Fluke 355 [22/26] User replaceable parts

353/355

Users Manual

Maintenance

XW Warning

To avoid electrical shock, or personal injury:

• Repairs or servicing not covered in this

manual should be performed only by

qualified personnel.

• Disconnect test leads from the Meter

before removing its back cover.

• Never use the Meter with the back cover

removed.

WCaution

• To avoid contamination or static damage

of the Meter, do not touch the circuit

board without proper static protection.

• If the Meter is not going to be used for an

extended time, remove the battery. Do

not store the Meter in high temperature

or high-humidity environments.

Cleaning the Meter

WCaution

To avoid damaging the meter, do not use

abrasives or solvents on this instrument.

Periodically clean the Meter by wiping it with a damp

cloth.

Changing the Batteries

When battery voltage drops below the value required for

proper operation, the battery symbol (B) appears and

the Meter beeps.

To change the batteries:

1. Turn the Meter off and disconnect the test leads.

2. Using a screwdriver, open the battery cover on the

back of the Meter.

3. Replace the batteries with six new AA/LR6 batteries.

Observe correct polarity when installing the batteries.

4. Close the back cover and tighten the screw.

User Replaceable Parts

Refer to Contacting Fluke for more information.

• C43 Soft carrying case

• TL224 1.5 m silicone rubber test leads

• TP2 Test Probes

• AC285 Alligator Clips