Qtech QSW-8200-28T-POEAC- DC [5/38] Class map

User Manual

Chapter 1. Commands for QoS 5

www.qtech.ru

 Switch(Config-PolicyMap-p1)#class c2 insert-before c1

 Switch(Config-PolicyMap-p1-Class-c2)#exit

1.3 class-map

 Command: class-map <class-map-name>

 no class-map <class-map-name>

 Function: Creates a class map and enters class map mode; the no command deletes the

specified class map.

 Parameters: <class-map-name> is the class map name.

 Default: No class map is configured by default.

 Command mode: Global Mode

 Usage Guide:

 Example: Creating and then deleting a class map named “c1”.

 Switch(config)#class-map c1

 Switch(Config-ClassMap-c1)#exit

 Switch(config)#no class-map c1

1.4 clear mls qos statistics

 Command: clear mls qos statistics [interface <interface-name> | vlan <vlan-id>]

 Function: Clear accounting data of the specified ports or VLAN Policy Map. If there are

no parameters, clear accounting data of all policy map.

 Parameters: <vlan-id>: VLAN ID

o <interface-name>: The interface name

 Default: Do not set action.

 Command mode: Admin Mode

 Usage Guide: Clear accounting data of the specified ports or VLAN Policy Map. If there

are no parameters, clear accounting data of all policy map.

 Example: Clear the Policy Map statistic of VLAN 100.

 Switch#Clear mls qos statistics vlan 100

1.5 clear mls qos queue statistics

 Command: clear mls qos queue statistics [interface<Ethernet-name>]

 Function: Clear the queue statistics information on the port.

 Parameters: <Ethernet-name> port name, supports to use '-' or ';' to make up the port

name list.

 Default: None.

 Command Mode: Global mode.