Bosch TDS6580 — инструкция по удалению накипи из устройства для глажки [22/106]

Превью страниц Страница 22 / 106

BOSCH

ENGLISH

* Model dependent

Descaling the boiler

1 Take special care to ensure that the appliance is cold

and unplugged.

2 Empty the water tank.

3 Remove the iron from the pad (13).

4 Unscrew and remove the boiler cap (9) and take it out.

Empty the boiler completely.

5 Fill the boiler with approximately 300 ml of tap water.

Close the boiler cap and shake the base unit for a few

moments. Then, empty it completely.

Important: To obtain the best result, we recommend

that this operation be performed twice.

Before re-closing, make sure no water remains in the

boiler.

6 If your appliance is equipped with scale collector

(9*), it must be washed (see the “Descaling the scale

collector” section).

7 Replace and tighten up the cap.

Descaling the limescale collector *

1 Place the limescale collector (9*) under the water tap.

2 Wash it up until limescale residues are removed.

Descaling the iron

1 Fill the tank (10) with tap water.

2 Plug in the mains cable (7) and press the button (2) to

switch the appliance on.

3 Press the descaling button (3) for 2 seconds. Its

indicator light will remain permanently lit.

300 ml

2”