![Ariens SNO-TEK 28E [5/34] Emission control system](/img/pdf.png)
Ariens SNO-TEK 28E [5/34] Emission control system
![Ariens SNO-TEK 28E [5/34] Emission control system](/views2/1509908/page5/bg5.png)
GB - 5
1. WARNING!
2. DANGER!
3. DANGER!
EMISSION CONTROL SYSTEM
This equipment and/or its engine may include
exhaust and evaporative emissions control
system components required to meet U.S.
Environmental Protection Agency (EPA)
and/or California Air Resources Board
(CARB) regulations. Tampering with
emission controls and components by
unauthorized personnel may result in severe
fines or penalties. Emission controls and
components can only be adjusted by an
Ariens Company dealer or an authorized
engine manufacturer's service center.
Contact your Ariens Company Equipment
Retailer concerning emission controls and
component questions.
SAFETY RULES
Read, understand, and follow all safety
practices in owner/operator manual before
beginning assembly or operating. Failure to
follow instructions could result in personal
injury and/or damage to unit.
ALWAYS remove key and/or wire from spark
plug before assembly, maintenance or
service. Unintentional engine start up can
cause death or serious injury.
Complete a walk around inspection of unit
and work area to understand:
• Work area • Your unit • All safety decals
ALWAYS check overhead and side
clearances carefully before operation.
ALWAYS be aware of traffic when operating
along streets or curbs.
Read Owner/Operator Manual.
Keep people away from unit while
operating. Keep children out of
work area and under watchful care
of a responsible adult.
Never direct discharge towards
persons or property that may be
injured or damaged by thrown
objects.
Stop engine, remove key, read
manual before making any repairs
or adjustments.
Wear appropriate hearing
protection.
ONLY use clean-out tool to clear
blockages. NEVER use your
hands.
ROTATING PARTS! ONLY use
clean-out tool to clear blockages.
NEVER use your hands. High
speed impeller rotates below
discharge opening. Wait for all
moving parts to stop before
removing clogs or servicing.
OL1801
OL4370
OL0910
OL4010
OL4690
OS6610
ROTATING PARTS.
Keep clear of auger while engine
is running.
• Read Operator’s Manual.
• Allow operation only by
properly trained adult,
never children.
• Stop engine and remove
ignition key prior to leaving
the operator’s position for
any reason.
• Keep all controls, guards
and safety devices properly
serviced and functional.
• Never direct discharge
towards persons or
property that may be
injured or damaged by
thrown objects.
OS2080
Содержание
- Manuel du propriétaire utilisateur 1
- Models 1
- Owner operator manual 1
- Sno tek 24e 920403 sno tek 28e 1
- Engine manual 2
- Http www ariens com 2
- Introduction 2
- Manuales en idiomas diferentes del ingles 2
- Manuals 2
- Manuels non anglais 2
- Model and serial numbers 2
- Non english manuals 2
- Table of contents 2
- Delivery 3
- Disclaimer 3
- Product registration 3
- Unauthorized replacement parts 3
- Attention 4
- Become alert 4
- Notations 4
- Obey the message 4
- Personal safety is involved 4
- Practices and laws 4
- Required operator training 4
- Safety 4
- Safety alerts 4
- Safety decals and locations 4
- Danger 5
- Emission control system 5
- Safety rules 5
- Warning 5
- Assembly 8
- Package contents 8
- Tools required 8
- Unfold handlebar 8
- Install discharge chute 9
- Install discharge chute crank 9
- Check auger gearcase oil 10
- Check engine crankcase oil 10
- Check function of all controls 10
- Check function of dual handle interlock 10
- Check tire pressure 10
- Fill engine fuel tank 10
- Run in attachment belt 10
- Controls and features 11
- Attachment clutch right hand lever 12
- Controls and features 12
- Dual handle interlock 12
- Engine shutoff switch 12
