![Gigabyte GA-8I865PE775-G-RH (rev. 3.0) [45/72] English](/img/pdf.png)
Gigabyte GA-8I865PE775-G-RH (rev. 3.0) [45/72] English
![Gigabyte GA-8I865PE775-G-RH (rev. 3.0) [45/72] English](/views2/1048043/page45/bg2d.png)
BIOS Setup- 45 -
English
AGP/PCI Fixed
This item will be available when "CPU Host Clock Control" is set to Enabled.
Serial ATA device is very sensitive to SRC clock. SRC over clock may make Serial ATA device
function can't work properly.
Adjust AGP/PCI clock asychrohous with CPU.
Memory Frequency For
The adjustable range will vary based on the CPU FSB. Default value: Auto (set memory
frequency by DRAM SPD data). Wrong frequency settings may cause system unable to boot.
Clear CMOS to overcome wrong frequency issue.
Memory Frequency (Mhz)
The values depend on "CPU Host Frequency(Mhz) and Memory Frequency For" item.
AGP/PCI Frequency (Mhz)
The values depend on AGP/PCI/SRC Fixed.
DIMM OverVoltage Control
Please note that by overclocking your system through the increase of the DIMM voltage, damage
to the memory may occur.
Normal Supply DIMM voltage as DIMM reauires. (Default value)
+0.1V ~ +0.6V Increase DIMM voltage by +0.1V to +0.6V.
Incorrect using it may cause your system broken. For power End-User use only!
AGP OverVoltage Control
Normal Supply AGP voltage as AGP reauires. (Default value)
+0.1V ~ +0.3V Increase AGP voltage by +0.1V to +0.3V.
Increase AGP voltage may get stable for Over_Clock. But it may damage to AGP Card when
enable this feature.
CPU OverVoltage Control
Please note that by overclocking your system through the increase of the CPU voltage, damage
to the memory may occur.
Normal Supply CPU voltage as CPU reauires. (Default value)
1.8V Set CPU OverVoltage Control to 1.8V.
2.0V Set CPU OverVoltage Control to 2.0V.
Incorrect using it may cause your system broken. For power End-User use only!
FSB OverVoltage Control
Please note that by overclocking your system through the increase of the FSB voltage, damage
to the memory may occur.
Normal Supply FSB voltage as FSB reauires. (Default value)
+0.1V ~ +0.3V Increase FSB voltage by +0.1V to +0.3V.
Incorrect using it may cause your system broken. For power End-User use only!
CPU Voltage Control
Supports adjustable CPU Vcore from 0.8375V to 1.6000V. (Default value: Normal)
Normal CPU Vcore
Display your CPU Vcore Voltage.
Содержание
- D inte 1
- Duo inte 1
- Extreme dual core core 1
- Ga 8i865pe775 g rh 1
- Lga775 processor motherboard 1
- Pentiu 1
- User s manual 1
- Copyright 3
- Notice 3
- Product manual classification 3
- Block diagram 8 4
- Chapter 1 hardware installation 9 4
- Chapter 2 bios setup 29 4
- Item checklist 6 4
- Optional accessories 6 ga 8i865pe775 g rh rev 3 motherboard layout 7 4
- Table of contents 4
- Chapter 3 drivers installation 49 5
- Chapter 4 appendix 53 5
- Item checklist 6
- Optional accessories 6
- Ga 8i865pe775 g rh 7
- Ga 8i865pe775 g rh rev 3 motherboard layout 7
- Block diagram 8
- 1 considerations prior to installation 9
- Chapter 1 hardware installation 9
- English 9
- Installation notices 9
- Instances of non warranty 9
- Preparing your computer 9
- 2 feature summary 10
- English 10
- English 11
- 3 1 installation of the cpu 12
- 3 installation of the cpu and cpu cooler 12
- English 12
- 3 2 installation of the cooler 13
- English 13
- 4 installation of memory 14
- English 14
- Dual channel ddr 15
- English 15
- 5 installation of expansion cards 16
- English 16
- 6 i o back panel introduction 17
- English 17
- Lan port 17
- Line in 17
- Line out 17
- Mic in 17
- Parallel port 17
- Ps 2 keyboard and ps 2 mouse connector 17
- Serial port 17
- Usb port 17
- 7 connectors introduction 18
- English 18
- 2 atx_12v atx power connector 19
- English 19
- Hardware installation 19 19
