Qtech QSW-8200-52T-AC [43/114] Dot1x privateclient protect enable

User Manual

Chapter 2. Commands for 802.1x 43

www.qtech.ru

 Usage Guide: To implement Qtech’s integrated solution, the switch must be enabled to

use Qtech’s private 802.1x protocol, or many applications will not be able to function.

For detailed information, please refer to Qtech’s DCBI integrated solution. If the switch

forces the authentication client to use Qtech’s private 802.1x protocol, the standard

client will not be able to work.

 Example: To force the authentication client to use Qtech’s private 802.1x

authentication protocol.

 Switch(config)#dot1x privateclient enable

2.22 dot1x privateclient protect enable

 Command: dot1x privateclient protect enable

 no dot1x privateclient protect enable

 Function: Enable the privateclient protect function of the switch, the no command

disables the protect function.

 Parameter: None.

 Command mode: Global Mode

 Default: Disable the privateclient protect function.

 Usage Guide: Support the partial encryption of the privateclient protocol to advance

the security of the privateclient.

 Example: Enable the privateclient protect function of the switch.

 Switch(config)#dot1x privateclient protect enable

2.23 dot1x re-authenticate

 Command: dot1x re-authenticate [interface <interface-name>]

 Function: Enables real-time 802.1x re-authentication (no wait timeout requires) for all

ports or a specified port.

 Parameters: <interface-name> stands for port number, omitting the parameter for all

ports.

 Command mode: Global Mode.

 Usage Guide: This command is a Global Mode command. It makes the switch to re-

authenticate the client at once without waiting for re-authentication timer timeout.

This command is no longer valid after authentication.

 Example: Enabling real-time re-authentication on port1/0/8.

 Switch(config)#dot1x re-authenticate interface ethernet 1/0/8

2.24 dot1x re-authentication

 Command: dot1x re-authentication