Qtech QSW-8200-52T-AC Команды для функции безопасности онлайн [102/114] 481623

User Manual

Chapter 11. Commands for SAVI 102

www.qtech.ru

 Command: savi ipv6 check source binding ip <ip-address> mac <mac-address>

interface <if-name> {type [slaac | dhcp] lifetime <lifetime> | type static}

 no savi ipv6 check source binding ip <ip-address> interface <if-name>

 Function: Configure the static or dynamic binding function manually; the no command

deletes the configured binding.

 Parameter: ip-address: is the unicast IPv6 address, including local link and global

unicast address

 mac-address: is the mac address of Ethernet

 if-name: is the port name, like interface ethernet 1/0/1

 slaac|dhcp: slaac means create the dynamic binding for slaac type, dhcp

means create the dynamic binding for dhcp type

 lifetime: configure the lifetime period for the dynamic binding, the unit

is second.

 static: create the binding of the static type.

 Command Mode: Global Mode.

 Default: None.

 Usage Guide: After the dynamic binding configured by handwork is overtime, the

corresponding binding will be deleted but the configuration is still be kept, so the

binding still be shown. If the binding needs to take effect again, it should delete it first

and configure a new binding again.

 When the binding type is static type, do not configure lifetime period, the lifetime

period is infinite.

 Example: Configure the dynamic binding of slaac type for SAVI manually.

 Switch(config)#savi ipv6 check source binding ip 2001::10 mac 00-25-64-BB-8F-04

Interface ethernet1/0/1 type slaac lifetime 2010

 Configure the static binding for SAVI manually.

 Switch(config)#savi ipv6 check source binding ip 2001::20 mac 00-25-64-BB-8F-04

 Interface ethernet1/0/1 type static

11.1.9 savi ipv6 check source ip-address mac-address

 Command: savi ipv6 check source [ip-address mac-address | ip-address | mac-

address]

 no savi ipv6 check source

 Function: Enable the control authentication function for the packets of the port, no

command disables this function.

 Parameter: None.

 Command Mode: Port Mode.

 Default: Disable the control filtering function of the port.

 Usage Guide: The global SAVI function must be enabled before configuring this

command.

 Example: Enable the control filtering function of the packets on port ethernet1/0/1.