Beurer GL40 (mg/dL) Инструкция по эксплуатации онлайн [20/40] 54830

20 Beurer GL40 mg/dL

6 Pull back the tensioning device until you hear it click into pla-

ce. If it does not engage, the lancing device may have unin-

tentionally already been tensioned when inserting the needle

lancet and could already be engaged.

7 The lancing device can now be used to take the blood sam-

ple. Ensure that the blood remains in a droplet form and is not

smeared.

Blood sample from the fingertip

Place the lancing device firmly against the finger, slightly to

the side of the centre of the fingertip. Press the release but-

ton. Lift the lancing device from the finger. You need a round

blood drop of at least 0.6 microlitres to form (corresponds to

approx. 1.4 mm, original size: z).

Blood sample from an alternative site (AST)

Choose a site that is soft, not next to a bone, with no visible

veins and without excessive body hair. Warm the puncture

site to ensure good circulation, for example by lightly massag-

ing the area. Place and hold the lancing device against the

puncture site for a few seconds and press the release button.

Continue to hold the lancing device against your skin until a

round droplet of blood has formed under the cap. Keep apply-

ing pressure until the size of the blood drop is at least 0.6 mi-

crolitres (corresponds to approx. 1.4 mm, original size: z).

Lift the lancing device carefully away from the skin.

8 If insufficient blood was collected, increase the puncture

depth and repeat steps 5 to 7.

9 Untwist the cap and carefully remove it from the lancing de-

vice.