Qtech QSW-8200-52T-AC [105/114] Commands for monitor and debug

User Manual

Chapter 11. Commands for SAVI 105

www.qtech.ru

 Parameter: protect-time: set the ranging between 1 and 300 seconds, its default value

is 30 seconds.

 Command Mode: Global Mode.

 Default: 30 seconds.

 Usage Guide: After the configured lifetime period is overtime, the port is still at down

state, the binding of this port will be deleted. If the port state is changed from down to

up state during the configured lifetime period, the binding of the port will reset it as

lifetime period of BOUND state. If the configured parameter is 0 second, all binding of

the port will be deleted immediately.

 Example: Set bind-protect lifetime period to be 20 seconds.

 Switch(config)#savi timeout bind-protect 20

11.2 Commands for Monitor and Debug

11.2.1 Monitor and Debugg

11.2.1.1 debug ipv6 dhcp snooping binding

 Command: debug ipv6 dhcp snooping binding

 no debug ipv6 dhcp snooping binding

 Function: Enable binding debug of dhcp type for SAVI, no command disables the debug.

 Parameter: None.

 Command Mode: Admin Mode.

 Default: None.

 Usage Guide: After enable this function, the relative binding of dhcp type or static type

create the print information for misarranging. The no command disables this function.

 Example: Enable the binding debug of dhcp type.

 Switch#debug ipv6 dhcp snooping binding

11.2.1.2 debug ipv6 dhcp snooping event

 Command: debug ipv6 dhcp snooping event

 no debug ipv6 dhcp snooping event

 Function: Enable event debug of dhcp type for SAVI, no command disables the debug.

 Parameter: None.

 Command Mode: Admin Mode.

 Default: None.

 Usage Guide: After enable event debug, the relative event information of dhcp type will

be print for misarranging. The no command disables this function.

 Example: Enable binding event debug of dhcp type.

 Switch#debug ipv6 dhcp snooping event

11.2.1.3 debug ipv6 dhcp snooping packet