Elenberg DW-600 [22/24] Main technical data

allowed to open after pressing the pause button. At the beginning of each cycle,

the dishwasher always starts in the “drain” mode. This is because the drain

pump always retains a small amount of water (in the sump) from the previous

cycle. This is necessary to keep the pump primed. Therefore, do not be alarmed

if you see a small amount of water being pumped-out from the drain hose prior

to the start of the regular wash cycle (THIS IS NORMAL).

CLEANING YOUR DISHWASHER AND FILTER

After each wash cycle unload the dishwasher, remove the filter, clean off any bits of

food, by placing the filter under a running cold water tape please ensure that the

filter is replaced back into the correct position before you next wash.

INTENSIVE WASH

Water Temperature Wash 65°C / Rinse 69°C

Programme Duration + Heating Time 129 minutes

Water Consumption 10,4 litres

NORMAL WASH

Water Temperature Wash 52°C / Rinse 67°C

Programme Duration + Heating Time 130 minutes

Water Consumption 10,4 litres

RAPID WASH

Water Temperature Wash 49°C / Rinse 55°C

Programme Duration + Heating Time 60 minutes

Water Consumption 9,6 litres

Model DW-600

Power input 1380W

Outer dimension 570 x 480 x 466mm

Weight About 22.5kg

Max. water Consumption (Normal wash) 10,4 L

Water pressure 0.03~1MPa

Control manner Automatic

Detergent dosage 12g

Plate setting 4 sets

MAIN TECHNICAL DATA

PROgRAMME SUMMARY / SELECTION