Tp-Link T1600G-52TS V3 [299/471] Auto voip data priority

Tp-Link T1600G-52TS V3 [299/471] Auto voip data priority
T1600G-52TS(config)# interface gigabitEthernet 1/0/3
T1600G-52TS(config-if)# auto-voip dscp 33
31.8 auto-voip data priority
Description
The auto-voip data priority command is used to enable or disable the CoS
Override Mode on specified ports.
Syntax
auto-voip data priority { trust | untrust }
Parameter
trust——In this mode, the switch will then put the voice packets in the
corresponding TC queue according to the 802.1p priority of the packets.
untrust——In this mode, the switch will ignore the 802.1p priority in the voice
packets and put the packets in TC-5 directly.
Command Mode
Interface Configuration Mode (interface gigabitEthernet / interface range
gigabitEthernet / interface port-channel / interface range port-channel)
Example
Set the CoS Override Mode as trust for port 1/0/3:
T1600G-52TS(config)# interface gigabitEthernet 1/0/3
T1600G-52TS(config-if)# auto-voip data priority trust
31.9 show auto-voip
Description
The show auto-voip command is used to display the Auto VoIP configuration
information.
Syntax
show auto-voip [ interface ]
278

Содержание

Скачать