![Owon HDS1021M-N Инструкция по эксплуатации(ENG) онлайн [11/83] 394720](/img/pdf.png)
Owon HDS1021M-N Инструкция по эксплуатации(ENG) онлайн [11/83] 394720
![Owon HDS2061M-N Инструкция по эксплуатации(ENG) онлайн [11/83] 394721](/views2/1472823/page11/bgb.png)
2-Safety information
5
● Always connect the power adapter first to the AC outlet before connecting it to the
Oscilloscope & Multimeter.
● Do not apply voltages that differ more than 400 V from earth ground to any input when
measuring in a CAT
Ⅱ
environment.
● Do not apply voltages that differ more than 400 V from each other to the isolated inputs
when measuring in a CAT
Ⅱ
environment.
● Do not apply input voltages above the rating of the instrument Use caution when using
1:1 test leads because the probe tip voltage will be directly transmitted to the
Oscilloscope & Multimeter.
● Do not use exposed metal BNC or banana plug connectors.
● Do not insert metal objects into connectors.
● Always use the Oscilloscope & Multimeter only in the manner specified.
● Voltage ratings that are mentioned in the warning are giver as limits for "working
voltage". The represent V ac rms (50-60Hz) for AC sine wave applications and as V dc
for DC applications. Overvoltage Category
Ⅱ
refers to local level , which is applicable
for appliances and portable equipment .
Only qualified technical personnel are permitted to perform maintenance.
Pay attention to the nominal values of all terminals: To avoid fire or electric shock, please keep
a watchful eye on all nominal values and marks specified for this product. Before any connection
performed on this product, carefully read the user's manual of the product for further information
of nominal values.
No operation is allowed without the instrument cover plate: If the cover plate or panel has
been removed, do not perform any operation on this product.
No touch is allowed on bare conductors: When the product is powered on, do not touch any bare
joints or parts of the scope meter.
Operation is prohibited in case of any undetermined failure: When in doubt any damage on
this product, consult the qualified personnel for checking on it.
Keep ventilation in good condition: Refer to the user manual for detail installation instructions
in order to fix this product correctly and provide it with good ventilation conditions.
No operation is allowed under a humid environment.
No operation is allowed under an explosive environment.
Keep clean and dry on the product surface.
Using the Oscilloscope & Multimeter in a manner not specified may impair the protection
provided by the equipment.
Содержание
- Oct 2017 edition v1 2
- General warranty 3
- Declaration of conformity 1 4
- General characteristics 6 4
- Input connections 8 4
- Performing the general inspection 7 4
- Safety information 3 4
- Table of contents 4
- Using the oscilloscope 12 4
- Advanced function of oscilloscope 40 5
- Using the multimeter 29 5
- Appendix 72 6
- Trouble shooting 71 6
- Declaration of conformity 7
- Package contents 8
- See the picture below this picture is only for your reference if any discrepancy found between certain picture and product please look the actual product 8
- General safety information 9
- Safety information 9
- Safety symbols 9
- Safety symbols and terms 9
- Safety terms 9
- Oscilloscope 10
- Pc electrical outlet probe 10
- General characteristics 12
- Multimeter 12
- Oscilloscope 12
- Check whether there is any damage on it due to transportation 13
- Make a check on accessories 13
- Make a check on the complete instrument 13
- Performing the general inspection 13
- Input connections 14
- The output terminal of 1 khz 5 v square wave test signal 14
- Front panel and keys overview 15
- The connection of 1 khz 5 v square wave test signal 15
- About this chapter 18
- Oscilloscope operation window 18
- Powering up the oscilloscope 18
- Using the oscilloscope 18
- And trigger position 20
- Manually setting the vertical system horizontal system 20
- Manually setting the vertical system horizontal system and trigger position 20
- Menu description 20
- Setting the vertical system 20
- Setting the horizontal system and trigger position 21
- Vertical zer 21
- Recall factory settings 22
- Displaying an unknown signal with auto set 23
- Input connections 23
- And trigger level position 24
- Automatic measurements 24
- Automatic zero returning of trigger horizontal position 24
- Automatic zero returning of trigger horizontal position and trigger level position 24
