Festool OF 1010 EBQ-Plus (574335) [12/80] Ii 0 ii
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Festool OF 1010 EBQ-Plus (574335) [12/80] Ii 0 ii

Festool OF 1010 EBQ-Plus (574335) [12/80] Ii 0 ii
12
Symbols
Warning of general danger
Wear ear protection!
Wear protective goggles!
Wear a dust mask.
Read the Operating Instructions/Notes!
1 Intended use
The routers are designed for routing wood, plas-
tics and similar materials.
Aluminium and plasterboard can also be pro-
cessed with corresponding cutters such as are
listed in the Festool catalogues.
The user is liable for damage and injury
resulting from incorrect usage!
2 Safety instructions
2.1 Rules
WARNING! Read all safety warnings and
all instructions. Failure to follow the warn-
ings and instructions may result in electric shock,
fi re and/or serious injury.
Save all warnings and instructions for future
reference.
The term „power tool“ in the warnings refers
to your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
2.2 Tool-specifi c safety rules
- Hold power tool by insulated gripping surfaces,
because the cutter may contact its own cord.
Cutting a „live“ wire may make exposed metal
parts of the power tool “”live”” and could give
the operator an electric shock.
- Use clamps or another practical way to secure
and support the workpiece to a stable platform.
Holding the work by your hand or against the
body leaves it unstable and may lead to loss of
control.
- Do not exceed the maximum speed specifi ed on
the tool and/or keep to the speed range.
- The clamping collet should only be used to
clamp tools with a shank diameter appropriate
for the collet.
- Check that the cutter is fi rmly fi tted and runs
freely.
- The clamping collet and union nut must show
no signs of damage.
- Cracked or distorted cutters must not be used.
Wear suitable protection such as
ear protection, safety goggles, a
dust mask for work which gener-
ates dust, and protective gloves
when working with raw materials
and when changing tools.
- Festool electric power tools should only be
installed in work benches specially designed
by Festool. The electric power tool may become
unsafe and cause serious accident if installed
in benches from other manufacturers or self-
manufactured work benches.
3 Noise and vibration information
The typical values determined in accordance with
EN 60745 are:
Router
Technical data OF 1010 EBQ OF 1010 EQ OF 1010 Q
Power 1010 W 1010 W 720 W
Speed (no load) 10000 - 24000 rpm 9500 - 23000 rpm 26500 rpm
Quick height adjustment 55 mm 55 mm 55 mm
Fine height adjustment 8 mm 8 mm 8 mm
Drive shaft connection of the spindle
M16x1.5 M16x1.5 M16x1.5
Router diameter max. 35 mm max. 35 mm max. 35 mm
Weight (excluding cable) 2.7 kg 2.7 kg 2.7 kg
Degree of protection / II / II / II
The specifi ed illustrations can be found at the beginning of the operating instructions.

Содержание

Похожие устройства

GB Router Technical data OF 1010 ESQ Power 1010 w Speed no load 10000 24000 rpm Quick height adjustment 55 mm Fine height adjustment 8 mm Drive shaft connection of the spindle M16x1 5 Router diameter max 35 mm Weight excluding cable 2 7 kg Degree of protection 0 II OF 1010 EQ OF1010Q 1010 w 9500 23000 rpm 55 mm 8 mm M16x1 5 max 35 mm 2 7 kg 720 W 26500 rpm 55 mm 8 mm M16x1 5 max 35 mm 2 7 kg 0 II 0 II The specified illustrations can be found at the beginning of the operating instructions Symbols Warning of general danger Wear ear protection Wear protective goggles Wear a dust mask Read the Operating Instructions Notes 1 Intended use The routers are designed for routing wood plas tics and similar materials Aluminium and plasterboard can also be pro cessed with corresponding cutters such as are listed in the Festool catalogues The user is liable for damage and injury resulting from incorrect usage 2 2 1 C_Î_J Safety instructions Rules WARNING Read all safety warnings and all instructions Failure to follow the warn ings and instructions may result in electric shock fire and or serious injury Save all warnings and instructions for future reference The term power tool in the warnings refers to your mains operated corded power tool or battery operated cordless power tool 12 2 2 Tool specific safety rules Hold power tool by insulated gripping surfaces because the cutter may contact its own cord Cutting a live wire may make exposed metal parts of the power tool live and could give the operator an electric shock Use clamps or another practical way to secure and support the workpiece to a stable platform Holding the work by your hand or against the body leaves it unstable and may lead to loss of control Do not exceed the maximum speed specified on the tool and or keep to the speed range The clamping collet should only be used to clamp tools with a shank diameter appropriate for the collet Check that the cutter is firmly fitted and runs freely The clamping collet and union nut must show no signs of damage Cracked or distorted cutters must not be used Wear suitable protection such as ear protection safety goggles a dust mask for work which gener ates dust and protective gloves when working with raw materials and when changing tools Festool electric power tools should only be installed in work benches specially designed by Festool The electric power tool may become unsafe and cause serious accident if installed in benches from other manufacturers or selfmanufactured work benches 3 Noise and vibration information Thetypicalvaluesdetermined in accordance with EN 60745 are

Скачать