Qtech QSW-8200-52T-AC — команды для управления мониторингом трансиверов DDM [82/85]

Превью страниц Страница 82 / 85

User Manual

Chapter 12. Commands for DDM 82

www.qtech.ru

Chapter 12 COMMANDS FOR DDM

12.1 clear transceiver threshold-violation

 Command: clear transceiver threshold-violation [interface ethernet <interface-list>]

 Function: Clear the threshold violation of the transceiver monitoring.

 Parameter: interface ethernet <interface-list>: The interface list that the threshold

violation of the transceiver monitoring needs to be cleared.

 Command Mode: Admin mode

 Default: None.

 Usage Guide: None.

 Example: Clear he threshold violation of the transceiver monitoring on port 21, 25, 26,

28.

 Switch#clear transceiver threshold-violation interface ethernet 1/0/21;25-26;28

12.2 debug transceiver

 Command: debug transceiver {on | off}

 Function: Enable/disable DDM debugging.

 Parameter: on/off: Enable or disable the debugging.

 Command Mode: Admin mode

 Default: Off.

 Usage Guide: Disable the DDM debugging with ctrl+o.

 Example: Enable DDM debugging.

 Switch#debug transceiver on

12.3 show transceiver

 Command: show transceiver [interface ethernet <interface-list>] [detail]

 Function: Show the monitoring of the transceiver.

 Parameter: interface ethernet <interface-list>: The interface list that the monitoring of

the transceiver needs to be shown.

 detail：Show the detailed monitoring of the transceiver.

 Command Mode: User mode, admin mode and global mode

 Default: None.

 Usage Guide: Temperature can be accurate to the integer, other values can be accurate

to the second bit after the radix point. When the parameter exceeds the warning

threshold, it is shown with ‘W+’ or ‘W-’, when the parameter exceeds the alarm

threshold, it is shown with ‘A+’ or ‘A-’, no tagged parameter is normal.

 Example: Show the brief DDM information of all ports.

 Switch#show transceiver