Qtech QSW-8200-28T-POEAC- DC [16/38] Policy aggregate

User Manual

Chapter 1. Commands for QoS 16

www.qtech.ru

 Switch(config-policymap-1)#class cm

 Switch(config-policymap-1-class-cm)#policy 1000 2000 exceed-action set-internal-

priority 40

1.23 policy aggregate

 Command: policy aggregate <aggregate-policy-name>

 no policy aggregate

 Function: Police Map reference aggregate policy, applies an aggregate policy to

classified traffic; the no command deletes the specified aggregate policy.

 Parameters: <aggregate-policy-name> is the policy set name.

 Default: No policy is configured by default.

 Command mode: Policy class map configuration Mode

 Usage Guide: The same policy set can be referred to by different policy class maps.

 Example: Create class-map, the match rule is the cos value is 0; policy-map is 1, enter

the policy map mode, set the Policy and choose the color policy for the current list.

 Switch(config)#class-map cm

 Switch(config-classmap-cm)#match cos 0

 Switch(config-classmap-cm)#exit

 Switch(config)#policy-map 1

 Switch(config-policymap-1)#class cm

 Switch(config-policymap-1-class-cm)#policy aggregate color

1.24 policy-map

 Command: policy-map <policy-map-name>

 no policy-map <policy-map-name>

 Function: Creates a policy map and enters the policy map mode; the “no policy-map

<policy-map-name>” command deletes the specified policy map.

 Parameters: <policy-map-name> is the policy map name.

 Default: No policy map is configured by default.

 Command mode: Global Mode

 Usage Guide: classification matching and remarking can be done in policy map

configuration mode.

 Example: Creating and deleting a policy map named “p1”.

 Switch(config)#policy-map p1

 Switch(Config-PolicyMap-p1)#exit

 Switch(config)#no policy-map p1

1.25 service-policy input

 Command: service-policy input <policy-map-name>