Qtech QSW-8200-28T-POEAC- DC Команды для qos онлайн [29/38] 481628

User Manual

Chapter 2. Commands for Flow-based Redirection 29

www.qtech.ru

 Parameters: 1. No specified port, display the information of all the flow-based

redirection in the system.

 2. Specify ports in <IFNAME>, display the information of the flow-based

redirection configured in the ports listed in the interface-list.

 Command Mode: Admin Mode and Configuration Mode.

 Usage Guide: This command is used to display the information of current flow-based

redirection in the system/port.

 Examples:

 Switch(config)# show flow-based-redirect

 Flow-based-redirect config on interface ethernet 1/0/1:

 RX flow (access-list 1) is redirected to interface Ethernet1/0/6

2.4 vlan-port-redirect vlan maximum <1-1000>

 Command: vlan-port-redirect vlan maximum <1-1000>

o no vlan-port-redirect vlan maximum

 Command Mode: Global Mode.

 Function: Configure the maximum number of vlan of redirect on each port.

 Default: 500

 Parameters: maximum <1-1000>: maximum number of vlan

 Usage Guide: Configure the maximum number of vlan of redirect on each port.

 Example: Configure the maximum number of vlan of redirect on 1/0/1 as 600.

 (config)# vlan-port-redirect vlan maximum 600