Qtech QSW-8200-28T-AC [77/114] Chapter 7 commands for ipv6 security ra

User Manual

Chapter 7. Commands for IPv6 Security RA 77

www.qtech.ru

Chapter 7 COMMANDS FOR IPV6 SECURITY RA

7.1 ipv6 security-ra enable

 Command: ipv6 security-ra enable

 no ipv6 security-ra enable

 Function: Globally enable IPv6 security RA function, all the RA advertisement messages

will not be forwarded through hardware, but only sent to CPU to handle. The no

operation of this command will globally disable IPv6 security RA function.

 Parameters: None.

 Command Mode: Global Configuration Mode.

 Default: The IPv6 security RA function is disabled by default.

 Usage Guide: Only after enabling the global security RA function, the security RA on a

port can be enabled. Globally disabling security RA will clear all the configured security

RA ports. The global security RA function and the global IPv6 SAVI function are mutually

exclusive, so they can not be enabled at the same time.

 Example: Globally enable IPv6 security RA.

 Switch(config)#ipv6 security-ra enable

7.2 ipv6 security-ra enable

 Command: ipv6 security-ra enable

 no ipv6 security-ra enable

 Function: Enable IPv6 security RA on a port, causing this port not to forward the

received RA message. The no ipv6 security-ra enable will disable the IPv6 security RA

on a port.

 Parameters: None.

 Command Mode: Port Configuration Mode.

 Default: IPv6 security RA function is disabled by default.

 Usage Guide: Only after globally enabling the security RA function, can the security RA

on a port be enabled. Globally disabling security RA will clear all the configured security

RA ports.

 Example: Enable IPv6 security RA on a port.

 Switch(Config-If-Ethernet1/0/2)#ipv6 security-ra enable

7.3 show ipv6 security-ra

 Command: show ipv6 security-ra [interface <interface-list>]

 Function: Display all the interfaces with IPv6 RA function enabled.