Qtech QSW-8200-28T-AC [84/114] Mac authentication bypass enable

Превью страниц Страница 84 / 114

User Manual

Chapter 9. Commands for MAB 84

www.qtech.ru

9.3 debug mac-authentication-bypass

 Command: debug mac-authentication-bypass {packet | event | binding}

 Function: Enable the debugging of the packet information, event information or

binding information for MAB authentication.

 Parameters: packet: Enable the debugging of the packet information for MAB

authentication.

 event: Enable the debugging of the event information for MAB

authentication.

 binding: Enable the debugging of the binding information for MAB

authentication.

 Command Mode: Admin Mode

 Default: None.

 Usage Guide: None.

 Example: Enable the debugging of the packet information for MAB authentication.

 Switch#debug mac-authentication-bypass packet

9.4 mac-authentication-bypass binding-limit

 Command: mac-authentication-bypass binding-limit <1-100>

 no mac-authentication-bypass binding-limit

 Function: Set the max binding number of MAB. The no command will restore the

default binding number as 3.

 Parameters: <1-100> the max binding number of MAB, ranging from 1 to 100.

 Command Mode: Port Mode

 Default: The max binding number of MAB is 3.

 Usage Guide: Set the max binding number of MAB. When the binding number reaches

to the max value, the port will stop binding, if the max binding number is less than the

current binding number of the port, the setting will be unsuccessful.

 Example: Configure the max binding number as 10.

 Switch(Config)#interface ethernet 1/0/1

 Switch(Config-If-Ethernet1/0/1)#mac-authentication-bypass binding-limit 10

9.5 mac-authentication-bypass enable

 Command: mac-authentication-bypass enable

 no mac-authentication-bypass enable

 Function: Enable the global and port MAB function. The no command disables MAB

function.

 Parameters: None.