Qtech QSW-8200-28F-AC-DC — настройка маршрутизации: команды для маршрутизирующей политики [12/74]

Превью страниц Страница 12 / 74

User Manual

Chapter 1. Commands for Routing Policy 12

www.qtech.ru

 Switch(config)#route-map r1 permit 5

 Switch(config-route-map)#match origin egp

1.12 match route-type

 Command: match route-type external <type-1 | type-2 >

 no match route-type external [<type-1 | type-2 >]

 Function: Configure to matching with the route type of OSPF routing message. The “no

match route-type external [<type-1 | type-2 >]” deletes the configuration.

 Parameter: type-1 means match with the OSPF type 1 external route, type-2 means

match with the OSPF type 2 external route.

 Command Mode: route-map mode

 Usage Guide: This command matches according to the type of OSPF routes (OSPF AS-

external LSA type is either type 1 or type 2). If the matching succeeded, then the

“permit” or “deny” action in the route-map is performed.

 Example:

 Switch#config terminal

 Switch(config)#route-map r1 permit 5

 Switch(config-route-map)#match route-type external type-1

1.13 match tag

 Command: match tag <tag-val >

 no match tag [<tag-val >]

 Function: Configure to matching with the tag domain of the OSPF routing message. The

“no match tag [<tag-val >]” deletes this configuration.

 Parameter: <tag-val > is the tag value, ranging between 0～4294967295.

 Command Mode: route-map mode

 Usage Guide: This command matches according to the tag value in the OSPF route. If

the matching succeeded, then the “permit” or “deny” action in the route-map is

performed.

 Example:

 Switch#config terminal

 Switch(config)#route-map r1 permit 5

 Switch(config-route-map)#match tag 60

1.14 route-map

 Command: route-map <map_name> {deny | permit} <sequence_num>

 no route-map <map_name> [{deny | permit} <sequence_num>]

 Function: Configure the route-map and entering the route-map mode. The “no route-

map <map_name> [{deny | permit} <sequence_num>]” command deletes route-map.