Tp-Link T1600G-52TS V3 [284/471] Chapter 29 bandwidth control commands

Tp-Link T1600G-52TS V3 [284/471] Chapter 29 bandwidth control commands
Chapter 29 Bandwidth Control Commands
Bandwidth Control functions to control the traffic rate and traffic threshold on each port to
ensure network performance. Rate limit functions to limit the ingress/egress traffic rate on
each port. Storm Control function allows the switch to monitor broadcast packets, multicast
packets and Unknown unicast frames in the network.
29.1 storm-control rate-mode
Description
The storm-control rate-mode command is used to configure the storm
control mode of the interface. To return to the default configuration, please
use no storm-control rate-mode command.
Syntax
storm-control rate-mode { kbps | ratio | pps }
no storm-control rate-mode
Command Mode
Interface Configuration Mode (interface gigabitEthernet / interface range
gigabitEthernet / interface port-channel / interface range port-channel)
Privilege Requirement
Only Admin, Operator and Power User level users have access to these
commands.
User Guidelines
This command should be used along with the storm-control command to
enable the storm control function and specify the detailed parameters.
Example
Set the storm control mode as kbps on port 1/0/5:
T1600G-52TS(config)# interface gigabitEthernet 1/0/5
T1600G-52TS(config-if)# storm-control rate-mode kbps
29.2 storm-control
Description
The storm-control command is used to enable the broadcast, multicast, or
unknown unicast strom control function and to set threshold levels on an
263

Содержание

Скачать