Home
Главная
Crate
V3112T
Инструкция по эксплуатации Страница: 4

Crate V3112T [4/12] V3112 guitar amplifier

Crate V3112T [4/12] V3112 guitar amplifier

4

1 2 3 6 94 5 7 8 10 11 12 13 14

The Front Panel:

1. Input: Connect your instrument here by

means of a shielded signal cable.

2. Clean Volume: Use this control to adjust

the output level of the Clean Channel.

3. Clean/Overdrive: This switch, when de-

pressed, selects the Overdrive Channel.

When this switch is in the out position, the

Clean Channel is selected.

4. Overdrive Gain: Use this control to

adjust the gain of the Overdrive Channel.

With the control towards the counter clock-

wise position, the gain is low and very little

distortion is present. As you rotate the con-

trol clockwise the gain increases, produc-

ing more overdrive distortion and a higher

output volume level.

5. Treble: Use this control to adjust the out-

put level of the high frequencies. This con-

trol provides 12dB of cut or boost at 6kHz.

6. Boost: This switch, when depressed,

increases the output by 10dB at 900Hz,

giving the middle frequencies more punch.

7. Mid: Use this control to adjust the output

level of the middle frequencies. This control

provides 10dB of cut or boost at 1kHz.

8. Bass: Use this control to adjust the out-

put level of the low frequencies. This con-

trol provides 8dB of cut or boost at 150Hz.

9. Presence: This switch, when

depressed, increases the output level of

the high frequencies by 8dB at 10kHz, giv-

ing a more “glassy” sound to the amplifier.

This helps the output of the amplifier cut

through “acoustically dead” rooms.

10. Overdrive Level: Use this control to

adjust the output level of the Overdrive

Channel.

11. Reverb: Use this control to adjust the

amount of reverberation applied to the sig-

nal. With the control fully counter clockwise

no reverb is applied. As you rotate the con-

trol clockwise the amount of reverb increas-

es.

12. Lamp: This lamp illuminates when the

amplifier is turned on.

13. On/Standby: Use this switch to acti-

vate the amplifier. The On/Off switch (#14)

should be turned on first. Allow 20 seconds

for the amplifier to warm up before turning

the Standby switch on.

14. On/Off: Use this switch to turn the

amplifier on and off. This switch should be

turned on at least 20 seconds before turn-

ing the Standby switch (#13) on.

V3112 Guitar Amplifier

Содержание

Похожие устройства