computer will restart automatically after you exit q flash 57
- Press y button on your keyboard after you are sure to update bios then it will begin to update bios the progress of updating bios will be displayed 57
- The bios file becomes fab after 57
- To flash the backup bios too 57
- Updating 57
- You can repeat step 1 to 4 57
- English 58
- Ga 8i945gmmfy rh motherboard 58 58
- Part two 58
- Press del to enter bios menu after system reboots when you are in bios menu move to load optimized defaults item and press enter to load bios optimized defaults normally the system redetects all devices after bios has been upgraded therefore we highly recommend reloading the bios defaults after bios has been upgraded 58
- Press y on your keyboard to load defaults 58
- Press y on your keyboard to save and exit 58
- Select save exit setup item to save the settings to cmos and exit the bios menu system will reboot after you exit the bios menu the procedure is completed 58
- This part guides users of single bios motherboards how to update bios using the q flas 58
- Updating bios with q flas 58
- Utility 58
- Utility on single bios motherboards 58
- Action bar 59
- After bios file is read you ll see a confirmation dialog box asking you are you sure to update bios 59
- Appendix 59 59
- Bios file in the floppy 59
- Contains the names of four actions needed to operate the q flash utility pressing the buttons mentioned on your keyboards to perform these actions 59
- Contains the names of three tasks blocking a task and pressing enter key on your keyboard to enable execution of the task 59
- Do not turn off power or 59
- English 59
- Exploring the q flas 59
- If you want to save the current bios for backup purpose you can begin step 1 with save bios to floppy item 59
- Move to the bios file you want to flash and press enter in this example we only download one bios file to the floppy disk so only one bios file 8ge800 f4 is listed 59
- Please confirm again you have the correct bios file for your motherboard 59
- Please do not take out the floppy disk when it begins flashing bios 59
- Press arrow buttons on your keyboard to move the light bar to update bios from floppy item in the q flash menu and press enter button later you will see a box pop up showing the bios files you previously downloaded to the floppy disk 59
- Q flas 59
- Reset your system at this stage 59
- Task menu for q flas 59
- Task menu for q flash utility 59
- The q flashbios utility screen consists of the following key components 59
- This section tells you how to update bios using the q flash utility as described in the before you begin section above you must prepare a floppy disk having the bios file for your motherboard and insert it to your computer if you have already put the floppy disk into your system and have entered the q flash utility please follow the steps below to flash bios 59
- Using the q flas 59
- Utility 59
- Utility bar 59
- Utility screen 59
- After system reboots you may find the bios version on your boot screen becomes the one you flashed 60
- At this stage 60
- Congratulation you have updated bios successfully 60
- Do not turn off power or reset your system 60
- English 60
- Ga 8i945gmmfy rh motherboard 60 60
- Press any keys to return to the q flash menu when the bios updating procedure is completed 60
- Press del to enter bios menu after system reboots and load bios fail safe defaults see how to load bios fail safe defaults please kindly refer to step 6 to 7 in part one 60
- Press esc and then y button to exit the q flash utility the computer will restart automatically after you exit q flash 60
- Press y button on your keyboard after you are sure to update bios then it will begin to update bios the progress of updating bios will be shown at the same time 60
- The bios file becomes f4 after updating 60
- English 61
- Method 2 bio 61
- Methods and steps 61
- Utility 61
- English 62
- 1 4 configuring sata hard drive s 63
- 1 install sata hard drive s in your system 63
- 1 installing sata hard drive s in your computer 63
- 2 configure sata controller mode and boot sequence in bios setup 3 configure raid set in raid bios 63
- 4 make a floppy disk containing the sata controller driver 5 install the sata controller driver during os installation 63
- Before you begin 63
- English 63
- To configure sata hard drive s follow the steps below 63
- 2 configuring sata controller mode and boot sequence in bios setup 64
- English 64
- Figure 1 64
- Ga 8i945gmmfy rh motherboard 64 64
- Step 1 turn on your computer and press del to enter bios setup during post power on self test if you want to create raid set sata raid ahci mode under the integrated peripherals menu to raid disabled by default then set on chip sata mode to manual or auto default based on your own requirements 64
- The bios setup menus described in this section may not show the exact settings for your motherboard the actual bios setup menu options you will see shall depend on the motherboard you have and the bios version 64
- You have to make sure whether the sata controller is configured correctly in system bios setup and set bios boot sequence for the sata hard drive s 64