- With the use of the power connector the power supply can supply enough stable power to all the components on the motherboard before connecting the power connector please make sure that all components and devices are properly installed align the power connector with its proper location on the motherboard and connect tightly the atx_12v power connector mainly supplies power to the cpu if the atx_12v power connector is not connected the system will not start caution please use a power supply that is able to handle the system voltage requirements it is recommended that a power supply that can withstand high power consumption be used 300w or greater if a power supply is used that does not provide the required power the result can lead to an unstable system or a system that is unable to start if you use a 24 pin atx power supply please remove the small cover on the power connector on the motherboard before plugging in the power cord otherwise please do not remove it 19
- 4 cpu_fan sys_fan cooler fan power connector 20
- An ide device connects to the computer via an ide connector one ide connector can connect to one ide cable and the single ide cable can then connect to two ide devices hard drive or optical drive if you wish to connect two ide devices please set the jumper on one ide device as master and the other as slave for information on settings please refer to the instructions located on the ide device before attaching the ide cable please take note of the foolproof groove in the ide connector 20
- English 20
- Ga 8i865pe775 g rh rev 3 motherboard 20 20
- Ide1 ide2 ide connector 20
- The cooler fan power connector supplies a 12v power voltage via a 3 pin 4 pin only for cpu_fan power connector and possesses a foolproof connection design most coolers are designed with color coded power connector wires a red power connector wire indicates a positive connection and requires a 12v power voltage the black connector wire is the ground wire gnd please remember to connect the cpu system fan cable to the cpu_fan sys_fan connector to prevent the cpu system from overheating and failure 20
- English 21
- Fdd fdd connector 21
- Hardware installation 21 21
- Sata0 sata1 serial ata connector 21
- Serial ata can provide up to 150 mb s transfer rate please refer to the bios setting for the serial ata and install the proper driver in order to work properly 21
- The fdd connector is used to connect the fdd cable while the other end of the cable connects to the fdd drive the types of fdd drives supported are 360 kb 720 kb 1 mb 1 4 mb and 2 8 mb before attaching the fdd cable please take note of the foolproof groove in the fdd connector 21
- English 22
- F_panel front panel connector 22
- Ga 8i865pe775 g rh rev 3 motherboard 22 22
- Please connect the power led pc speaker reset switch and power switch etc of your chassis front panel to the f_panel connector according to the pin assignments below 22
- English 23
- F_audio front audio panel connector 23
- Hardware installation 23 23
- If you want to use front audio connector you must remove 5 6 9 10 jumper in order to utilize the front audio header your chassis must have front audio connector also please make sure the pin assigments on the cable are the same as the pin assigments on the mb header to find out if the chassis you are buying support front audio connector please contact your dealer please note you can have the alternative of using front audio connector or of using rear audio connector to play sound 23
- Pwr_led 23
- The pwr_led connector is connected with the system power indicator to indicate whether the system is on off it will blink when the system enters suspend mode s1 23
- Aux_in aux in connector 24
- Cd_in cd in connector 24
- Connect cd rom or dvd rom audio out to the connector 24
- Connect other device such as pci tv tunner audio out to the connector 24
- English 24
- Ga 8i865pe775 g rh rev 3 motherboard 24 24
- English 25
- Hardware installation 25 25
- Please contact your nearest dealer for optional 6 channel audio combo kit 25
- Spdif_o s pdif out connector 25
- Sur_cen 25
- The s pdif output is capable of providing digital audio to external speakers or compressed ac3 data to an external dolby digital decoder use this feature only when your stereo system has digital input function be careful with the polarity of the s pdifo connector check the pin assign ment carefully while you connect the s pdifo cable incorrect connection between the cable and connector will make the device unable to work or even damage it for optional s pdifo cable please contact your local dealer 25
