Delta Electronics VFD022CB23A-21M [4/363] Nameplate information

Chapter 1 Introduction|C200 Series

1-1

Chapter 1 Introduction

Receiving and Inspection

After receiving the AC motor drive, please check for the following:

1. Please inspect the unit after unpacking to assure it was not damaged during shipment. Make sure

that the part number printed on the package corresponds with the part number indicated on the

nameplate.

2. Make sure that the voltage for the wiring lie within the range as indicated on the nameplate. Please

install the AC motor drive according to this manual.

3. Before applying the power, please make sure that all the devices, including power, motor, control

board and digital keypad, are connected correctly.

4. When wiring the AC motor drive, please make sure that the wiring of input terminals “R/L1, S/L2,

T/L3” and output terminals”U/T1, V/T2, W/T3” are correct to prevent drive damage.

5. When power is applied, select the language and set parameter groups via the digital keypad

(KPE-LE02). When executes trial run, please begin with a low speed and then gradually increases

the speed untill the desired speed is reached.

Nameplate Information

MODEL VFD007CB43A-20:

INPUT :

Normal Duty: 3PH 380-480V 50/60Hz 4.3A

Heavy Duty: 3PH 380-480V 50/60Hz 4.1A

OUTPUT :

Normal Duty: 3PH 380-480V 3A 2.4KVA 1HP

Heavy Duty: 3PH 380-480V 2.9A 2.3KVA 1HP

FREQUENCY RANGE :

Normal Duty: 0-600Hz

Heavy Duty: 0-300Hz

Version:VX.XX

007CBEAIT1080001

DALTA ELECTRONICS. INC.

MADE IN xxxxxxxx

Enclosure type (IPXX)

Ac Drive Model

Input Voltage/Current

Output Voltage/Current

Frequency Range

Firmware Version

Certifications

Serial Number