- Freezing the screen 25
- Using average for smoothing waveforms 25
- Using persistence to display waveforms 26
- Using peak detection to display glitches 27
- Selecting ac coupling 28
- Reversing the polarity of the displayed waveform 29
- Use usb mass storage device to save waveform data 29
- Usb disk requirements 30
- Use system provided function to format the usb disk 30
- Use minitool partition wizard to format 32
- Format the usb disk successfully 34
- Formatting process 34
- About this chapter 35
- Making meter connections 35
- Multimeter operation window 35
- Using the multimeter 35
- Making multimeter measurements 36
- Measuring resistance values 36
- Measuring diode 37
- Measuring capacitance 38
- On off test 38
- Measuring dc voltage 39
- Measuring ac voltage 40
- Measuring dc current 41
- Measuring ac current 42
- Freezing the readings 43
- Taking a relative measurement 44
- Selecting automatic manualrange adjustment 45
- About this chapter 46
- Advanced function of oscilloscope 46
- Setting the vertical channel 46
- Setting the channel coupling 47
- Open and close settings on channel 48
- Setting the probe attenuation 48
- Setting of inverted waveform 49
- Setting the trigger system 49
- Triggering control 49
- Edge trigger 50
- Video trigger 50
- Designe 51
- Display setting 53
- Display style 53
- Setting the acquiring mode 53
- Cymometer 54
- Persistence 54
- Cymometer 55
- Waveform saving setups 55
- Waveform saving setups in normal mode 55
- Waveform saving setups in fft mode 56
- Auto calibration 57
- Function setting menu 57
- Fall tim 58
- Fall time 58
- Making automatic measurements 58
- Overshoo 58
- Overshoot 58
- Preshoo 58
- Preshoot 58
- Rise tim 58
- Rise time 58
- Display the difference of measured value between the two channels 59
- Display the relating measured value of cursor 1 59
- Display the relating measured value of cursor 2 59
- Setting the cursor measurement in normal mode 59
- Setting the cursor measurements 59
- Setting the cursor measurement in fft mode 62
- Adjust both vertical and horizontal scales according to 63
- Autoscale 63
- Display multi cycles in waveform 63
- Display only one or two cycles in waveform 63
- Input signal 63
- Only adjust horizontal scale according to input signal 63
- Only adjust vertical scale according to input signal 63
- Turn off 63
- Turn on 63
- Record 64
- Using fft 67
- Channel settin 68
- Fig 7 hanning window 72
- Window 72
- System state menu 73
- Real time clock 74
- Setting of time base mode 74
- Zone windo 75
- Zone window 75
- Data transmission 76
- The measured voltage amplitude value is 10 times larger or smaller than the real value under the oscilloscope mode 77
- The measurement type displays err when you switch to the multimeter mode 77
- The oscilloscope does not power up 77
- The oscilloscope stops working only after operating for several seconds 77
- The waveform is displayed on the screen but is not stable under the oscilloscope mode 77
- There is no display on the screen when you push down run stop key under the oscilloscope mode 77
- Trouble shooting 77
- When select the average sampling in the sampling mode or select a longer display time in the display mode under the oscilloscope the display speed is slow 77
- Appendix 78
- Appendix a specifications 78
- Oscilloscope 78
- Hz to full bandwidth 80
- General specifications 82
- Appendix b maintenance and cleaning 83
- Maintenance 83
- Replacing the lithium battery unit 83
- Storage of oscilloscope 83
Похожие устройства
- Owon HDS2061M-N Инструкция по эксплуатации(ENG)
- Owon HDS3101M-N Инструкция по эксплуатации(ENG)
- Owon XDS3062A Инструкция по эксплуатации(ENG)
- Owon XDS3102A Инструкция по эксплуатации(ENG)
- Owon XDS3102 Инструкция по эксплуатации(ENG)
- Owon XDS3202A Инструкция по эксплуатации(ENG)
- Owon XDS3202 Инструкция по эксплуатации(ENG)
- Owon XDS3302 Инструкция по эксплуатации(ENG)
- Owon AG051 Инструкция по эксплуатации(ENG)
- Owon AG051F Инструкция по эксплуатации(ENG)
- Owon AG1011 Инструкция по эксплуатации(ENG)
- Owon AG1011F Инструкция по эксплуатации(ENG)
- Owon XSA1015 Инструкция по эксплуатации(ENG)
- Owon XSA1015-TG Инструкция по эксплуатации(ENG)
- Owon XSA1036 Инструкция по эксплуатации(ENG)
- Owon XSA1036-TG Инструкция по эксплуатации(ENG)
- Owon XDS3064E Инструкция по эксплуатации(ENG)
- Owon XDS3064AE Инструкция по эксплуатации(ENG)
- Owon XDS3104E Инструкция по эксплуатации(ENG)
- Owon XDS3104AE Инструкция по эксплуатации(ENG)
Скачать
Случайные обсуждения