- Be careful with the polarity of the front usb connector check the pin assignment carefully while you connect the front usb cable incorrect connection between the cable and connector will make the device unable to work or even damage it for optional front usb cable please contact your local dealer 26
- Ci chassis intrusion case open 26
- English 26
- F_usb1 f_usb2 front usb connectors 26
- Ga 8i865pe775 g rh rev 3 motherboard 26 26
- This 2 pin connector allows your system to detect if the chassis cover is removed you can check the case opened status in bios setup 26
- Battery 27
- Clr_cmos clear cmos 27
- English 27
- Hardware installation 27 27
- Short the two pins default doesn t include the jumper to avoid improper use of this header 27
- You may clear the cmos data to its default values by this header to clear cmos temporarily 27
- English 28
- Chapter 2 bios setup 29
- Control keys 29
- English 29
- Main menu 29
- Status page setup menu option page setup menu 29
- Boot menu 30
- English 30
- Ga 8i865pe775 g rh rev 3 motherboard 30 30
- If you don t find the settings you want press ctrl f1 to access advanced options 2 select the load optimized defaults item in the bios setup when somehow the system is not stable as usual this action makes the system reset to the default settings for stability 3 the bios setup menus described in this chapter are for reference only and may differ from the exact settings for your motherboard 30
- Select boot sequence for onboard or add on cards device 30
- The main menu for example bios ver e13 30
- To accept or enter the sub menu 30
- To exit this menu 30
- English 31
- 1 standard cmos features 32
- Access mode use this to set the access mode for the hard drive the four options are chs lba large auto default auto 32
- Capacity capacity of currectly installed hard drive 32
- Day the day from 1 to 31 or the maximum allowed in the month 32
- English 32
- Ga 8i865pe775 g rh rev 3 motherboard 32 32
- Ide channel 0 master slave ide channel 1 master slave 32
- Ide channel 2 3 master 32
- Ide hdd auto detection press enter to select this option for automatic device detection ide channel 0 master slave ide channel 1 master slave ide devices setup you can use one of three methods auto allows bios to automatically detect ide devices during post default value none select this if no ide devices are used and the system will skip the automatic detection step and allow for faster system start up manual user can manually input the correct settings 32
- Ide sata hdd auto detection press enter to select this option for automatic device detection extended ide sata drive you can use one of the two methods auto allows bios to automatically detect ide sata devices during post default none select this if no ide sata devices are used and the system will skip the automatic detection step and allow for faster system start up 32
- Month the month jan through dec 32
- The time is calculated base on the 24 hour military time clock for example 1 p m is 13 00 00 32
- Week the week from sun to sat determined by the bios and is display only 32
- Year the year from 1999 through 2098 32
- Base memory 33
- Drive a 33
- English 33
- Extended memory 33
- Floppy 3 mode support for japan area 33
- Halt on 33
- Memory 33
- 2 advanced bios features 34
- Cdrom select your boot device priority by cdrom 34
- Disabled disable this function 34
- English 34
- First second third boot device 34
- Floppy select your boot device priority by floppy 34
- Ga 8i865pe775 g rh rev 3 motherboard 34 34
- Hard disk boot priority 34
- Hard disk select your boot device priority by hard disk 34
- Lan select your boot device priority by lan 34
- Ls120 select your boot device priority by ls120 34
- Note this item will show up when you install a processor which supports this function 34
- Password check 34
- Setup the system will boot but access to setup will be denied if the correct password is not entered at the prompt default value 34
- System the system can not boot and can not access to setup page will be denied if the correct password is not entered at the prompt 34
- To exit this menu 34
- Usb cdrom select your boot device priority by usb cdrom 34
- Usb fdd select your boot device priority by usb fdd 34
