Zkteco TS5000A Инструкция по эксплуатации(ENG) онлайн [8/10] 409372

Menu Operation 7

5. Open duration

Press the "UP" and "DOWN" button to adjust the time. Press "OK" button to save.

After the barrier is open, it will automatically close if no one passes. The default setting time is 5

seconds.

6. Turning angle

Press the UP and DOWN button to set turning angle. Press OK button to save. The turning angle can

be adjusted from 1 to 30 degree. The default turning angle is 10 degree.

7. Push angle

Press the UP and DOWN button to set push angle. Press OK button to save. The push angel can be

adjusted from 1 to 30 degree. The default push angle is 5 degree.

8. Clutch mode

① Normal open

② Normal Close

9. Max motor running time

Press the "UP" and "DOWN" button to adjust the time. Press "OK" button to save.

It is designed to prevent the motor idling when the control panel is break down for external detection and

other reasons causing no signal. The default setting for the maximum motor running time is 3 seconds.

10. Device number

Press the "UP" and "DOWN" button to adjust the time. Press "OK" button to save.

When many machines are put together, different device number can be used to distinguish, the default

number is 1.

11. Device information

The basic information of the display panel includes type, version and etc.

12. System initialization

After success of the initialization, the panel parameters will be restored to the factory setting and

the counter will be test.

13. Test mode

The turnstile will open Bi-direction repeatedly. It is mainly used to test the stability and aging of

control board.