Zanussi FE 1014 N [8/92] Electrical connection

Zanussi FE 1014 N [8/92] Electrical connection
8
Water drainage
The end of the drain hose can be positioned in three
ways:
Hooked over the edge of a sink using the plastic
hose guide supplied with the machine. In this
case, make sure the end cannot come unhooked
when the machine is emptying.
This could be done by tying it to the tap with a piece
of string or attaching it to the wall.
In a sink drain pipe branch. This branch must be
above the trap so that the bend is at least 60 cm
above the ground.
Directly into a drain pipe at a height of not less
than 60 cm and not more than 90 cm.
The end of the drain hose must always be
ventilated, i.e. the inside diameter of the drain pipe
must be larger than the outside diameter of the drain
hose.
The drain hose must not be kinked. Run it along the
floor; only the part near the drainage point must be
raised.
P0023
P0022
Electrical connection
This machine is designed to operate on a 220-230
V, single-phase, 50 Hz supply.
Check that your domestic electrical installation can
take the maximum load required (2.2 kW), also
taking into account any other appliances in use.
Connect the machine to an earthed socket.
The manufacturer declines any responsibility
for damage or injury through failure to comply
with the above safety precaution.
Should the appliance power supply cable
need to be replaced, this should be carried
out by our Service Centre.
Please ensure that when the appliance is
installed the power supply cable is easily
accessible.
132996790.qxd 10/12/01 12:20 PM Pagina 8 (Nero/Process Black pellicola)

Содержание

Похожие устройства

Water drainage Electrical connection The end of the drain hose can be positioned in three ways This machine is designed to operate on a 220 230 V single phase 50 Hz supply Hooked over the edge of a sink using the plastic hose guide supplied with the machine In this Check that your domestic electrical installation can take the maximum load required 2 2 kW also taking into account any other appliances in use case make sure the end cannot come unhooked when the machine is emptying This could be done by tying it to the tap with a piece of string or attaching it to the wall Connect the machine to an earthed socket The manufacturer declines any responsibility for damage or injury through failure to comply with the above safety precaution Should the appliance power supply cable need to be replaced this should be carried out by our Service Centre Please ensure that when the appliance is installed the power supply cable is easily accessible In a sink drain pipe branch This branch must be above the trap so that the bend is at least 60 cm above the ground Directly into a drain pipe at a height of not less than 60 cm and not more than 90 cm The end of the drain hose must always be ventilated i e the inside diameter of the drain pipe must be larger than the outside diameter of the drain hose The drain hose must not be kinked Run it along the floor only the part near the drainage point must be raised 8