- Usb hdd select your boot device priority by usb hdd 34
- Usb zip select your boot device priority by usb zip 34
- Zip select your boot device priority by zip 34
- Cpu eist functio 35
- Cpu enhanced halt c1e 35
- Cpu hyper threading 35
- Cpu thermal monitor 2 tm2 35
- English 35
- Limit cpuid max to 3 35
- No execute memory protec 35
- Virtualization technolog 35
- 3 integrated peripherals 36
- Auto when there is no device to be plugged in ide1 or ide2 sata controller will remap to ide controller default value 36
- Disabled disable onboard 1st channel ide port 36
- Disabled disable onboard 2nd channel ide port 36
- Disabled disable onboard seria ata function 36
- Enabled enable onboard 1st channel ide port default value 36
- Enabled enable onboard 2nd channel ide port default value 36
- English 36
- Ga 8i865pe775 g rh rev 3 motherboard 36 36
- Ide pri master set sata controller to compatible mode this mode will remap sata port 0 to ide primary master 36
- Ide pri slave set sata controller to compatible mode this mode will remap sata port 0 to ide primary slave 36
- Ide sec master set sata controller to compatible mode this mode will remap sata port 0 to ide secondary master 36
- Ide sec slave set sata controller to compatible mode this mode will remap sata port 0 to ide secondary slave 36
- Manual set sata mode manually from sata port0 configure as item 36
- On chip primary pci ide 36
- On chip sata 36
- On chip secondary pci ide 36
- Sata port0 configure as 36
- Sata port0 set sata controller to native mode serial ata mode sata port 0 this mode is only supported by windows xp or later default value 36
- Sata port1 set sata controller to native mode serial ata mode sata port 1 this mode is only supported by windows xp or later 36
- Ac97 audio 37
- English 37
- Legacy usb storage detect 37
- Onboard h w lan 37
- Onboard lan boot rom 37
- Onboard serial port 1 37
- Sata port1 configure as 37
- Usb 2 controller 37
- Usb controller 37
- Usb keyboard support 37
- Usb mouse support 37
- Ecp mode use dma 38
- English 38
- Onboard parallel port 38
- Onboard serial port 2 38
- Parallel port mode 38
- 4 power management setup 39
- Acpi suspend type 39
- An incoming call via modem can awake the system from any suspend state or an input signal comes from the other client server on the lan can awake the system from any suspend state 39
- Bios setup 39 39
- Blinking in standby mode s1 poer led will blink default value 39
- Delay 4 sec press power button 4 sec to power off enter suspend if button is pressed less than 4 seconds 39
- Disabled disable modem ring on wake on lan function 39
- Disabled disable this function 39
- Dual off in standby mode s1 a if use single color led power led will turn off b if use dual color led power led will turn to another color 39
- Enabled enable modem ring on wake on lan function default value 39
- Enabled enable pme as wake up event default value 39
- English 39
- Instant off press power button then power off instantly default value 39
- Modemringon wakeonlan 39
- Off by power button 39
- Pme event wake up 39
- Power led in s1 state 39
- S1 pos set acpi suspend type to s1 pos power on suspend default value 39
- S3 str set acpi suspend type to s3 str suspend to ram 39
- This feature requires an atx power supply that provides at least 1a on the 5vsb lead 39
- Ac back function 40
- English 40
- Kb power on password 40
- Power on by keyboard 40
- Power on by mouse 40
- Resume by alarm 40
- 4 5 7 9 10 11 12 14 15 set irq 3 4 5 7 9 10 11 12 14 15 to pci1 pci5 41
- 4 5 7 9 10 11 12 14 15 set irq 3 4 5 7 9 10 11 12 14 15 to pci2 41
- 4 5 7 9 10 11 12 14 15 set irq 3 4 5 7 9 10 11 12 14 15 to pci3 41
- 4 5 7 9 10 11 12 14 15 set irq 3 4 5 7 9 10 11 12 14 15 to pci4 41
- 5 pnp pci configurations 41
- Auto auto assign irq to pci1 pci5 default value 41
- Auto auto assign irq to pci2 default value 41
- Auto auto assign irq to pci3 default value 41
- Auto auto assign irq to pci4 default value 41
- Bios setup 41 41
- English 41
- Pci1 pci5 irq assignment 41
- Pci2 irq assignment 41
- Pci3 irq assignment 41
- Pci4 irq assignment 41
- 6 pc health status 42
- Case opened 42
- Cpu system fan fail warning 42
- Cpu warning temperature 42
