Ada ProDigit 30 А00167 [41/50] Prodigit 30

ProDigit 30

MEASUREMENT FOUNDATION

ProDigit 30

Turn on the level. The LCD screen indicates the absolute angle between true level and the working surface.

Press the REF button to enter relative angle measurement mode. The current angle will be considered to be 0.0° and the display will

read 0.0°.

Place the digital level on the Second working surface and the relative angle between the First working surface and the Second working

surface will be displayed. The zero line indicates the First working surface position, and the arrow indicates the direction

of the Second working surface either above or below the First working surface level.

At this point you can change the display units for the measured angle from degrees (°) to pitch (inch/foot) or slope (%) by pressing the

conversion button.

Maintenance

This digital laser level has been designed to be a low-maintenance tool. However, in order to maintain its performance, follow these

steps.

HANDLE the tool with care. Treat it as a precision optical device, such as a camera or binoculars.

11. AVOID exposing the tool to shock, continuous vibration or extreme hot or cold temperatures.

STORE the tool indoors and in a safe place.

The Level is designed to be weather resistant and construction site tough. If the level is splashed with mortar or other construction

site residue, simply wipe clean with a damp cloth. DO NOT immerse the level in water.

Aluminum surfaces can be cleaned with a non-abrasive powder.

Check the batteries regularly to avoid corrosion. REMOVE the batteries from the tool if it is not going to be used for an extended

period.

DO NOT try to take the level apart.

•