Home
Главная
Scarlett
Утюг
IS-511
Инструкция по эксплуатации Страница: 5

Scarlett IS-511 [5/46] The water tank filling

INSTRUCTION MANUAL

• When the indicator light has gone out you can start

ironing.

2.2. THE WATER TANK FILLING

• Unplug the iron before filling the water tank.

• Hold the steam iron in horizontal position.

• Slowly pour water through the water inlet.

• Do not fill higher than mark on the water tank, in order

to avoid water spilling.

• The opening which is used for pouring water should be

closed when the iron is in use.

• Always unplug the iron from the power socket when

refilling the water reservoir.

• Your steam iron is designed to use tap water. However, if the

water is very hard, it is advisable to use distilled water.

• The water tank should be emptied after each use.

• If you empty the water tank after the steam iron iron has cooled

down, set the steam iron in an upright position on its heel rest,

plug it in set the temperature control dial to the maximal position,

heat for 2 minutes. Unplug the steam iron from the power supply.

2.3 SPRAYING

• As long as there is enough water in the water tank, you

may use the spray button at any temperature setting

either on steam or dry ironing.

• Press the spray button several times to activate the

pump while you are ironing.

2.4. STEAM IRONING

• Set the temperature control dial to the «••» or «•••»

position.

• Set the variable steam control to the middle position.

Avoid coming in contact with ejected steam.

2.5. DRY IRONING

• The steam iron can be used on the dry setting with or

without water in the water tank, however it is best to

avoid having the water tank too full while dry ironing.

• Turn the variable steam control to the minimum

position.

• Select the setting on the temperature control dial best

suited for the fabric to be ironed.

If the steam iron has been used for a long time, it is hot and

there is no water. Do not reﬁll it withwater until the steam iron

has cooled down.

2.6. BURST OF STEAM

• The burst of steam feature provides additional steam

for removing stubborn wrinkles.

• Turn the temperature control dial to the «••» or «•••»

position.

• Turn the variable steam control to the maximum

position.

• Press the powerful steam button to release the burst of

steam.

To prevent water leakage from the soleplate, do not keep the

powerful steam button pressed for more than 5 seconds.

2.7.VERTICAL STEAM

• Ensure that there is enough water in the water tank.

• Stand the steam iron on its heel rest on an iron-safe

surface and plug it.

• Set the temperature control dial and variable steam control

to their maximum positions.

• Hold the iron vertically and press the steam burst button,

an intense steam will be ejected from the soleplate.

Scarlett IS-511 [5/46] The water tank filling

Содержание

Похожие устройства