Dometic TEC 40D [17/220] Attaching the exhaust pipe

TEC40D Installation

➤ Mount the gaskets (available as accessory) to the casing and fix them with the

srews (fig. 3, page 4).

➤ Position the casing in the desired area and attach it with the appropriate screws

(fig. 4, page 4).

➤ Insert the engine plate into the casing and screw it into place (fig. 5, page 4).

➤ Mount the casing cover and attach it with the pins (fig. 6, page 4).

9.3 Attaching the exhaust pipe

Observe the following instructions when installing the exhaust pipe:

• Do not create any sharp bends which will inhibit the flow of exhaust fumes.

➤ Connect the hose (fig. 7 2, page 5) to the muffler (fig. 7 1, page 5) and attach

it with the clamps (fig. 7 4, page 5)

➤ Secure the exhaust pipe extension to the vehicle floor (fig. 7 3, page 5).

9.4 Installing the tank and fuel supply line

Please observe the following instructions for the installation location:

• The tank bottom must be positioned at a maximum of 1 m below the bottom of

the generator.

• The top of the tank must not be higher than the top of the generator.

• The maximum horizontal distance between generator and fuel tank is 3 m.

• Lay the fuel hoses as straight as possible (fig. 8, page 5).

➤ Secure the tank, see fig. 8, page 5 and chapter “Connecting the float” on

page 21.

➤ Connect the fuel hose (fig. 9 1, page 6) to the fuel filter (fig. 9 2, page 6).

➤ Connect the hose to the fuel return (fig. 9 3, page 6).

➤ Secure the hoses with clamps.

TEC40D-I-16s.book Seite 17 Freitag, 12. August 2016 7:06 19