Sole Fitness E98 [6/29] Grounding instructions

E98 ELLIPTICAL3

WARNING!

NEVER remove any cover without rst disconnecting AC power.

If voltage varies by ten percent (10%) or more, the performance of your elliptical may be

aected. Such conditions are not covered under your warranty. If you suspect the voltage is

low, contact your local power company or a licensed electrician for proper testing.

NEVER expose this elliptical to rain or moisture. This product is NOT designed for use outdoors,

near a pool or spa, or in any other high humidity environment. The operating temperature

specication is 40 to 120 degrees Fahrenheit, and humidity is 95% non-condensing

(no water drops forming on surfaces).

IMPORTANT ELECTRICAL INSTRUCTIONS

GROUNDING INSTRUCTIONS

This product must be grounded. If the elliptical should malfunction or breakdown, ground-

ing provides a path of least resistance for electric current, reducing the risk of electric shock.

This product is equipped with a cord having an equipment-grounding plug. The plug must be

plugged into an appropriate outlet that is properly installed and grounded in accordance with

all local codes and ordinances.

DANGER - Improper connection of the equipment-grounding conductor can result in a risk

of electric shock. Check with a qualied electrician or serviceman if you are in doubt as to

whether the product is properly grounded. Do not modify the plug provided with the

product if it will not t the outlet; have a proper outlet installed by a qualied electrician.

This product is for use on a nominal 110-volt circuit, and has a grounding plug that looks like

the plug illustrated below. A temporary adapter that looks like the adapter illustrated below

may be used to connect this plug to a 2-pole receptacle as shown below if a properly grounded

outlet is not available. The temporary adapter should be used only until a properly grounded

outlet, (shown below) can be installed by a qualied electrician. The green colored rigid ear-lug,

or the like, extending from the adapter, must be connected to a permanent ground such as a

properly grounded outlet box cover. Whenever the adapter is used, it must be held in place by a

metal screw.