- Current cpu system fan speed rpm 42
- Current cpu temperature 42
- Current voltage v vcore ddr25v 3 v 12v 42
- Detect cpu system fan speed status automatically 42
- Detect cpu temperature automatically 42
- Detect system s voltage status automatically 42
- Disabled disable the fan fail warning function default value 42
- Disabled disable this function default value 42
- Disabled don t reset case open status default value 42
- Enabled clear case open status at next boot 42
- Enabled enable the fan fail warning function 42
- English 42
- F monitor cpu temperature at 6 42
- F monitor cpu temperature at 7 42
- F monitor cpu temperature at 8 42
- F monitor cpu temperature at 9 42
- Ga 8i865pe775 g rh rev 3 motherboard 42 42
- If the case is closed case opened will show no if the case have been opened case opened will show yes if you want to reset case opened value set reset case open status to enabled and save cmos your computer will restart 42
- Reset case open status 42
- Cpu smart fan control 43
- Cpu smart fan mode 43
- English 43
- 7 mb intelligent tweaker m i t 44
- Cpu 1066 mhz fsb 44
- Cpu 1066 mhz fsb default value 44
- Cpu clock ratio 44
- Cpu host clock control 44
- Cpu host frequency mhz 44
- Cpus with 1066 mhz fsb through overclocking to enable this feature you must install ddr 400 memory module s and a core 44
- Disabled disable cpu host clock control default value 44
- Disabled disable the use of core 44
- Enable use of core 44
- Enabled enable cpu host clock control 44
- Enabled enable the use of core 44
- English 44
- Ga 8i865pe775 g rh rev 3 motherboard 44 44
- Incorrectly using these features may result in system instability or corruption doing a overclock or overvoltage on cpu chipsets and memory modules may result in damages or shortened life expectancy to these components please be aware that the m i t menu items are for power users only 44
- Mhz 355 mhz set cpu host frequency from 100 mhz to 355 mhz if you use a 533 mhz fsb processor set cpu host frequency to 133 mhz if you use an 800 mhz fsb processor set cpu host frequency to 200 mhz incorrect using it may cause your system broken for power end user use only 44
- Note this item will show up when you install a processor which supports this function 44
- O c fsb1066 core 2 cpu 44
- Please note that if your system is overclocked and cannot restart please wait 20secs for automatic system restart or clear the cmos setup data and perform a safe restart 44
- This setup option will automatically assign by cpu detection the option will display locked and read only if the cpu ratio is not changeable 44
- Agp overvoltage control 45
- Agp pci fixed 45
- Agp pci frequency mhz 45
- Cpu overvoltage control 45
- Cpu voltage control 45
- Dimm overvoltage control 45
- English 45
- Fsb overvoltage control 45
- Memory frequency for 45
- Memory frequency mhz 45
- Normal cpu vcore 45
- 8 load fail safe defaults 46
- 9 load optimized defaults 46
- English 46
- Fail safe defaults contain the most appropriate values of the system parameters that allow minimum system performance 46
- Ga 8i865pe775 g rh rev 3 motherboard 46 46
- Selecting this field loads the factory defaults for bios and chipset features which the system automati cally detects 46
- 10 set supervisor user password 47
- Bios setup 47 47
- English 47
- When you are prompted to enter password a message password disabled will appear to confirm the password being disabled once the password is disabled the system will boot and you can enter setup freely the bios setup program allows you to specify two separate passwords supervisor password and a user password when disabled anyone may access all bios setup program function when enabled the supervisor password is required for entering the bios setup program and having full configuration fields the user password is required to access only basic items if you select system at password check in advance bios features menu you will be prompted for the password every time the system is rebooted or any time you try to enter setup menu if you select setup at password check in advance bios features menu you will be prompted only when you try to enter setup 47
- 11 save exit setup 48
- 12 exit without saving 48
