Home
Главная
Electrolux
Кофемашина
ECG 6400
Руководство пользователя Страница: 45

Electrolux ECG 6400 [45/212] Cleaning the steam nozzle

To avoid any residual water mixing in

with the milk when frothing, the water

should be drained off beforehand. To

do this, place a container under the

steam nozzle and turn the knob for

steam and hot water (Fig. 9) to position

until steam emission starts. Then

turn the knob back to position .

0 Pour low-fat, cold milk into a mug

which must be small enough to fit

under the steam nozzle.

The milk should be cold. You should

also use a cold mug, preferably a stain-

less steel one, which should not be

rinsed beforehand in hot water.

0 Swing out the steam nozzle and hold

the mug under the steam nozzle so

that the nozzle opening is just

immersed in the milk (Fig. 25).

Attention! Risk of impurities from

dried on milk residues in the steam

nozzle. Take care not to immerse the

steam nozzle in the milk far enough to

cover the air intake opening at the top

of the steam nozzle. Otherwise milk

can be sucked into the nozzle and

cause impurities in the steam nozzle.

0 Turn the knob for steam and hot water

(Fig. 9) to the position . The display

shows the steam process («STEAM»).

The milk is frothed.

To obtain a creamier froth, slowly move

the container upwards. Froth the milk

to at least twice its volume.

You should not discharge steam for

more than two minutes at a time.

0 To end the frothing, turn the knob for

steam and hot water (Fig. 9) to the

position and then remove the mug.

The display once again indicates readi-

ness for steaming ( «STEAM -

TURN KNOB FOR STEAM».

Caution! Danger of scalding from hot

milk spray! Switch the steam off before

removing the mug with the frothed

milk.

0 Exit the steam mode by pressing the

"Steam" key (Fig. 24) or wait approx.

120 sec. for the machine to automati-

cally return to the coffee mode; the

display shows «PLEASE WAIT…».

Now the machine is once again ready

for making coffee; the last selected

coffee setting is shown in the display.

0 Each time you have frothed milk, let

off some hot water through the nozzle

for a short time by turning the knob

for steam and hot water (Fig. 6) to the

position.

This is necessary to prevent milk resi-

dues drying inside the nozzle, and

thereby blocking it. Use a suitable con-

tainer to catch the water. During this

process the display shows «HOT

WATER».

0 Then return the knob to the position

; the last selected coffee setting is

shown in the display.

10.1 Cleaning the steam nozzle

Important: To guarantee hygiene, you

are recommended to follow this proce-

dure each time you make frothed milk,

to avoid milk stagnating in the nozzle.

0 Turn the knob for steam and hot water

clockwise as far as it will go to the

position . Wait a couple of minutes

for the steam nozzle to cool down.

0 Then with one hand hold the swivel

pipe handle firm and with the other

disengage the bayonet connection of

the steam nozzle by turning it slightly

clockwise. Remove the steam nozzle by

pulling it downwards (Fig. 26).

0 Remove the inner part of the steam

nozzle from the swivel pipe by pulling

it downwards.

0 Carefully wash the steam nozzle and

the inner part in warm water.

0 Make sure the two holes shown in fig.

27 are not blocked. If necessary, pierce

them with a pin and clean them.

0 Replace the inner part by pushing it

slightly upwards onto the swivel pipe.

0 Replace the steam nozzle by pushing it

upwards and turning it anticlockwise.

822_949_353 CG6400_Elux.book Seite 45 Dienstag, 20. Februar 2007 10:09 22

Содержание

Похожие устройства

822 949 353 CG6400 Eluxbook Seite45 Dienstag 20 Februar2007 10 0922 GB j To avoid any residual water mixing in with the milk when frothing the water should be drained off beforehand To do this place a container under the steam nozzle and turn the knob for steam and hot water Fig 9 to position until steam emission starts Then turn the knob back to position CSV Pour low fat cold milk into a mug which must be small enough to fit under the steam nozzle j The milk should be cold You should also use a cold mug preferably a stain less steel one which should not be rinsed beforehand in hot water CSV Swing out the steam nozzle and hold the mug under the steam nozzle so that the nozzle opening is just immersed in the milk Fig 25 j Attention I Risk of impurities from 1 dried on milk residues in the steam nozzle Take care not to immerse the steam nozzle in the milk far enough to cover the air intake opening at the top of the steam nozzle Otherwise milk can be sucked into the nozzle and cause impurities in the steam nozzle CSV Turn the knob for steam and hot water Fig 9 to the position Q iij The display shows the steam process STEAM The milk is frothed j To obtain a creamier froth slowly move the container upwards Froth the milk to at least twice its volume You should not discharge steam for more than two minutes at a time CSV To end the frothing turn the knob for steam and hot water Fig 9 to the position and then remove the mug The display once again indicates readi ness for steaming STEAM TURN KNOB FOR STEAM j Caution Danger of scalding from hot milk spray Switch the steam off before removing the mug with the frothed milk 120 sec for the machine to automati cally return to the coffee mode the display shows PLEASE WAIT Now the machine is once again ready for making coffee the last selected coffee setting is shown in the display CSV Each time you have frothed milk let off some hot water through the nozzle for a short time by turning the knob for steam and hot water Fig 6 to the in position This is necessary to prevent milk resi dues drying inside the nozzle and thereby blocking it Use a suitable con tainer to catch the water During this process the display shows HOT WATER CSV Then return the knob to the position the last selected coffee setting is shown in the display 10 1 Cleaning the steam nozzle Important To guarantee hygiene you are recommended to follow this proce dure each time you make frothed milk to avoid milk stagnating in the nozzle CSV Turn the knob for steam and hot water clockwise as far as it will go to the position Wait a couple of minutes for the steam nozzle to cool down CSV Then with one hand hold the swivel pipe handle firm and with the other disengage the bayonet connection of the steam nozzle by turning it slightly clockwise Remove the steam nozzle by pulling it downwards Fig 26 CSV Remove the inner part of the steam nozzle from the swivel pipe by pulling it downwards CSV Carefully wash the steam nozzle and the inner part in warm water CSV Make sure the two holes shown in fig 27 are not blocked If necessary pierce them with a pin and clean them CSV Replace the inner part by pushing it slightly upwards onto the swivel pipe CSV Replace the steam nozzle by pushing it upwards and turning it anticlockwise CSV Exit the steam mode by pressing the Steam key Fig 24 or wait approx 45

Скачать