Aurora JJ6003 Руководство по эксплуатации онлайн [5/30] 409678

1.1 Check that the machine and accessories supplied are complete (see list overleaf).

1.2 If using a new stand,drill these according to the template provided with this handbook.

1.3 Attach the motor,starter,and pedals to the stand.

1.4 Choose a motor pulley to achieve the desired machine speed.

1.5 Place the machine in position and screw both thumb screws through from underneath the table

top.

1.6 Remove the machine lid by UN-screwing all four cap head screws through from underneath the

table top.

1.7 Attach the cotton stand to the stand at the rear of the machine.

1.8 Connect the cup opening lever to the pedal using the chain and“S”hooks,Ensure that the cups are

able

to touch when the pedal is released.

1.9 Fit either an endless belt or the belt supplied so that the belt can be moved 3 cm under gentle

hand

pressure at the middle of its span

OVER TENSIONING WILL DAMAGE THE MACHINE

1.10 Run the machine and check that oil is being pumped up to the oil sight dome. If it is not,

please read Section.5.

1.11 The speed of these machines can be 3000 R.P.M. Although we recommend 2500 R.P.M.

Note: If the machine is not an auto-oil type,Please fix the return pipe at the bottom of the base at

first,Then mount the machine at the table.(see fig 2)

Picture 2 Automatic oling