Zanussi FJS 974 N [21/42] Machine does not spin
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Zanussi FJS 974 N [21/42] Machine does not spin

Zanussi FJS 974 N [21/42] Machine does not spin
21
ENGLISH
• The door will not open:
If you are unable to identify or solve the problem,
contact our service centre. Before telephoning,
make a note of the model, serial number and
purchase date of your machine: the Service Centre
will require this information.
• The programme is still running.
• The door lock has not been released, the door
locked light is still on.
• There is water in the drum.
• Unsatisfactory washing
results:
• Too little detergent or unsuitable detergent has
been used.
• Stubborn stains have not been treated prior to
washing.
• The correct temperature or programme was not
selected.
• Excessive laundry load.
• Detergent residue is left after
the wash cycle:
• This is most problaby due to non soluble
components contained in modern detergents. It is
not a sign of inadequate rinsing.
Brush or shake the garments and, if necessary,
wash them again.
• Foam remains after the last
rinse:
• Modern detergents can produce foam even after
rinsing, but this will not affect the quality of the
wash.
• Spinning starts late or the
machine does not spin:
• The electronic unbalance detection device has cut in
because the laundry is not evenly distributed in the
drum. The laundry is redistributed by reverse
rotation of the drum. This may happen several times
before the unbalance disappears and normal
spinning can resume. If, after 10 minutes, the
laundry is still not evenly distributed in the drum, the
machine will not spin. In this case, redistribute the
load manually and reselect the spin programme.
• The machine makes an
unusual noise:
• The machine is fitted with a type of motor which
makes an unusual noise compared with other
traditional motors. This new motor ensures a
softer start and more even distribution of the
laundry in the drum when spinning, as well as
increased stability of the machine.
• No water is visible in the
drum:
• Machines based on modern technology operate
very economically using very little water without
affecting performance.
Problem Possible cause
Mod. ..........
Prod. No. ...........
Ser. No. .........
Mod.
..........
Ser.
P0042
124972380 FJS 974 N gb 28-06-1999 10:09 Pagina 21

Содержание

Похожие устройства

Problem The door will not open X 0 Possible cause 0 z LU The programme is still running The door lock has not been released the door locked light is still on There is water in the drum Spinning starts late or the machine does not spin The electronic unbalance detection device has cut in because the laundry is not evenly distributed in the drum The laundry is redistributed by reverse rotation of the drum This may happen several times before the unbalance disappears and normal spinning can resume If after 10 minutes the laundry is still not evenly distributed in the drum the machine will not spin In this case redistribute the load manually and reselect the spin programme The machine makes an unusual noise The machine is fitted with a type of motor which makes an unusual noise compared with other traditional motors This new motor ensures a softer start and more even distribution of the laundry in the drum when spinning as well as increased stability of the machine No water is visible in the drum Machines based on modern technology operate very economically using very little water without affecting performance Unsatisfactory washing results Too little detergent or unsuitable detergent has been used Stubborn stains have not been treated prior to washing The correct temperature or programme was not selected Excessive laundry load Detergent residue is left after the wash cycle This is most problaby due to non soluble components contained in modern detergents It is not a sign of inadequate rinsing Brush or shake the garments and if necessary wash them again Foam remains after the last rinse Modern detergents can produce foam even after rinsing but this will not affect the quality of the wash If you are unable to identify or solve the problem contact our service centre Before telephoning make a note of the model serial number and purchase date of your machine the Service Centre will require this information 21

Скачать