Epson Stylus Pro XL [280/573] These pitches are not available on 9 pin printers

Epson Stylus Pro [280/573] These pitches are not available on 9 pin printers
Select a Font R-49
You can also set the pitch with the ESC c command. This command sets the
horizontal motion index (HMI) in inches per character rather than in cpi. The
format of this command is as follows:
ESC c nL nH
HMI =
( )n nH L× +256
360
inch
nH = INT
HMI × 360
256
nL = MOD
HMI × 360
256
The HMI set with the ESC c command cancels the pitch set with the ESC X
command.
The following commands cancel the HMI set with the ESC c command:
ESC W Double-width ESC P Select 10 cpi
ESC M Select 12 cpi ESC w Double-height
ESC SP Additional space ESC g Select 15 cpi
SI Condensed printing ESC p Select proportional
SO Double-width ESC ! Master select
DC2 Cancel condensed ESC @ Reset
DC4 Cancel double-width ESC X Select pitch and point
ESC/P 2 ESC/P 9-Pin ESC/P
Non-ESC/P 2 printers and typefaces not available in multipoint mode
For previous ESC/P-level printers, as well as ESC/P 2 printers that are not in
multipoint mode, you can adjust the character pitch by setting the following
features:
Proportional spacing 10-cpi character spacing
12-cpi character spacing 15-cpi character spacing
Condensed printing Intercharacter spacing
Double-width printing
The following commands produce the fixed pitches indicated:
Pitch Individual commands Master Select
5 cpi ESC W 1, ESC P ESC ! 32
6 cpi ESC W 1, ESC M ESC ! 33
7.5 cpi* ESC W 1, ESC g ESC ! 32, ESC g
10 cpi ESC P ESC ! 0
12 cpi ESC M ESC ! 1
15 cpi* ESC g N/A
17 cpi ESC P, SI ESC ! 4
20 cpi ESC M, SI ESC ! 5
*These pitches are not available on 9-pin printers.

Содержание

Скачать