Samsung DSR 9500A [24/38] Connecting your dsr 9500a
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Samsung DSR 9500A [24/38] Connecting your dsr 9500a

Samsung DSR 9500A [24/38] Connecting your dsr 9500a
DSR 9500A FTA, CI, EM VIA, VIA CI
GB-4
DIGITAL SATELLITE RECEIVER
DSR 9500A FTA, CI, EM VIA, VIA CI
GB
GB-5
CONNECTING YOUR "DSR 9500A"
7. INSERTING SMARTCARDS FOR VIACCESS SERVICES
In order to view a scrambled service, you need to have the appropriate
conditional Access Module and a valid Smartcard. This DSR 9500A has the
Viaccess CAS embedded to view Viaccess programmes.
NNoottee : Insert the Smartcard with the gold coloured chip facing downwards.
8. INSERTING COMMON INTERFACE CAM AND SMARTCARD
(For models DSR 9500A CI, DSR 9500A VIA CI)
The DSR 9500A supports Common Interface CAMs under DVB specification.
The CI CAMs include a built-in smart card reader.
● Insert the smart card into the CAM gently with the gold colored chip upwards
● Slide in the CAM gently inside the slot so that it sits in the socket tightly.
● Close the door.
● To remove the CAM push the button provided by the side of the CAM slot.
The CAM will be ejected from the socket.
NNoottee :
The following Common Interface CAMs are available now:
IRDETO, CONAX, CRYPTOWORKS, VIACCESS, NAGRAVISION,
SECA, Etc.
1. LOCATION OF THE RECEIVER
Your
DSR 9500A
should be placed under proper ventilation.
Don’t put in completely enclosed cabinet that will restrict the flow of air,
resulting in overheating.
The location should be safeguarded from direct sunlight,
excess moisture, rough handling or household pets.
Avoid stacking other electronic components on the top of the receiver.
The location should be safely accessible by the cable from your
antenna system.
2. CONNECTING THE RECEIVER WITH DISH SYSTEM
After installing your antenna system, connect the coaxial cable from the
LNB of your antenna to "LNB" terminal marked at the rear
of the
DSR 9500A
.
All cable connectors should be finger tightened; do not use any kind
of wrench while tightenning connectors. The cable should be 75ohm
impedance coaxial twisted at the end with an "F" type connector.
3. CONNECTING THE RECEIVER TO TV
To connect the receiver with your television, you can use three methods;
via Scart Cable, RF cable, or RCA cable.
Connect the RF cable to the terminal marked "
TV
" at the rear panel
of
DSR 9500A
and its other end to the TV RF input socket.
In the case of connecting your TV through
SCART
cable, connect the
SCART
connector marked TV to the respective
SCART
port on the TV.
4. CONNECTING YOUR ANALOG RECEIVER
To facilitate the user using analog receiver to view analog channels,
DSR 9500A
has been provided with a loop through terminal marked as "
LOOP
".
Connect the coaxial cable from this terminal to the IF input terminal of
your analog receiver. Now by keeping the
DSR 9500A
in standby,
you will be able to tune and view analog channels from
your analog receiver.
5. CONNECTING YOUR VCR
To connect a VCR or DVD player, the DSR 9500A has been provided with SCART
at the rear marked "AV2".
Using a SCART connector, the VCR or DVD player can be connected to the receiver.
NNoottee :
This is supported by standby.
6. CONNECTING EXTERNAL AUDIO / HI-FI SYSTEM
To connect any external Audio Hi-Fi system, the receiver has been provided
with two RCA connectors at the back of the receiver,
marked with AUDIO L and R respectively to connect the left and right Audio.
Connecting Figure
CONNECTING YOUR "DSR 9500A"
DSR 9500A_GB 12/8/03 1:03 PM Page 4

Содержание

Похожие устройства

1 LOCATION OF THE RECEIVER 7 INSERTING SMARTCARDS FOR VIACCESS SERVICES Your DSR 9500A should be placed under proper ventilation In order to view a scrambled service you need to have the appropriate Don t put in completely enclosed cabinet that will restrict the flow of air conditional Access Module and a valid Smartcard This DSR 9500A has the resulting in overheating Viaccess CAS embedded to view Viaccess programmes The location should be safeguarded from direct sunlight Woia Insert the Smartcard with the gold coloured chip facing downwards excess moisture rough handling or household pets Avoid stacking other electronic components on the top of the receiver 8 INSERTING COMMON INTERFACE CAM AND SMARTCARD The location should be safely accessible by the cable from your For models DSR 9500A Cl DSR 9500A VIA Cl antenna system The DSR 9500A supports Common Interface CAMS under DVB specification 2 CONNECTING THE RECEIVER WITH DISH SYSTEM The Cl CAMs include a built in smart card reader After installing your antenna system connect the coaxial cable from the LNB of your antenna to LNB terminal marked at the rear Insert the smart card into the CAM gently with the gold colored chip upwards of the DSR 9500A Slide in the CAM gently inside the slot so that it sits in the socket tightly All cable connectors should be finger tightened do not use any kind Close the door of wrench while tightenning connectors The cable should be 75ohm To remove the CAM push the button provided by the side of the CAM slot The CAM will be ejected from the socket impedance coaxial twisted at the end with an F type connector 3 CONNECTING THE RECEIVER TO TV Note The following Common Interface CAMs are available now To connect the receiver with your television you can use three methods IRDETO CONAX CRYPTOWORKS VIACCESS NAGRAVISION via Scart Cable RF cable or RCA cable SEGA Etc Connect the RF cable to the terminal marked TV at the rear panel of DSR 9500A and its other end to the TV RF input socket In the case of connecting your TV through SCART cable connect the SCART connector marked TV to the respective SCART port on the TV 4 CONNECTING YOUR ANALOG RECEIVER To facilitate the user using analog receiver to view analog channels DSR 9500A has been provided with a loop through terminal marked as LOOP Connect the coaxial cable from this terminal to the IF input terminal of your analog receiver Now by keeping the DSR 9500A in standby you will be able to tune and view analog channels from your analog receiver 5 CONNECTING YOUR VCR To connect a VCR or DVD player the DSR 9500A has been provided with SCART at the rear marked AV2 Using a SCART connector the VCR or DVD player can be connected to the receiver Nota This is supported by standby 6 CONNECTING EXTERNAL AUDIO HI FI SYSTEM To connect any external Audio Hi Fi system the receiver has been provided with two RCA connectors at the back of the receiver marked with AUDIO L and R respectively to connect the left and right Audio GB 4 GITA IECEI GB 5 DSR 9500A FTA Cl EM VIA VIA Cl DSR 9500A FTA Cl EM VIA VIA Cl CONNECTING YOUR DSR9500A CONNECTING YOUR DSR 9500A

Скачать
Случайные обсуждения

Ответы 1

Что такое ЛMSUN □8Р9500А РТА, С1, ЕМ 71А, У1А С1?
2 года назад