Qtech QSW-8200-52T-AC — настройка LLDP: команды и параметры для конфигурации [36/85]

Превью страниц Страница 36 / 85

User Manual

Chapter 5. Commands for LLDP Function 36

www.qtech.ru

 no lldp transmit optional tlv

 Function: Configure the type of optional TLV of the port.

 Parameters: portDesc: the description of the port; sysName: the system name;

sysDesc: The description of the system; sysCap: the capability of the system.

 Default: The messages carry no optional TLV by default.

 Command Mode: Port Configuration Mode.

 Usage Guide: When configuring the optional TLV, each TLV can only appear once in a

message, portDesc optional TLV represents the name of local port; sysName optional

TLV represents the name of local system; sysDesc optional TLV represents the

description of local system; sysCap optional TLV represents the capability of local

system.

 Example: Configure that port ethernet 1/0/5 of the switch carries portDesc and sysCap

TLV.

 Switch(config)#in ethernet 1/0/5

 Switch(Config-If-Ethernet1/0/5)# lldp transmit optional tlv portDesc sysCap

5.13 lldp trap

 Command: lldp trap <enable | disable>

 Function: enable: configure to enable the Trap function on the specified port; disable:

configure to disable the Trap function on the specified port.

 Parameters: None.

 Default: The Trap function is disabled on the specified port by default.

 Command Mode: Port Configuration Mode.

 Usage Guide: The function of sending Trap messages is enabled on the port.

 Example: Enable the Trap function on port ethernet 1/0/5 of the switch.

 Switch(config)#in ethernet1/0/5

 Switch(Config-If-Ethernet1/0/5)#lldp trap enable

5.14 lldp tx-interval

 Command: lldp tx-interval <integer>

 no lldp tx-interval

 Function: Set the interval of sending update messages on all the ports with LLDP

function enabled, the value of which ranges from 5 to 32768 seconds and is 30 seconds

by default.

 Parameters: <integer> is the interval of sending updating messages, ranging from 5 to

32768 seconds.

 Default: 30 seconds.

 Command Settings: Global Mode.

 Usage Guide: After configuring the interval of sending messages, LLDP messages can

only be received after a period as long as configured. The interval should be less than or