- Ignition switch push pull safety key 12
- Operation 12
- Primer bulb 12
- Traction drive clutch left hand lever 12
- Choke control 13
- Discharge chute deflector 13
- Fuel shut off valve 13
- Recoil starter handle 13
- Snow clean out tool 13
- Speed selector 13
- Adding a fuel stabilizer to extend fuel storage life 14
- Axle lock pin 14
- Discharge chute 14
- Discharge chute crank 14
- Filling fuel tank 14
- Fuel recommendations 14
- Gasoline 14
- Scraper blade 14
- Skid shoes 14
- Check axle lock pins 15
- Check dual handle interlock 15
- Check engine fuel crankcase oil 15
- Check function of clutches 15
- Check skid shoes 15
- Frozen impeller 15
- Manual start 15
- Pre start 15
- Starting and shut off 15
- To add fuel to fuel tank 15
- To stop in an emergency 15
- Electric start 120v 920402 403 16
- Shut off 16
- Snow removal 16
- Tips for operation 16
- Transport 16
- Traveling 16
- Check dual handle interlock 17
- Check fasteners 17
- Maintenance 17
- Maintenance schedule 17
- Service position 17
- Change engine oil 18
- Check auger gearcase 18
- Check clutch operation 18
- Check clutch spring adjustment 18
- Check engine oil 18
- Check tire pressure 18
- Clean engine 18
- Auger shaft 19
- General lubrication 19
- Scraper blade 19
- Service and adjustments 19
- Skid shoes 19
- Discharge chute deflector 20
- For replacement 20
- Shear bolts 20
- Attachment drive belt replacement 21
- Discharge chute 21
- Remove attachment drive belt 21
- Speed selector adjustment 21
- Replace attachment drive belt 22
- Traction drive belt replacement 23
- Attachment clutch brake adjustment 24
- Check attachment idler arm roller clearance 24
- Remove attachment cable slack 24
- Adjust the attachment clutch cable spring extension 25
- Check attachment brake 25
- Check belt finger clearance 26
- Traction drive clutch adjustment 26
- Friction disc replacement 27
- Remove friction disc 27
- Accessories 28
- Fuel system 28
- Long term 28
- Service parts 28
- Short term 28
- Storage 28
- Does not operate in forward reverse 29
- Engine problems 29
- Engine stops 29
- Engine will not crank start 29
- Problem probable cause correction 29
- Small rubber beads collect in frame 29
- Troubleshooting 29
- Problem probable cause correction 30
- Troubleshooting 30
- Unit throws snow poorly or does not throw snow 30
- Specifications 31
- Customer responsibilities 32
- Exceptions limitations exclusions 32
- Limitations 32
- Service parts and accessories warranty 32
- Sno te 32
- Sno tek two year limited warranty 32
- Two year limited warranty 32
- Disclaimer 33
- Disclaimer of further warranty 33
- Exclusions items not covered by this warranty 33
- Limitation of remedy and damages 33
- Drift cutter 34
- Non abrasive skid shoes 34
- Sno tek cover 34
- Sno tek lct engine maintenance kit 34
Похожие устройства
- Ariens POWER BRUSH 28 Руководство пользователя
- Yanmar YDP 40 STN-E Руководство пользователя
- Sdmo ST 2.36 H Руководство пользователя
- Sdmo TR 2.36 H Руководство пользователя
- Sdmo ST 3.60 H Руководство пользователя
- Sdmo TR 3.60 H Руководство пользователя
- Sdmo HP 2.26 H Руководство пользователя
- Sdmo XC 2.34 H Руководство пользователя
- Honda WMP 20 Руководство пользователя
- Gardena 3500/4E Classic Руководство пользователя
- Whirlpool AWT 2240 Таблица программ
- Whirlpool AWT 2240 Инструкция по эксплуатации
- Kawasaki ZXR 400 Сервисный мануал
- Kawasaki ZXR 400 Инструкция по эксплуатации
- Gardena Classic 4000/4i EP Инструкция по эксплуатации
- Al-Ko HW 600 Eco Инструкция по эксплуатации
- Karcher BP 4 Deep Well Инструкция по эксплуатации
- Karcher BP 6 Deep Well Инструкция по эксплуатации
- Gardena 6000 Classic Инструкция по эксплуатации
- Karcher BP 4 Garden Set Инструкция по эксплуатации
Скачать
Случайные обсуждения