- Appendix 65 65
- English 65
- Figure 2 65
- Figure 3 65
- Step 2 later select hard disk boot priority under the advanced bios features menu in the hard disk boot priority submenu select the model of the sata hard drive onto which you intent to install microsoft windows 2000 xp figure 2 65
- Step 3 set first boot device under the advanced bios features menu to cd rom to boot from cd rom after system restarts figure 3 65
- Step 4 save and exit bios setup 65
- 3 configuring raid set in raid bios 66
- English 66
- Enter the raid bios setup utility to configure a raid array skip this step and proceed to section 4 if you do not want to create raid 66
- Figure 4 66
- Figure 5 66
- Ga 8i945gmmfy rh motherboard 66 66
- Step 2 after you press ctrl i the create raid volume screen will appear figure 5 create raid volume if you want to create raid array select create raid volume in main menu and press enter 66
- To enter configuration utility figure 4 press ctrl i to enter the raid bios setup utility 66
- Appendix 67 67
- English 67
- Figure 6 67
- Figure 7 67
- Step 3 after entering the create volume menu screen name the disk array with 1 16 letters letters cannot be special characters under the name item when finished press enter to select a raid level figure 6 there are four raid levels raid0 raid1 select a raid level and press enter 67
- Step 4 set the stripe block size figure 7 the kb is the standard unit of stripe block size the stripe block size can be set from 4kb to 128kb after the setting press enter to set array capacity 67
- English 68
- Figure 8 68
- Figure 9 68
- Ga 8i945gmmfy rh motherboard 68 68
- Step 5 after setting all the items above select create volume and press enter figure 8 to begin the creation of the raid array 68
- Step 6 when prompted to confirm whether to create this volume press y to create or n to cancel 68
- After the creation is completed you can see detailed information about the raid array in the disk volume information section including raid mode disk block size disk name and disk capacity etc 69
- Appendix 69 69
- Delete raid volume if you want to delete a raid volume select the delete raid volume option in main menu press enter and follow on screen instructions 69
- English 69
- Figure 10 69
- Figure 11 69
- Now you can proceed to the installation of the sata driver and operating system 69
- To exit the ich7m dh raid bios utility press esc in main menu 69
- 4 making a sata driver disk 70
- English 70
- 5 installing sata controller driver during os installation 71
- English 71
- English 72
- Figure 17 72
- Figure 18 72
- Ga 8i945gmmfy rh motherboard 72 72
- If a message appears saying one or some file s cannot be found please check the floppy disk or copy the correct sata driver again from the motherboard driver cd 72
- Step 3 if setup correctly recognizes the driver in the floppy disk a controller menu similar to figure 17 below will appear use the arrow keys to select intel r 82801ghm sata raid controller mobile ich7mr dh and press enter then it will begin to load the sata driver from the floppy disk 72
- Step 4 when the screen as shown below appears press enter to continue the sata driver installation from the floppy disk the driver installation will be finished in about one minute 72
- After the sata controller driver installation is completed you should see a screen as below it indicates that you have installed the sata controller driver successfully you can proceed with the windows 2000 xp installation 73
- Appendix 73 73
- English 73
- Figure 19 73
- 1 5 2 4 6 8 channel audio function introduction 74
- English 74
- Stereo speakers connection and settings 74
- Channel audio setup 75
- English 75
- Channel audio setup 76
- English 76
- English 77
- 2 troubleshooting 78
- English 78
- English 79
- English 80
- English 81
- English 82
- English 83
- English 84
- English 85
- English 86
- Appendix 87 87
- Contact us 87
- English 87
- English 88
- Ga 8i945gmmfy rh motherboard 88 88
- Gigabyte global service system 88
- To submit a technical or non technical sales marketing question please link to http ggts gigabyte com tw then select your language to enter the system 88
Похожие устройства
- JVC XV-N5SL Инструкция по эксплуатации
- Acer Aspire 5333 Инструкция по эксплуатации
- Thermex RZL 30 Инструкция по эксплуатации
- Gigabyte GA-8IDXH Инструкция по эксплуатации
- Rover RoverMedia Aria G5 Инструкция по эксплуатации
- Acer Aspire 5334 Инструкция по эксплуатации
- Gigabyte GA-8IE2004-L Инструкция по эксплуатации
- Yamaha YPT-220 Инструкция по эксплуатации
- Ballu BSN-07HN1 Инструкция по эксплуатации
- Gigabyte GA-8IE800 Инструкция по эксплуатации
- Bosch WAA18160BY Инструкция по эксплуатации
- Thermos CanTote B Инструкция по эксплуатации
- Ballu BSN-09HN1 Инструкция по эксплуатации
- Gigabyte GA-8IE533 Инструкция по эксплуатации
- Daewoo Electronics DTF-2950R-100D Инструкция по эксплуатации
- Thermos PFlower Инструкция по эксплуатации
- Ballu BSN-12HN1 Инструкция по эксплуатации
- Gigabyte GA-8IG1000 Pro (rev. 2.x) Инструкция по эксплуатации
- Vitek VT-1760 Инструкция по эксплуатации
- Thermos 100335 Black Инструкция по эксплуатации