Qtech QSW-8200-52T-AC — user Manual: Commands for Displaying Log Information [12/25]

Превью страниц Страница 12 / 25

User Manual

Chapter 1. Commands for Show 12

www.qtech.ru

1.15 show logging buffered

 Command: show logging buffered [level {critical | warnings} | range <begin-index>

<end-index>]

 Function: This command displays the detailed information in the log buffer channel.

This command is not supported on low end switches.

 Parameter: level {critical | warnings} means the level of critical information. <begin-

index> is the index start value of the log message, the valid range is 1-65535, <end-

index> is the index end value of the log message, and the valid range is 1-65535. When

only display logging buffered information of the line card must be added range

parameter, but the main control has not the request.

 Command Mode: Admin and Configuration Mode.

 Default: No parameter specified indicates all the critical log information will be

displayed.

 Usage Guide: Warning and critical log information is saved in the buffer zone. When

displayed to the terminal, their display format should be: index ID time <level> module

ID [mission name] log information.

 Example 1: Display the critical log information in the log buffer zone channel and

related to the main control with index ID between 940 and 946.

 Switch#show logging buffered level critical range 940 946

 Example 2: Display all the information which level is warning in the log buffer zone

channel.

 Switch#show logging buffered level warning

1.16 show logging executed-commands state

 Command: show logging executed-commands state

 Function: Show the state of logging executed-commands.

 Parameter: None.

 Command Mode: Admin mode.

 Default: None.

 Usage Guide: Use this command to display the state (enable or disable).

 Example:

 Switch#show logging executed-commands state

 Logging executed command state is enable

1.17 show logging source

 Command: show logging source mstp

 Function: Show the log information source of MSTP module.

 Parameters: None.

 Default: None.