Qtech QSW-8200-28T-POEAC- DC [26/38] Show mls qos vlan

User Manual

Chapter 1. Commands for QoS 26

www.qtech.ru

 Function: Read the queue statistics information on the port.

 Parameters: <Ethernet-name> port name, supports to use '-' or ';' to make up the port

name list.

 Default: None.

 Command Mode: Admin mode/Configuration mode.

 Usage Guide: If the port name was not appointed, print the statistics information of all

the ports. Otherwise, print the statistics information of the appointed port or appointed

port list.

 Example: Read the queue statistics information of 1/0/1; 1/0/3; 1/0/4 and 1/0/5.

 （config）#：show mls qos statistics interface Ethernet 1/0/1;3-5

1.35 show mls qos vlan

 Command: show mls qos vlan <v-id>

 Parameters: v-id: the ranging from 1 to 4094.

 Command Mode: Admin mode.

 Default: None.

 Example:

 Switch#show mls qos vlan 1

 Vlan 1:

 Attached Policy Map for Ingress: 1

 Classmap classified in-profile out-profile (in packets)

 1 NA NA NA

 Switch(config)#show mls qos vlan 7

 Vlan 7:

 Attached Policy Map for Ingress: 7

 Classmap classified in-profile out-profile (in packets)

 7 0 0 0

1.36 show mls qos aggregate-policy

 Command: show mls qos aggregate-policy [<aggregate-policy-name>]

 Function: Show aggregate-policy information of QoS.

 Parameter: <aggregate-policy-name> the aggregate-policy name

 Default: None.

 Command Mode: Admin mode and configuration mode

 Usage Guide: Show all or the specified aggregate-policy configuration.

 Example:

 Switch(config)#show mls qos aggregate-policy a2

 aggregate policy a2 10 10 10 exceed-action drop