Tp-Link T1600G-52TS V3 [175/471] Mvr immediate

Tp-Link T1600G-52TS V3 [175/471] Mvr immediate
19.8 mvr immediate
Description
The mvr immediate command is used to enable the Fast Leave feature of
MVR for specified port. To disable the Fast Leave feature of MVR for specific
ports, please use no mvr immediate command.
Syntax
mvr immediate
no mvr immediate
Command Mode
Interface Configuration Mode (interface gigabitEthernet / interface range
gigabitEthernet)
Privilege Requirement
Only Admin, Operator and Power User level users have access to these
commands.
User Guidelines
Only receiver ports support Fast Leave. Before enabling Fast Leave for a port,
make sure there is only a single receiver device connecting to the port.
Example
Enable the Fast Leave feature of MVR for port 1/0/3:
T1600G-52TS(config)# interface gigabitEthernet 1/0/3
T1600G-52TS(config-if)#mvr immediate
19.9 mvr vlan (group)
Description
This command is used to statically add ports to an MVR group. Then the ports
can receive multicast traffic sent to the IP multicast address via the multicast
VLAN.
Syntax
mvr vlan
vlan-id
group
ip-addr
Parameter
vlan-id
—— The ID of the multicast VLAN. Valid values are from 1 to 4094.
ip-addr
—— The IP address of the multicast group.
154

Содержание

Скачать