AGU TB4 Froggy [52/88] Operating principles and procedures

• to put the thermometer in the water and turn it on;

• aer 30 seconds, evaluate the result*;

• if necessary, add hot or cold water to the bath, then again evaluate the re-

sult* of measured water temperature.

ATTENTION! For correct measurement of the temperature during the

preparation of bathing water, the water must be thoroughly mixed.

*The results of the water temperature measurement are updated and dis-

played on the thermometer for Bath AGU TB4 every 30 seconds.

OPERATING PRINCIPLES AND PROCEDURES

ATTENTION! The results of the rst measurement will appear

in 30 seconds aer turning on the device.

Note: the unit of measurement (degrees Celsius or Fahrenheit) can be

changed within the rst 5 seconds aer the thermometer is turned on by

pressing and holding the ON/OFF button for 2 seconds.

1. Put the device into the water.

2. Press and release the ON/OFF button. The display will show

and

the symbol , conrming that the device is working correctly.

3. Aer 30 seconds, the display will show the numerical value of the water