- English 48
- Ga 8i865pe775 g rh rev 3 motherboard 48 48
- Type y will quit the setup utility and save the user setup value to rtc cmos type n will return to setup utility 48
- Type y will quit the setup utility without saving to rtc cmos type n will return to setup utility 48
- 1 install chipset drivers 49
- Chapter 3drivers installation 49
- English 49
- 2 software applications 50
- 3 driver cd information 50
- English 50
- 4 hardware information 51
- 5 contact us 51
- English 51
- English 52
- 1 1 easytune 5 introduction 53
- 1 unique software utilities 53
- Chapter 4 appendix 53
- English 53
- 1 2 xpress recovery2 introduction 54
- Boot from cd dvd 54
- English 54
- How to use the xpress recovery2 54
- System requirements 54
- Xpress recovery2 54
- Backup 55
- English 55
- Limitations 55
- Precautions 55
- Reboot 55
- Remove 55
- Restore 55
- The main screen of xpress recovery2 55
- 1 3 flash bios method introduction 56
- Before use 56
- English 56
- Method 1 q flash 56
- Qflash 56
- Updating the bios 56
- Appendix 57 57
- C select the bios file and press enter 57
- Do not turn off or restart the system when the system is reading updating the bios 2 do not remove the floppy disk or hard drive usb drive when the system is updating the bios 57
- English 57
- Make sure again the bios file matches your motherboard model 57
- Press y to load bios defaults 57
- Step 2 the process of system reading the bios file from the floppy disk is displayed on the screen when the message are you sure to update bios appears press enter the bios update will begin and the current process will be displayed 57
- Step 3 when the update process is complete press any key to return to the q flash main menu 57
- Step 4 press esc and then delete to exit q flash and the system will restart as the system reboots you will see the new bios version during post 57
- Step 5 as the system reboots press delete to enter bios setup select load optimized de faults and press enter to load bios defaults system will re detect all peripherals devices after bios update so we recommend that you reload bios defaults 57
- Step 6 select save exit setup and then press y to save settings to cmos and exit bios setup when the system restarts the whole update process is complete 57
- English 58
- Method 2 bio 58
- Methods and steps 58
- Utility 58
- English 59
- 1 4 2 4 6 channel audio function introduction 60
- Channel audio setup 60
- English 60
- Channel analog audio output mode 61
- English 61
- Basic 6 channel analog audio output mode 62
- English 62
- Advanced 6 channel analog audio output mode 63
- English 63
- Using 6 channel audio combo kit optional device 63
- Basic advanced 6 channel analog audio output mode notes 64
- English 64
- English 65
- S pdif output device optional device 65
- 2 troubleshooting 66
- English 66
- English 67
- English 68
- English 69
- Contact us 70
- English 70
- Ga 8i865pe775 g rh rev 3 motherboard 70 70
- Appendix 71 71
- English 71
- Gigabyte global service system 71
- To submit a technical or non technical sales marketing question please link to http ggts gigabyte com tw then select your language to enter the system 71
- English 72
Похожие устройства
- Neff K6614X6 Инструкция по эксплуатации
- HTC Desire SV Инструкция по эксплуатации
- Ballu Optimal 500 Инструкция по эксплуатации
- Gigabyte GA-8I865PE775-G-RH (rev. 2.0) Инструкция по эксплуатации
- Hyundai H-LCDVD711 Инструкция по эксплуатации
- HTC One Silver Инструкция по эксплуатации
- Ballu OH-04 /11 секций Инструкция по эксплуатации
- Gigabyte GA-8I865GVMK-775 (rev. 1.1) Инструкция по эксплуатации
- Novex NFP-2006 Инструкция по эксплуатации
- HTC One Black Инструкция по эксплуатации
- Ballu OH-09 /9 секций Инструкция по эксплуатации
- Gigabyte GA-8I865GVMK-775 (rev. 1.0) Инструкция по эксплуатации
- HTC One Mini Silver Инструкция по эксплуатации
- Yamaha PSR-450 Инструкция по эксплуатации
- Ballu OH-09 /11 секций Инструкция по эксплуатации
- Gigabyte GA-8I865GVMF-775 Инструкция по эксплуатации
- HTC Desire C Black Инструкция по эксплуатации
- Beko WMD 25080 R Инструкция по эксплуатации
- Ballu OH-39 /9 секций Инструкция по эксплуатации
- Gigabyte GA-8I865GVM-775 Инструкция по эксплуатации